Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

孔型热轧时轧制力的实用计算公式

采用修正系数法,利用板材在带刻槽的冲头进行深冲与平面冲头下深冲时的接触压力的比值确定孔型影响系数,进而推导出孔型热轧时轧制力的实用计算公式.     

Effect of Calcium Lactate, 4-Hexyl Resorcinol and Vacuum Packing on Physico-chemical, Sensory and Microbiological Qualities of Minimally Processed Litchi (Litchi chinensis Sonn.)

Litchi (Litchi chinensis Sonn.) fruits are very susceptible to pericarp browning which adversely affects consumer acceptability even though the aril portion remains in excellent condition. Litchi arils (litchis) were treated with a solution containing 0–2% (w/v) calcium lactate (CL), 0–0.02% (w/v) 4‐hexyl resorcinol (4‐HR) and 1% potassium sorbate. The pH of solution was adjusted to 4.0 with citric acid. Treated litchis were packed in polystyrene trays, over‐wrapped with polypropylene film, vacuum‐packed (0, 47409.3, 94831.9 Pa) and stored at 4 ± 2 °C. Drip losses, pH, total soluble solids (TSS), sensory attributes and microbiological quality of stored samples were estimated. A four‐factor, three‐level experimental design (D₆ Hokes design) with 19 experiments was chosen. Mathematical models were developed to analyse and predict the effect of CL, 4‐HR, in‐package vacuum and storage time on the responses. TSS, pH and sensory scores decreased significantly (P 0.01), whereas drip losses and microbial count increased significantly (P 0.01) with time. Drip loss was significantly (P 0.1) reduced by addition of CL. 4‐HR prevented browning and changes in colour score during storage were significantly less. Vacuum in packages exerted significant (P 0.01) effect over pH, TSS, sensory and microbiological qualities of minimally processed litchis.     

Effect of fiber types on relevant properties of porous asphalt

The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes, using the tests of draindown, abrasion, volumetric properties, rutting, and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter （G＊/sin δ） of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon MOHR-COULOMB theory, the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore, they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis, cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.     

《石油沥青纸胎油毡》国家标准的修订

《石油沥青纸胎油毡》国家标准进行了第三次修订。本文介绍了修订的理由、修订的内容与依据，并与国内外同类产品标准进行了比较。     

大港渣油掺兑催化油浆氧化沥青的研究

重油催化裂化外甩油浆中富含芳烃，可望在国产原油生产优质道路沥青上发挥作用。对大港环烷基渣油中掺兑一定比例的油浆后氧化改善道路沥青性质的可能性进行了研究，结果表明：渣油掺兑油浆氧化，不仅可以有效改善沥青延度，同时也为油浆的合理利用开辟了一条新途径。     

Studies on jute–asphalt composites

The tensile properties of jute make it a suitable raw material for asphalt overlay (A/O) fabric. In this study, the thermal stability of jute under conditions of asphalt overlaying process was investigated and the compatibility of jute with asphalt was assessed through experimentation on jute–asphalt composites under mechanical and hygral loads. Fourier transform infra red (FTIR) spectroscopic study revealed probable chemical bonding between jute and asphalt. The test for ascertaining the capability of asphalt encasement for protecting jute against biodegradation under enzymatic attack was found positive. A 6‐month hygral treatment, of the jute–asphalt composite, showed significant increase in modulus of the material. The results indicate that although the strength of jute deteriorates by about 10% under asphalt overlaying condition, the overall tensile behavior of jute fabric–asphalt composite material is considerably superior to that of the pure jute fabric, even under biological and extended hygral loading conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

欢喜岭重交通道路沥青SHRP性能研究

应用Superpave沥青胶结料试验动态剪切试验、压力老化试验和弯曲梁流变试验评定欢喜岭重交通道路沥青的抗永久变形、抗低温开裂和抗疲劳开裂性能，确定欢喜岭重交沥青最高和最低路面设计温度及PG等级，表明欢喜岭重交沥青满足我国广阔地域的使用要求。     

A Study of the Compatibility Between Asphalt and SBS

In this article, the compatibilities between different components of a base asphalt and styrene butadiene styrene (SBS) have been analyzed from microscopic structures. Specifically, the asphalt was separated into three components: saturates, aromatics, and resins, by Solvent Recycled Absorption Chromatography Separation Technology (SRACST). The compatibilities between these different components and the polymer were compared with the help of Fluorescence Microscope (FM) with which the existing state of the polymer SBS in these different components could be examined obviously. The modified effects indicated that aromatics could cause SBS swollen and, resins dissolved SBS better than saturates, though both the two components could partially dissolve SBS and the two mixtures presented two immiscible phase systems. In order to further investigate the compatibility between aromatics and SBS, from macroscopic properties, an additive rich in aromatics was added to the SBS/asphalt mixture, and the result was satisfactory.     

改性沥青在道路大修工程中的应用

通过在山西省府西街段SMA改性沥青试验段的施工情况,详细地阐述了沥青在道路大修工程中的应用,提出了改性沥青施工的质量控制措施,以提高沥青路面的温度稳定性及弹性恢复性能,以期实现道路的耐久性等目的。