Optimization of LED‐based light blendings for object presentation

This study looks at the perceived quality of light‐emitting diode (LED)‐based lighting of various colors. The objective was to find out whether LEDs could provide better (i.e., more relevant and acceptable) lighting than that which is obtained with standard halogen or fluorescent sources. The perception of objects was assessed under different lighting schemes. Subjects were invited to add red, cyan and/or amber to white LED‐based light to match the halogen and fluorescence rendering on specific targets: a color chart and a painting. They were also asked to rate the difference between the two, and to express their preference. The results obtained for the perception of LED‐based lighting were quite positive. Color blendings of LED light were found to provide illuminated situations similar to halogens or fluorescent sources. These blendings were well accepted, and indeed often preferred, although the color rendering index (CRI) was always low. This indicates that the CRI as it stands is inadequate to characterize the color rendering of solid‐state light sources, and needs to be updated. LED‐based lighting systems seem to have considerable potential for use in shops and display units, where they may well outperform existing lighting systems. © 2009 Wiley Periodicals, Inc. Col Res Appl, 34, 310–320, 2009     

基于对称螺旋型电感和差分二极管的2.4GHz CMOS正交输出压控振荡器

提出了一种产生2.4GHz正交本地振荡信号的方法.它将LC-VCO和两级环路振荡器两种结构组合起来以实现正交输出的低相位噪声压控振荡器.LC网络是由在片对称螺旋型电感和差分二极管组成的.详细论述了VCO原理及其噪声性能.该电路已经用0.25μm单层多晶、五层金属N阱CMOS数字工艺制作.测量结果表明:它可以提供正交的本地振荡信号,其振荡频率可以在300MHz的范围内调节,当仅对差分输出振荡信号的一端进行测试时,振荡频率为2.41GHz时,去偏移中心为600kHz时的相位噪声为-104.33dBc/Hz.而且,它能在很低的电源电压下工作,功耗也很低,所以,它在集成收发机中将得到广泛的应用.     

High‐Conductivity Poly(3,4‐ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices

The conductivity of a poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film can be enhanced by more than two orders of magnitude by adding a compound with two or more polar groups, such as ethylene glycol, meso‐erythritol (1,2,3,4‐tetrahydroxybutane), or 2‐nitroenthanol, to an aqueous solution of PEDOT:PSS. The mechanism for this conductivity enhancement is studied, and a new mechanism proposed. Raman spectroscopy indicates an effect of the liquid additive on the chemical structure of the PEDOT chains, which suggests a conformational change of PEDOT chains in the film. Both coil and linear conformations or an expanded‐coil conformation of the PEDOT chains may be present in the untreated PEDOT:PSS film, and the linear or expanded‐coil conformations may become dominant in the treated PEDOT:PSS film. This conformational change results in the enhancement of charge‐carrier mobility in the film and leads to an enhanced conductivity. The high‐conductivity PEDOT:PSS film is ideal as an electrode for polymer optoelectronic devices. Polymer light‐emitting diodes and photovoltaic cells fabricated using such high‐conductivity PEDOT:PSS films as the anode exhibit a high performance, close to that obtained using indium tin oxide as the anode.     

Small signal modeling of GaAs PIN diodes aided by electromagnetic analysis

A systematic procedure is described for determination of GaAs PIN diode equivalent circuit models from measured S‐parameter data combined with an electromagnetic analysis of the feed structure. A new parasitic and intrinsic model topology is proposed, and found to be better suited than prior models for the particular GaAs PIN structures considered in this work. Models were developed for forward bias currents ranging from 0.01 to 100 mA, and example measured and modeled results are included to validate the approach. © 2001 John Wiley & Sons, Inc. Int J RF and Microwave CAE 11: 61–68, 2001.     

高功率脉冲对PIN 限幅器的毁伤效应研究

本文针对PIN限幅器在高功率脉冲下的毁伤效应，对PIN限幅器归一化吸收、负载和反射功率与阻抗关系进行了 理论分析，并对高功率脉冲注入下PIN 限幅器的瞬态响应进行了仿真分析，结果表明当输入脉冲上升沿小于5ns，输入功 率大于200mW时，限幅器出现明显的尖峰泄漏现象，并且限幅能力趋于饱和，试验结果也验证了仿真分析结果的有效性。     

Application of Multimode Laser Diodes in the Interrogation of Fiber Bragg Grating Sensors

The interrogation of fiber Bragg grating sensors with multimode laser diodes is theoretically and experimentally analyzed using two different approaches: serrodyne and dithering techniques. It is also demonstrated that by using several laser modes it is possible to enhance the measurement range without compromising sensitivity.     

White organic light-emitting diodes using a quantum dot as a color changing material

White organic light-emitting diodes (WOLEDs) were fabricated by using a blue emitting layer combined with quantum dot (QD) based color converting materials. Orange emitting QD was used as a color converting material and effective color conversion was realized. A white color coordinate of (0.32, 0.41) was obtained with a current efficiency of 8.3 cd/A at 1000 cd/m².     

Accelerated life-test experiments on low-power rectifier diodes

Low-power rectifier diodes were stressed by different forward currents I_F, reverse voltages U_R, and ambient temperatures _a for a time interval (0, t*) in order to analyse the resulting distributions. Owing to the limitations in the test time, t*, the gathering of comprehensive information about their performance requires high stress levels without exceeding either physical limits or the limits for initiating thermal runaway. First, the results of lifetime experiments related to the middle stress region were described by a Weibull distribution with constant shape parameter and stress-dependent scale parameter. This model, however, did not fit sufficiently the typical features of the real-life distribution. Therefore a non-parametric measure called the average initial reliability in (O,t*) was defined using the experimental results. Its stress dependence was estimated. The results are guiding figures of stress conditions both for accelerated tests and for circuits with high demands on reliability.