泡沫夹克管的防水与保温

针对辽河油田应用泡沫夹克管道的情况，从泡沫夹克管的制作和敷设施工直到设计等环节，结合泡沫夹克管防腐保温的机理，并从理论与实践相结合角度出发，提出导致泡沫夹克管腐蚀损坏的最主要原因是管道保温层漏水，进而提出了在设计和施工过程中提高泡沫夹克管质量的措施。     

中低速率语音波形编码

提出了一种波形编码的新方法，阐述了其编码原理。该编码算法简单，恢复的语音质量较好。由于利用了矢量量化技术，所以该编码速率较低。     

Σ-ΔA/D转换技术及仿真

Σ－ΔＡ／Ｄ转换技术近年来颇受重视，因为基于该技术的Ａ／Ｄ转换器能达到很高的分辨率（１６ｂｉｔ以上），并另具一系列优点。本文对Σ－ΔＡ／Ｄ转换器的基本原理，包括过采样（Ｏｖｅｒｓａｍｐｌｉｎｇ），噪声成形（ＮｏｉｓｅＳｈａｐｉｎｇ），以及数字抽取滤波（ＤｉｇｉｔａｌＤｅｃｉｍａｔｉｏｎＦｉｌｔｅｒｉｎｇ）等内容，均作了叙述。作者还对一个２０ｂｉｔΣ－Δ转换器的算法进行了计算机仿真。该转换器采用了高阶ＭＡＳＨ噪声成形技术，而其数字抽取滤波部分则由梳状滤波器与级联的半带滤波器构成。文章中给出了仿真结果。     

A STEP-BASED CAD/CAPP INTEGRATION

ＡＳＴＥＰ－ＢＡＳＥＤＣＡＤＩＣＡＰＰＩＮＴＥＧＲＡＴＩＯＮＺｈｅｎｇＬｉａｎｙｕ；ＤｕＰｅｉＡＳＴＥＰ－ＢＡＳＥＤＣＡＤＩＣＡＰＰＩＮＴＥＧＲＡＴＩＯＮ￥ＺｈｅｎｇＬｉａｎｙｕ；ＤｕＰｅｉＡｂｓｔｒａｃｔＴｈｅｉｎｆｏｒｍａｔｉｏｎｉｎｔｅｇｒａｔ...     

一个面向CAD／CAM的演绎数据库管理系统

演绎数据库管理系统ＤＥＤＢＭＳ是工程数据库管理系统ＥＤＢＭＳ／２中的一个子系统。本文着重介绍其产生式语言用户界面、工作流程及功能特点。ＤＥＤＢＭＳ系统的开发，使ＥＤＢＭＳ／２不仅具有工程数据据管理功能，而且具有数据演绎和知识处理能力，从而成为ＣＡＤ／ＣＡＭ系统集成化和智能化的有力支撑工具。     

计算机集成制造系统（CIMS）国际发展动态

ＣＩＭＳ（计算机集成制造系统）是世界上高技术开发项目之一．ＣＩＭＳ是涉及广泛技术领域的复杂系统，当前的研究课题覆盖了ＣＩＭ中方法学、技术和应用领域的部分内容．本文简要讨论ＣＩＭＳ的国际发展动态．     

PS,LS和煤油体系的界面张力

本文以石油磺酸盐(PS)、木质素磺酸盐(LS)和煤油体系为对象,研究了PS/LS比、盐度、醇、Na_2SiO_3及聚合物对体系界面张力(IFT)的影响,探讨了PS与各组分间的相互作用,结果发现,在一定盐度和混合醇(正丁醇+异丙醇)浓度下,PS/LS>0.3/0.7时,体系可形成中相微乳液,IFT值达1×10~(-3)mN/m左右;LS和聚合物的存在使IFT升高;在表面活性剂驱油体系中,可用廉价的LS部分代替PS。     

Processing and microstructure of non-oxide ceramic fibres

Research and development efforts on high-temperature, oxidation-resistant fibres have increased over the past decade due to the demand for light-weight, stiff and strong composite materials in aerospace applications. Varieties of ‘high-performance’, continuous, non-oxide fibres with low-density, high tensile strength and tensile modulus have been developed either from organic precursors or via chemical vapour deposition for fabrication of ceramic matrix composites. Fibres derived from polymer precursors (e.g. Nicalon, Tyranno, HPZ) are small in diameter (compared to CVD monofilaments) and are ideally suited for ceramic composites. Processing, microstructural stability and mechanical properties of these newly developed SiC and Si₃N₄ base fibres are briefly reviewed in this paper.     

Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.