对梁,底组合步进式加热炉半热滑轨的改进实践

介绍了间断式半热滑轨的研制和应用过程，以及经过节能技术改造，用新型半热滑轨代替老式滑轨的使用。实践表明，不但解决了以往的水梁漏水的问题，而且使线Ｃ级品率提高了３．３９％，每年可增产３５００ｔ线材，吨钢热涌单耗降低０．１４ＧＪ，年创经济效益２３９万元。     

Comparing ANN and GMM in a voice conversion framework

In this paper, we present a comparative analysis of artificial neural networks (ANNs) and Gaussian mixture models (GMMs) for design of voice conversion system using line spectral frequencies (LSFs) as feature vectors. Both the ANN and GMM based models are explored to capture nonlinear mapping functions for modifying the vocal tract characteristics of a source speaker according to a desired target speaker. The LSFs are used to represent the vocal tract transfer function of a particular speaker. Mapping of the intonation patterns (pitch contour) is carried out using a codebook based model at segmental level. The energy profile of the signal is modified using a fixed scaling factor defined between the source and target speakers at the segmental level. Two different methods for residual modification such as residual copying and residual selection methods are used to generate the target residual signal. The performance of ANN and GMM based voice conversion (VC) system are conducted using subjective and objective measures. The results indicate that the proposed ANN-based model using LSFs feature set may be used as an alternative to state-of-the-art GMM-based models used to design a voice conversion system.     

FK6-600牵伸加弹机上“格里森”制齿轮的国产化与改进

对FK6-600牵伸加弹机主传动中"格里森"制圆弧螺旋齿轮的失效情况进行了考察和研究。通过对德国DIN867和我国JB110标准的分析,采用了等顶隙收缩齿并对其进行了合理改进,同时在现场安装工作中采取了必要措施,取得了较好的技术经济效果。     

硅烷涂层提升钢纤维-砂浆界面性能的试验研究

为了提升钢纤维-砂浆界面的黏结性能,采用9种基于硅烷的表面处理剂对钢纤维进行浸渍处理并高温固化成膜;埋置于水泥砂浆圆柱体试块中,开展单根纤维拉拔试验,获得拉拔荷载-位移曲线. 试验结果表明,采用不同的硅烷涂层对钢纤维进行表面改性,可以不同程度地改善钢纤维-砂浆界面的黏结性能;拉拔峰值荷载最高增加5.75倍,拉拔能耗最多增加2.48倍. 硅烷Z6011和Z6020及复合涂层能够较大幅度地提升界面黏结强度,主要增加钢纤维与砂浆界面的化学黏结力;硅烷Z6030和Z6040及复合涂层对界面黏结强度的提升幅度相对较小,主要增加界面滑移摩擦力. 采用扫描电子显微镜（SEM）研究界面黏结性能的提升机理,发现硅烷涂层使得界面过渡区的微观结构更致密,显著提升了钢纤维-砂浆之间的黏结性能.     

某660 MW火电机组调试期间DCS逻辑优化与修改

DCS系统调试的质量与机组顺利投产和安全运行紧密相关。新建火电机组DCS系统逻辑组态由于多方面原因往往存在着单点保护、与设备不契合、延时设置错误、功能缺陷等问题。文章结合调试期间实际典型案例对DCS逻辑组态的优化与修改进行归纳总结,为基建机组逻辑设计与调试提供参考。     

铝质材料的摩擦学表面改性

铝质材料阳极氧化膜系均匀、规则的微观多孔质结构，利用物理、化学或电化学的方法在其中沉积或原位合成润滑性物质，在保持阳极氧化膜质硬、耐磨特性的基础上，使其具有一定的白润滑性，是近十多年来铝质材料表面改性研究的热点领域之一，本文对该研究的基本原理和国内外发展概况进行了概述，并重点介绍了我们在这一方面研究中的一些最新进展和结果，分别介绍了三种新型体系的自润滑改性阳极氧化铝材料．     

过热度对电脉冲孕育处理Al-5%CU合金凝固组织的影响

研究了不同的过热度对电脉冲孕育处理Al-5％Cu合金凝同组织的影响。实验结果表明：不同的过热度下对Al-5％Cu合金进行电脉冲处理，合金凝同组织均得到一定程度的细化，但过热度不同时细化效果不同。一定温度范围内．熔体温度为740℃时，电脉冲孕育处理细化的效果最好，并分析了过热度影响电脉冲孕育处理Al-5％Cu合金凝同组织的机制。     

改善Fe-B-C合金韧性的研究

为了提高Fe-B-C合金的韧性,应用稀土-钛-氮复合变质剂改善Fe-B-C合金组织和性能。结果发现,Fe-B-C合金复合变质处理后的凝固组织明显细化,且组织分布均匀,并出现钛硼化合物,钛硼化合物不同于普通Fe-B-C合金中的Fe2B呈网状分布,而是呈断网状和块状分布,特别是经高温热处理后,硼化物变成球状和棒状,Fe-B-C合金韧性明显提高,由8～10 J/cm2提高至22～25 J/cm2。经变质处理的Fe-B-C合金可用于制造轧钢机导卫板,其耐磨性比高镍铬合金钢提高1.3倍。     

Selective preparation of light aromatic hydrocarbons from catalytic fast pyrolysis vapors of coal tar asphaltene over transition metal ion modified zeolites

The catalytic cracking of coal tar asphaltene (CTA) pyrolysis vapors was carried out over transition met-alion modified zeolites to promote the generation of light aromatic hydrocarbons (L-ArHs) in a pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) micro-reactor system.The effects of ultra stable Y(USY),Co/USY and Mo/USY on the selectivity and yield of L-ArHs products and the extent of deoxygena-tion (Edeoxygenation),lightweight (Elightweight) from CTA pyrolysis volatiles were investigated.Results showed that the yields of L-ArHs are mainly controlled by the acid sites and specific surface area of the catalysts,while the deoxygenation effect is determined by theirs pore size.The Elightweight of CTA pyrolysis volatiles over USY is 9.65％,while the Edeoxygenation of CTA pyrolysis volatiles over Mo/USY reaches 20.85％.Additionally,the modified zeolites (Mo/USY and Co/USY) exhibit better performance than USY on L-ArHs production,owing to the synergistic effect of metal ions (Mo,Co) and acid sites of USY.Compared with the non-catalytic fast pyrolysis of CTA,the total yield of L-ArHs obtained over USY (4032 mg·kg-1),Co/USY (4363 mg·kg-1) and Mo/USY (4953 mg·kg-1) were increased by 27.03％,38.19％ and 54.78％,respectively.Furthermore,the possible catalytic conversion mechanism of transition metal ion (Co and Mo) modified zeolites was proposed based on the distribution of products and the characterizations of catalysts.     

SiO2改性聚丙烯纤维棉对油水乳状液的高效分离

近年来,基于特殊润湿性理论制备表面具有微纳米粗糙结构的多孔材料成为油水分离领域研究的重点。为了满足不同环境下对不同形式油-水乳状液高效高通量分离的需求,该研究利用纳米SiO2颗粒对聚丙烯（PP）纤维棉有针对性地亲（疏）水改性,构建了系列不同润湿性和粗糙度的PP纤维棉,探究了不同孔隙度和表面能的PP纤维棉对W/O及O/W型乳状液的分离性能,结果表明,经过亲（疏）水改性后的PP纤维棉对水/正己烷和水/甲苯乳状液的分离效率都高于99.5%,通量高于700 L/(m2·h),并针对不同形式油-水乳状液阐释其相应的分离机制,为后续油-水乳状液分离材料的科学设计和可控制备提供了理论依据。