Pd负载量对多孔ITO材料CO气敏性的影响

采用粉末冶金法制备了不同Pd负载量的多孔ITO材料,通过XRD、SEM、EDS等对相应的物相和显微组织进行了分析.结果显示:粉末冶金法制备的负载Pd的多孔ITO材料,孔隙较多,孔的大小和分布十分均匀.Pd以微小团簇弥散分布于ITO材料上,Pd的理论和实际负载量较一致,含量的多少对ITO材料的孔结构没有影响.通过对CO气体的灵敏度测试表明,Pd的负载能提高多孔ITO材料对CO气体的灵敏度,含量的多少对CO气体的灵敏度有较大影响.     

在可溶性聚合物体系中光化学法制备Pd纳米粒子的研究

研究了在可溶性聚合物体系中Pd纳米粒子的光化学合成.Pd(Ⅱ)-PEG-丙酮溶液以紫外波长300nm光辐照,获得了胶体Pd纳米粒子并对其进行TEM表征.结果表明,Pd粒子的平均粒径为1.8～5.7nm,具有好的分散性.研究了各种组分的影响,探讨了体系中Pd(Ⅱ)的快速光化学还原和纳米Pd粒子的稳定性机理.     

Formation and crystallization of bulk Pd_(82)Si_(18) amorphous alloys

1　INTRODUCTIONMetallicglassisregardedasastatethatisofdis orderunlikecrystalalloyswith periodicatomstruc ture.Soitshowsexcellentcapabilitiesofsoftmag netism ,mechanics ,corrosionresistance ,etc .How ever ,mostofamorphousalloyswereproducedbyus ingrapidsolidificationmethodssuchassplatquench ing ,meltspinning ,andsoon ,withcharacteristiccoolingratesof 10 4 10 6 K/s .Becauseamorphousal loysarepreparedwithsilk ,powderandribbon ,itisgreatlylimitedinengineeringapplication .Recently ,severalbulk…     

金属蜂窝负载Pd催化甲烷部分氧化制合成气

采用浸渍法制备负载金属Pd(其中金属Pd含量0.6g/L)活性组分的金属蜂窝载体催化剂,应用于甲烷部分氧化制合成气。实验表明,焙烧温度为950℃的催化剂较600℃的催化剂甲烷转化率、CO和H2的选择性更高,焙烧温度为950℃的催化剂在反应温度800℃,GHSV=1×105ml/g·h条件下,甲烷转化率为91%,CO和H2的选择性分别达到90%和89%。用SEM与XPS对催化剂进行表征,结果表明,950℃焙烧催化剂并没有出现明显的烧结现象,且可能由于更多零价Pd的出现,使得该催化剂的性能更好。由于金属蜂窝载体优良的导热性,对950℃焙烧温度制备的金属蜂窝催化剂,催化剂床层的飞温点温度小于880℃,可以解决其它类型催化剂在甲烷部分氧化反应中出现的飞温问题,具有一定的工业化意义。     

金、银、铂、钯合金中钯的选择性滴定方法的研究与应用

建立了丁二肟选择性沉淀分离和析出EDTA-Pd络合物中的EDTA,Pb(NO3)2返滴定测定Pd的新方法,系统地研究了在硝酸或盐酸介质中测定Pd的条件,并对比了本法与《国家标准》分析方法的结果.研究表明:2种方法测得Pd的结果吻合,测定5～30mg Pd,相对误差-0.17% ～ 0.20%;但拟定方法的选择性好,适用性强,分析快速,操作简便、易于掌握.方法已应用于Au、Ag、Pt、Pd合金中5%～99%的Pd含量的测定,结果满意.     

Ag-Pd-5Ru-Gd四元系部分相图的700℃等温截面

在Ag Pd Gd ,Ag Pd Ru ,Ag Ru Gd和Pd Ru Gd三元系合金相图的基础上 ,采用X射线衍射 ,差热分析、扫描电镜和显微金相分析等方法研究了Ag Pd Ru Gd(x(Ru) =5 % ,x(Gd) <2 5 % )四元系相图的 70 0℃等温截面。结果表明 :该截面上包含有 2个单相区 ,即Pd(Ag)和Pd3 Gd ;4个两相区 ,即Pd(Ag) (Ru) ,Pd(Ag) Pd3 Gd ,(Ru) Ag51Gd14 ,(Ru) Pd3 Gd ;3个三相区 ,即Pd(Ag) Pd3 Gd (Ru) ,Pd(Ag) Ag51Gd14 (Ru) ,Pd3 Gd Ag51Gd14 (Ru) ;1个四相区 ,即Pd(Ag) Pd3 Gd Ag51Gd14 (Ru)。未发现新的四元中间相     

Evaluation of hydrogen absorption properties of Ti–0.2 mass% Pd alloy in fluoride solutions

The hydrogen absorption properties of Ti–0.2 mass% Pd (Ti–0.2Pd) alloy in 2.0% and 0.2% acidulated phosphate fluoride (APF) and neutral 2.0% NaF solutions (25 °C) has been evaluated by hydrogen thermal desorption analysis. During the early stage of immersion (120 h) in the 2.0% APF solution, the amount of absorbed hydrogen was lower than 500 mass ppm. A thermal desorption of hydrogen primary appearing with a peak at 500–600 °C and a broad desorption ranging from 100 to 400 °C were observed. In the 0.2% APF solution, the amount of absorbed hydrogen saturated at 100–200 mass ppm; the thermal desorption of hydrogen appeared with a single peak at 550 °C. In the 2.0% NaF solution, hydrogen absorption was negligible even after 1000 h of immersion, although corrosion pits were observed. The results of the present study suggest that the hydrogen absorption of Ti–0.2Pd alloy, as compared with commercial pure titanium, is suppressed in fluoride solutions.     

Application of auger electron spectroscopy and inert metal marker techniques to determine metal and oxygen transport in oxide films on metals

Auger electron spectroscopy in combination with depth profiling by Ar ion sputtering was employed as a surface analytical technique to determine the positions of thin (3–5 nm) inert Pd markers during growth of oxide films on Al, Ni, and -NiAl. Alumina films 35 and 120 nm thick formed on Al and -NiAl, respectively, grew by inward diffusion of oxygen. Metal migration accounted predominantly for the growth of a NiO film 150 nm thick on the (111) crystal face of Ni. However, an assessment could not be made with respect to oxygen diffusion, if any, in this film due to the limitations imposed on precise depth profiling of the marker position caused by uneven sputtering of the oxide and metal phases.     

Co/Cr/Pd多层膜的磁性及其准确性

研究了测量程序对不同Cr层厚度的Co／Cr／Pd多层膜磁性的影响，分析了反磁化机理在不同测量程序中对磁性准确性的影响。     

Hydrogen sensor based on Pd-functionalized film bulk acoustic resonator

We present an application of the Pd-functionalized film bulk acoustic resonator for hydrogen detection. The resonator consisted of an AlN piezoelectric stack and a Bragg reflector has a working resonance near 2.23 GHz and a high performance. A 50 nm thick Pd film was coated on the top electrode as a specific layer to capture hydrogen. The absorption of hydrogen can trigger changes of elastic properties of the Pd layer, which affects the resonance frequency of the resonator. The experimental results show that the Pd-functionalized film bulk acoustic resonator can yield a rapid, sensitive, reversible and reproducible response to hydrogen in the concentrations from 0.3% to 2%. The advantages of this sensor, including the simple fabrication process, ease of detection method, rapid response and high sensitivity and working at room temperature, make this promising in the early alarm of hydrogen leaking.