基于ANSYS的铸嘴流体耦合场三维有限元仿真分析

作者用大型有限元分析软件ANSYS对铸嘴内稳态层流铝熔体进行仿真分析。实现了三维建模。解决了三维热一流耦合求解的问题，得到铝流体的速度、压力及温度的分布图。分析了铸嘴出口速度和温度的分布规律及其对连续铸轧的影响。     

Electron transport in direct methanol fuel cells

A three-dimensional (3D), two-phase, isothermal model of direct methanol fuel cells (DMFCs) was employed to investigate effects of electron transport through the backing layer and the land in bipolar plates. It was found that the electronic resistance of the backing layer, affected by backing layer electronic conductivity, backing layer thickness and flow channel width, played a relatively important role in determining the current density distribution and cell performance. In order to ignore the electron transport effect on the average current density, the minimum electronic conductivity of the backing layer has to be 1000 S m⁻¹, with the relative error in the average current density less than 5%, under the given conditions.     

基于维间扩展和事务压缩的关联规则算法改进

Apriori是关联规则挖掘的经典算法,在利用该算法进行医疗数据挖掘的过程中,发现其频繁项集产生过程有一些不必要的开销,为此提出了改进算法Mypriori,利用维间扩展和事务压缩策略来提高频集发现的效率,并通过实验验证了算法的有效性.     

基于特征互补图像的人脸识别仿真研究

研究人脸识别精度问题。由于人脸图像中存在大量干扰信息的缺点,而造成了人脸识别正确率下降,为了解决上述问题,提出了一种基于特征互补图像快速特征融合算法。算法通过对人脸图像的位平面切片图像分析,采用位平面图像分解法,通过各种合成策略构造多幅样本图像。并突出高位平面图像,采用两种加权策略将每一幅人脸图像样本都生成"特征互补图像"。然后,直接用图像的二维典型相关分析(2DCCA)法对两种特征互补图像进行特征抽取。最后通过在ORL国际标准人脸库上进行的实验,结果表明,高位平面图像的典型相关鉴别特征提高了正确识别率,并且因为摒弃了原始人脸图像的大部分干扰信息所以具有更强的鲁棒性。     

医学CT断层图像三维重建的Matlab实现方法

介绍了运用Matlab软件进行CT断层图像的三维重建的原理及实现方法。运用计算机图形学和图像处理技术将计算机断层扫描（CT）等成像设备得到的人体断层二维图像序列,在计算机中重建成三维图像数据,并在屏幕上形象逼真地显示人体器官的立体视图。可以对重构出的器官图像进行诸如旋转、缩放等操作,重建方法简单,显示效果良好。     

对分课堂模式下高校思想政治理论课的教改探索

高校思想政治理论课的对分课堂,通过三分课堂教学过程,在理论与实践的互“观”中,借助生成性动态自主建构,使大学生能够立足于马克思主义的群众立场,运用马克思主义方法论,把马克思主义理论建立在知、情、意、行、信合一的群众实践之上,进而把自身知、情、意、行、信合一的实践融入马克思主义理论,使马克思主义理论在大学生思想政治教育中“落地”,是思想政治理论课的新型课堂教学模式。     

搅拌工具尺寸和工艺参数对塑料搅拌摩擦焊焊缝质量的影响

用不同尺寸的搅拌工具对聚氯乙烯(PVC)板材进行了搅拌摩擦对接焊工艺试验.试验证明,在搅拌工具肩部直径为30 mm,搅拌头直径为10 mm,搅拌头旋转速度为1 660 r/min,焊接速度为25 mm/min的情况下,可以得到焊缝饱满、成形美观的焊接接头.提高搅拌头的旋转速度可以成比例地提高焊接温度;焊接速度的影响较复杂,增大焊接速度一方面会降低焊接热输入,一方面又会间接地增大搅拌头的进给阻力,从而增大摩擦发热功率,提高焊接温度;搅拌工具肩部直径直接影响肩部与被焊材料表面的摩擦发热功率,增大肩部直径可以提高焊接温度,还有利于阻止焊缝材料的飞溅和外溢;而搅拌头直径的影响较复杂,增大它既可以提高搅拌头侧面与被焊材料之间的相对运动线速度,从而提高焊接温度,又会增加被焊材料的吸热功率和传热面积,从而降低焊接温度.     

高维空间球集覆盖问题的改进1+ε近似算法

高维空间球集的覆盖问题是指对高维空间中多个球构成的集合S,构造一个直径最小的球来覆盖S中所有已知球。本文提出了球集直径的概念,给出求解球集直径的1/3~(1/2)近似算法。基于此算法求解球集实例集合S的初始核心集,进而给出高维空间球集覆盖问题的1+ε近似算法,算法时间复杂度为O(nd/ε+d2/ε3/2(1/ε+d)lg1/ε)。算法保证核心集中球的个数为O(1/ε),与S中球的个数和空间维数无关。     

Cognitive-Mathematical Approaches for Evaluating Architectural Contextual Fit

The main goal of this study is to apply a scientific quantitative approach to the investigation of contextual fit. This is approached mathematically within the framework of cognitive science and research on categorization and prototypes. Two experiments investigated two leading mathematical-cognitive approaches for explaining people’s judgment of contextual fit of a new building with an architectural/urban context: prototype approach and feature frequency approach. The basic concept is that people represent the built environment via architectural prototypes and/or frequencies of encountered architectural features. In the first experiment, a group of twelve participants performed rank order tasks on artificially created architectural patterns, for the purpose of psychological scaling. Perceptual distances among all patterns were mathematically determined. In the second experiment, three groups of architectural patterns were constructed to represent assumed architectural contexts. The prototype of each context was mathematically determined according to prototype cognitive model, and based on the distances calculated in the first experiment. Fifty-six students participated in the main experiment, in which they rank ordered a group of fifteen architectural patterns in terms of contextual fit to each of the three architectural contexts. Participants’ rank order data of the fifteen patterns were regressed on both the perceptual distances from prototypes, and numbers of features shared with each architectural context. Results indicated that both prototype and feature frequency approaches significantly accounted for important portions of participants’ judgments. However, participants tended to prefer one approach to the other according to context composition. Results have implications for both research on utilizing cognitive-mathematical models in architectural research and on urban design guidelines and control.     

Incorporating anthropometry into design of ear-related products

To achieve mass customization and collaborative product design, human factors and ergonomics should play a key development role. The purpose of this study was to provide product designers with the anthropometic dimensions of outer ears for different demographic data, including gender and age. The second purpose was to compare the dimensions of various ear-related products (i.e., earphone, bluetooth earphone and ear-cup earphone) with the anthropometic database and recommend appropriate solutions for design. Two hundred subjects aged 20-59 was selected for this study and divided into four age stratifications. Further, three different dimensions of the outer ear (i.e., the earhole length, the ear connection length and the length of the pinna) were measured by superimposed grid photographic technique. The analysis of variance (ANOVA) was used to investigate the effects of gender, and age on ear dimensions. The results showed that all ear dimensions had significant gender effects. A comparison between the anthropometric dimensions and those of current products revealed that most current ear-related products need to be redesigned using anthropometric data. The shapes of earhole and pinna are not circular. Consequently, ear products need to be elongated so that users may feel more comfortably and not have the product slip off easily.