Solvent-Assisted Crystallization of Fatty Acid Alkyl Esters from Animal Fat

An easy and efficient method for the separation of saturated and unsaturated fatty acid mono alkyl esters, prepared from animal fat, was developed. The most efficient separation was achieved by the use of solvents such as methanol and acetone at low temperatures. The dilution of the alkyl esters with 10 times the amount of solvent (10:1 v/w) and storage of the mixture for 4 h at ?22 °C could be defined as optimum conditions. After filtration of the saturated fraction at the corresponding temperature very pure fractions were obtained. For fatty acid methyl esters deriving from tallow, with an initial content of saturated fatty acids of almost 50 %, a saturated ester fraction with only 5 % unsaturated fatty acids and an unsaturated ester fraction with about 9 % of saturated fatty acids could be obtained. The solvent easily could be recovered by distillation. In addition fatty acid ethyl, 1‐propyl, 2‐propyl, 1‐butyl, tert‐butyl and 3‐methyl‐1‐butyl esters were prepared and separated into saturated and unsaturated fractions. All fractions were analyzed according to the fatty acid compositions and showed similar or slightly worse results compared to the methyl esters. The cold filter plugging points of the unsaturated fractions were measured, showing the lowest value for the unsaturated methyl ester fraction at ?26 °C. The fractionation with the use of solvents is an easy tool in order to obtain fatty acid alkyl esters with excellent cold temperature behavior out of animal fat.     

The Optimization of the Production of Methyl Esters from Corn Oil Using Barium Hydroxide as a Heterogeneous Catalyst

In recent years, vegetable oils, as renewable raw materials, became a promising feedstock for chemicals and biodiesel production. The main products derived from oils are esters of fatty acids, especially methyl esters, obtained by their transesterification with methanol, in presence of acid or alkaline catalysts. The use of such catalysts implies the need for washing operations, which leads to environmental pollution. In the present paper, the response surface methodology based on a central composite design, has been developed to optimize the process of transesterification of corn oil. Ba(OH)₂ in presence of diethyl ether was used as catalyst. A quadratic polynomial equation was obtained. It correlates the reaction parameters [methanol/oil molar ratio (x _r), reaction time (x _t) and catalyst concentration (x _c)] with methyl esters yield. Analysis of variance analysis showed that only methanol/oil molar ratio and catalyst concentration have had the most significant influences on the conversion. The maximum methyl esters yield was obtained using the following optimum parameters: methanol/corn oil ratio of 11.32, reaction time of 118 min and catalyst concentration of 3.6 wt%.     

Hybrid dual-curable cyanate ester/boron phosphate composites via sequential thiol-ene photopolymerization and thermal polymerization

The aim of this study was to improve hybrid dual-curable cyanate ester/boron phosphate composites via sequential thiol-ene photopolymerization and thermal polymerization for high performance applications such as aerospace and electronic devices. A novel 2,2′-diallylbisphenol A dicyanate ester (DA-BADCy) which is the allyl group containing cyanate ester was synthesized and characterized. DA-BADCy, silicon containing monofunctional thiol compound, trifunctional thiol compound and boron phosphate were cured using both ultraviolet (UV) and thermal methods. Using thiol-ene system, cyanate ester formulations, which are normally prepared at high temperatures, were prepared at room temperature. This study maintains ease of application for cyanate esters. Thermal stability, flammability and thermal conductivity of the samples were evaluated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), limiting oxygen index (LOI) and laser flash method, respectively. The samples were characterized with the following analysis; gel content, water absorption capacity and stress–strain test. Hydrophobicity of the samples was determined by the contact angle measurements. Moreover, the surface morphology of the samples was investigated by a scanning electron microscopy (SEM–EDS). The obtained results prove that the composites have good thermal and mechanical properties and with the help of easier preparation techniques, they can be used in many applications such as aerospace, electronic devices, materials engineering.     

Gold(I)‐Catalyzed Tandem Reaction of γ‐Amino‐Substituted Propargylic Esters to Pyrrolines and its Application in the Formal Synthesis of (±)‐Aphanorphine

An effective synthesis of structurally diverse pyrroline derivatives has been accomplished by a gold(I)‐catalyzed tandem 1,3‐acyloxy rearrangement/intramolecular azacylization reaction of γ‐amino‐substituted propargylic esters in good to excellent chemical yields (52–98%). The reaction proceeds under extremely mild conditions and has also demonstrated its potential in a concise formal synthesis of (±)‐aphanorphine with a catalyst loading as low as 0.5 mol% to provide the key intermediate 5‐(4‐methoxybenzyl)‐1‐tosyl‐2,5‐dihydro‐1H‐pyrrol‐3‐yl pivalate on a gram scale.

     

Kinetic study of the hydrolysis of two formate esters held in a single organic drop

The rising drop technique was used to study the kinetics of the alkaline hydrolysis of two formate esters; n-butylformate and iso-amylformate in toluene formed the organic phase, whilst aqueous sodium hydroxide was used as the continuous phase. The effects of ester and alkali concentrations on the rate of the hydrolysis were studied. The order of the reaction was found to change with respect to the concentration of both reactants. Cetyltrimethylammoniumbromide (CTAB) was used as a possible catalyst for this liquid–liquid hydrolysis. When CTAB was added to the aqueous phase, enhancement of reaction was observed, whilst its addition to the organic phase caused inhibition of the hydrolysis. It is suggested that the enhancement of the reaction is due to the interaction of micelles in proximity to the interface while the inhibition is probably due to chemical blocking of the interface by adsorbed molecules of ionized CTAB.     

Studies on photo-crosslinkable polyphosphoramide esters containing divanillylidene cycloalkanone units

Two series of photo-crosslinkable polyphosphoramide esters were synthesized from 2,5-bis(4-hydroxy-3-methoxy benzylidene)cyclopentanone and 2,6-bis(4-hydroxy-3-methoxy benzylidene)cyclohexanone with various N-arylphosphoramide dichlorides by interfacial polycondensation using hexadecyl trimethylammonium bromide as phase transfer catalyst at ambient temperature. The resulting polymers were characterized by inherent viscosity, Fourier transform infra-red, ¹H and ¹³C nuclear magnetic resonance spectroscopy. The thermal stability of the polymers synthesized was evaluated by thermogravimetric analysis. These polymers were studied for their photo-chemical reactions. The divanillylidene cycloakanone groups in the polymer chain function as photo-active centres. Crosslinking proceeds via 2π + 2π cycloaddition reaction of the divanillylidene cycloalkanone moieties. The rate of crosslinking decreases with increase in the size of the cycloalkanone ring, while the thermal stability increases with increase in the size of the cycloalkanone ring.     

Synthetic and HVI compressor lubricants

This paper reviews the optimum synthetic and semi-synthetic lubricants for various types of compressors and gases being compressed. Several applications are given involving centrifugal, rotary, and reciprocating compressors. Gases include air, refrigerant, natural and other hydrocarbons, chemical processing and industrial. Included also are food grade air compressor applications. In addition, microlube systems for once-through cylinder lubrication of large reciprocating compressors designed to minimize gas contamination are also described.     

Rotary-vane compressors: Some technical aspects of long-life lubricants

Compressors are used all over the world for various individual applications; the current application concerns their use in the ozone process of water treatment. Technical data on different mineral and synthetic lubricants are given. In particular, a new oil was chosen for investigation. Field testing was undertaken over more than 6000 h on two different locations. Used oil monitoring was conducted by sampling during the experiment; analyses of physical and chemical parameters were made and their kinetics are described. Wear, viscometrics and ozone process interaction are discussed in this study.     

丙烯酸及酯的生产与消费

阐述国内外丙烯酸及酯的生产、消费、进出口情况及需求预测.     

磷酸酯型表面活性剂在染整工业中的应用

介绍了磷酸酯型表面活性剂特性、五氧化二磷与脂肪醇合成反应的一般工艺条件和不同分子结构对产品性能的影响.在染整工业中作为耐碱渗透剂、精练剂、丝光渗透剂,抗静电剂以及洗涤剂、阻燃剂已得到了广泛的使用.随着有机合成、表面化技术的进步,磷酸酯表面活性剂在染整工业中,应用必将日益扩大.