钛合金植入物材料的表面改性研究进展

简介了钛合金植入物材料的开发及表面改性技术。     

The Bisphosphonate Clodronate Modifying Hydroxyapatite Bioceramics for Bone Scaffold

To investigate the efficiency of clodronate modifying HA bioceramics,and to evaluate the effect of clodronate modifying HA bioceramics on the cells in vitro,clodronate modified the porous HA bioceramics for bone scaffold by chelation .The outermost layer of the specimens was analyzd by XPS and FI-IR ,The depth profile was investigated by the argon-ion sputtering method.The cell culture test was conducted using MC3T3-E1 osteoblastic cells,The cells were inoculated and cultured on the scaffolds.Morphological observation of the cells,MTT test and ALP activity test evaluated the cell attachment ,proliferation and activity on the scaffolds.The cell culture test in cell quantity and morphology indicated active proliferation of the cells on the scaffolds.The ALP activity of the cells cultured for 3d and 7d on clodronate-HA bioceramics was slightly higher than that on HA bioceramics ,but the difference was not signifcant,This result indicated that clodronate-HA bioeramics had favorable cytocompatibility to be used as bone scaffold with potential ability to improve asteogensis.     

聚合物复合材料填充剂的改性

在前人研究的基础之上，归纳总结了聚合物复合材料填充剂的种类，综述了对其进行表面改性的目的、条件、方法、工艺以及对改性结果的表征等。文章还分析了影响填充聚合物复合材料性能的因素，指出了今后发展的方向。     

用SBR1502胶浆制取道路沥青改性用胶乳

用附聚法和降粘法浓缩ＳＢＲ１５０２胶浆制取道路沥青改性用胶乳。结果表明：总固物质量分数可由（２１±２）％上升到４５％～５０％。该胶乳与齐鲁石化公司炼油厂１００号乙沥青混合，改性后的道路沥青具有良好的使用性能，可满足高等级路面沥青的技术要求。     

聚乳酸的改性以及活性聚合方法

对聚乳酸这种具有生物降解性和生物相容性的高分子材料的化学改性和活性聚合近年来的研究工作进行了综述，化学改性主要涉及丙交酯和水溶性聚合物的共聚，而许多物质可以引发丙交酯的活性聚合，特别是带官能团的烷氧基类化合物更具有实际的应用价值。     

抗高温磨损高铬铸铁的研究

经Mo、B、V、Ti合金化和RE变质处理的高铬铸铁，具有优良的抗高温磨损性能和强韧性，用于制造筛分高温烧结矿的振动筛筛板，使用寿命比ZG30Cr18Mn12Si2N耐热钢筛板提高2倍以上。多元高铬铸铁筛板制造工艺简单，成本低，值得在筛分领域推广使用。     

离子注入对Cr12MoV钢表面组织结构和力学性能的影响

研究了Ｃｒ１２ＭｏＶ钢离子注入层的显微组织特征及其对表面性能的影响。结果表明，离子注入使Ｃｒ１２ＭｏＶ钢的表面硬度和耐磨性能得到显著改善，且存在着一个最佳的注入剂量，约为３×１０＾１＾７Ｎ＾＋／ｃｍ＾２左右。离了注入在Ｃｒ１２ＭｏＶ钢表面层中形成了大量细小弥散的第二相粒子，并使α－Ｆｅ晶格发生严重畸变，从而引起材料表面强化。     

Characterization and modification of fillers for paints and coatings

This paper highlights the possibility of inverse gas chromatography for the surface characterization of common fillers (CaCO₃, talc, SiO₂,) for paints and coatings. Divided solids are described, on the one hand, by the dispersive component of their surface energy and, on the other, by a specific parameter indicating their acid-base interaction potential. The role of the surface morphology at a molecular level is also examined. It is demonstrated that steric effects play an important role in the adsorption of probes on lamellar solids like talc. The consequences of surface treatments as well as examples of practical applications are also reported.     

Rheological properties of polypropylene modified by high‐intensity ultrasonic waves

A new method using high‐intensity ultrasonic waves, instead of peroxide‐aided reactive extrusion, was applied to modify a linear polypropylene into a branched structure. The ultrasonic waves induced chain scission and created reactive macromolecules of polypropylene successfully in the melt state without any peroxide. To enhance and control the recombination reaction during sonication, a multifunctional agent and an antioxidant were used. The rheological property measurements clearly confirmed that the modified polypropylene had a nonlinear branched structure. It showed shear‐thinning behaviors in its viscosities at low frequencies, high elastic behaviors in Cole–Cole plots, and a high rheological polydispersity index in comparison with a linear polypropylene. The degradation or recombination of polypropylene was adequately controlled by an antioxidant, which stabilized the structure during sonication. Also, the use of an antioxidant was quite effective in improving the extrusion processability by delaying the instability of the extrudate to a higher shear rate. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

ZnS掺杂技术研究及应用现状

对现阶段国内外在ZnS及ZnS基材料掺杂改性方面的研究成果作一概述性介绍，综述了纳米级ZnS发光材料掺杂改性的基本机理，主要的掺杂技术、方法，并对多种掺杂元素的效果进行了分析比较。