第四十届国际尖端材料学会年会与展览简介

介绍国外先进材料技术现状与发展趋势，即强调发展新材料技术，低成本生产技术，质量控制技术，重视先进材料应用，两用技术和军转民。     

Accelerated sintering of PtRh/Al2O3 catalysts in an oxygen periodic pulse flow

PtRh catalysts were prepared by coimpregnation, with chlorine-free precursors of a -alumina. They were sintered at 973 K under a continuous flow of O₂ (1% in Ar or air) or of a flow of Ar into which pulses of O₂ were injected periodically. Under the latter conditions the sintering was significantly accelerated, particularly for a certain value of the period of O₂ pulses.     

基于JSP的移动开发技术论坛的设计与实现

本文讨论基于B/S模式的一种JSP论坛的设计与实现。完成的功能模块包括用户注册,浏览板块,发帖,回帖等,管理员编辑,删除等管理帖子功能,管理管理员用户功能等。     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。     

混炼胶表征和橡胶产品计算机建模以优化汽车工业用橡胶产品

本文介绍了建立准静态橡胶制品模型所必需的一些与橡胶有关的试验。也介绍了后定位器制造、复合软管扣压和电气连接器组装等生产过程,计算机预测数据均在物理样机测试结果的5%以内。     

Analysis of the Structure and Biosynthesis of the Lipopolysaccharide Core Oligosaccharide of Pseudomonas syringae pv. tomato DC3000

Lipopolysaccharide (LPS), the major component of the outer membrane of Gram-negative bacteria, is important for bacterial viability in general and host–pathogen interactions in particular. Negative charges at its core oligosaccharide (core-OS) contribute to membrane integrity through bridging interactions with divalent cations. The molecular structure and synthesis of the core-OS have been resolved in various bacteria including the mammalian pathogen Pseudomonas aeruginosa. A few core-OS structures of plant-associated Pseudomonas strains have been solved to date, but the genetic components of the underlying biosynthesis remained unclear. We conducted a comparative genome analysis of the core-OS gene cluster in Pseudomonas syringae pv. tomato (Pst) DC3000, a widely used model pathogen in plant–microbe interactions, within the P. syringae species complex and to other plant-associated Pseudomonas strains. Our results suggest a genetic and structural conservation of the inner core-OS but variation in outer core-OS composition within the P. syringae species complex. Structural analysis of the core-OS of Pst DC3000 shows an uncommonly high phosphorylation and presence of an O-acetylated sugar. Finally, we combined the results of our genomic survey with available structure information to estimate the core-OS composition of other Pseudomonas species.     

硫化物改质对20MnCr5齿轮钢夹杂物和切削性能的影响

 齿轮钢广泛应用于汽车、机械等传动系统,易切削化是提高齿轮加工效率、降低制造成本的主要途径之一。提高钢中硫元素含量是改善齿轮钢切削性能的有效方式,然而过多的硫元素在轧制时会形成条带状MnS,增大钢的各向异性,因此需要对硫化物进行改制处理。分别采用Ca处理和Mg处理两种方式对20MnCr5齿轮钢进行硫化物改质,通过对力学性能、组织形态、夹杂物分布以及切削性能等表征,对比分析不同改制方式对材料的影响。结果表明,Ca处理和Mg处理后试验钢的强度和塑性保持一致,而Mg处理试样的晶粒尺寸较小,因而韧性较高。Ca处理试验钢中MnS夹杂物数量较多,长条状夹杂物比例相对较高;而采用Mg处理可以有效降低钢中夹杂物的数量,夹杂物平均尺寸有所增大,同时小长径比夹杂物数量增多,但是复合氧化物型夹杂物的数量也有所增加。在240~280 m/min条件下进行了干切削试验,结果表明两种试验钢均出现前刀面磨损、后刀面磨损和边界磨损,其中Ca处理试样的刀具磨损较为严重,同时在较高切削速度下出现了积屑瘤和崩角现象,而Mg处理试样则具有更长的刀具使用寿命,对切削速度的敏感性也较低。分析可知,Mg处理后钢中存在较多的大尺寸球状硫化物夹杂物,提高了应力集中效应,更有利于改善切削性能,因而改制效果更好。     

机械活化-湿化学合成LiMn2O4的组成、结构与表征

以MnO2和LiOH·H2O为原料,采用机械活化与湿化学集成的方法,在水溶液中直接合成了结晶态的尖晶石锂锰氧化物.当锂含量介于3.78%～4.35%之间时,所得锂锰氧化物为纳米级球形粉末,以尖晶石结构为主,含极少量的Mn3O4杂相;在300～800℃温度范围内热处理后,Mn3O4杂相消失,尖晶石结构更趋完善.所合成的含锂5.80%的高锂样品则以LiMnO2层状结构为主,含少量Mn3O4杂相,其SEM形貌为片状;在300～700℃下热处理8 h后,层状LiMnO2转变成尖晶石LiMn2O4,Mn3O4杂相峰明显减弱并随热处理温度的升高而消失;当温度升高至700～800℃时,开始出现缺锂的Li1-xMn2O4相.结果表明:该法制备锂锰氧化物可实现锂、锰、氧在原子级水平的均匀混合,所得产物的热稳定性能良好,其化学计量组成与结构易于调整和控制.     

Use of electron microscopy on microstructure characterization of high chromium cast irons

The physical metallurgy underlying the development of cast microstructures in abrasion resistant high chromium cast irons, and their structural modification by thermal treatments is relatively complex. Structural characterisation via electron microscopy therefore has a key role to play in furthering our understanding of the phase transformations that control the microstructures and hence the service performances of these irons as wear parts. This paper shows how both scanning and especially transmission electron microscopy can provide valuable information on the nature of eutectic and secondary carbides and on the matrix structures in these irons. Particular attention is given to current characterisation research on conventionally cast 30%Cr irons that are used for applications involving corrosive wear e.g. slurry pumps and on a semi-solid cast 27%Cr iron that has a potential for applications in industry.     

玻璃包覆纯铜微丝的制备与表征

采用熔融纺丝法制备了玻璃包覆纯铜微丝,对微丝进行了组织观察以及尺寸和缺陷表征,提出了不同冷却条件下的纯铜芯丝凝固过程模型,讨论了制备过程中存在的问题并提出了相应的解决方案.结果表明:在空气中自然冷却凝固的纯铜芯丝内部组织为细等轴晶,加冷却水快速冷却凝固制备的纯铜芯丝内部的晶粒沿着微丝长度方向呈竹节状整齐排列;当微丝外径为45μm、芯丝直径为25 μm时,外径尺寸波动在6%以内,芯丝直径误差小于4%;当原料质量存在问题或制备过程中拉丝速度、冷却速度等工艺参数匹配不合理时,易导致芯丝表面存在凹坑和凹槽等缺陷.