极尖断面为折线的四极透镜磁性能研究

对传统双曲线极尖的四极透镜进行了磁性能分析。在此基础上，提出了极尖断面为折线的四极透镜结构。磁场的数值分析以及测量结果表明：该结构产生的场梯度均匀，且具有磁场集中、磁场梯度高、便于加工和安装的对称性控制等优点。该结构的四极透镜已用于ＣＹＣＩＡＥ－３０回旋加速器和ＨＩ－１３串列加速器束流输运线之中     

Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

Continuous Separation of Inclusions from Aluminum Melt Flowing in a Circular Pipe using a High Frequency Magnetic Field

The continuous separation of inclusions from aluminum melt flowing in a circular pipe using a high frequency magneticfield was investigated both theoretically and experimentally The separation efficiency was calculated based on thetrajectory method and compared with experimental results. It is found that the separation efficiency is a functilnondimensional parameters t_i·d_p~2B_e~2/μ_fμ_eα~2 and α/δ.The effective way to improve the separation efficiency is to increasethe effective magnetic flux density and decrease the pipe radius. and the value of α/δ should be kept about 2 in orderto obtain the optimum separation efficiency.     

Modeling flotation separation in a semi-batch process

A model for a semi-batch flotation separation process has been developed, based on available microprocess probabilities, and compared to experimental data obtained using a WEMCO laboratory flotation cell. In general, the model predicts the correct experimental trends. In many cases, the model also predicts removal efficiency very well. Parametric studies reveal that the model predictions are sensitive to a stability parameter, the turbulent energy density in the flotation cell, the contact angle between the solid particle and fluid, and the ratio of initial-to-critical film thickness.     

制备方法对复合触头材料导电特性的影响

根据复合材料制备方法的各自特点 ,建立了计算复合触头材料电导率的三维单元网络模型。应用该模型研究了制备方法对材料电导率的影响 ,并与测量值进行了比较。结果表明了这种模型的可行性。     

用于铁谱分析磁化液使用规范的研究

本文简述了铁谱分析技术和磁化液的基本原理。在大量试验的基础上，建立了用于铁谱分析技术磁化液的使用规范。     

Magnetic separations in biotechnology—a review

Magnetic separation technology has a broad range of potential applications in both small and large scale biotechnology. This review considers a selection of magnetic techniques and their possible uses.     

工艺条件对薄片陶瓷材料凝胶流延成型的影响

利用有机单体的聚合原理，成功进行了陶瓷薄片材料的凝胶流延成型。讨论了工艺条件对成型的影响。使用惰性气氛保护克服了单体聚合反应中的氧气阻聚问题，浆料在一定温度和气氛条件下能够顺利完成聚合反应。所成型的坯体具有良好的强度和柔韧性，在1550℃经2h烧结，烧结样品显微结构均匀，没有发现晶粒异常长大现象，烧结体致密度达到97．7％。     

电磁六极透镜的磁场分布

本文叙述了一种可用于电子显微镜不差矫Ｅ系统的电磁六极透镜的磁场分布研究结果。研究工作系统实验测定磁场分布和理论分析相结合的方法，给出了六极透镜磁感应强度各分量的数值和近似公式，特别着重分析了六极边缘区域的磁场分布情况。     

肝脏占位的B超与MRI图像诊断分析

肝癌、肝血管瘤、肝囊肿是肝内常见占位性病变．笔者在临床工作中发现B超与MRI联合应用。其互补作用可提高肝脏占位的诊断率。本文通过对筛选出来的84例经B超与MRI诊断的肝脏占位病变进行分析。