3,3’,4,4’-四氨基二苯醚的合成与表征

以4,4’-二氨基二苯醚(4,4’-DADPE)为原料,经乙酰化、硝化、酸解、还原、中和五步反应合成3,3’,4,4’-四氨基二苯醚(TADE),总收率为39.5%,并用1HNMR、FT-IR以及熔点测试技术对其进行了表征。     

冬凌草硒多糖的制备、表征及抗氧化活性分析

本研究以济源冬凌草多糖为原料，选用化学合成方法对多糖进行结构修饰。采用UV、FT-IR、SEM、TGA、HPLC等方法对冬凌草多糖以及硒多糖结构特征进行了表征；通过DPPH（1,1-二苯基-2-三硝基苯肼）自由基法、羟自由基法等4种方法对其抗氧化活性进行了探究。结果：制备的硒多糖中硒质量分数为1.35 mg/g。硒化修饰后，冬凌草多糖的基本骨架得到保留，单糖种类未发生改变，但其分解温度降低、稳定性下降，多糖形貌也发生明显变化，球状与条状形貌增多，片状形貌减少。此外，在体外抗氧化性实验中，当硒多糖质量浓度为1.6mg/mL时，对DPPH自由基、ABTS自由基、羟自由基清除率分别为68.68%、86.69%、45.12%，均强于冬凌草多糖。     

纳米氧化锌的制备与表征

对传统的直接沉淀法进行了改进 ,对反应温度、搅拌速度、投料方式及洗涤条件等多种因素对产物纳米氧化锌的影响进行了研究。结果表明 ,改进的直接沉淀法制备纳米氧化锌具有工艺简单、成本较低 ,能够得到六方晶系、球形 ,粒径约为 15～ 2 5nm的纳米氧化锌     

N-杂环异海松酰基磺酰胺的制备及其抗肿瘤活性

为了寻求以天然资源为原料的抗肿瘤药物,以异海松酸为原料,设计并合成了6个N-[4-(异海松酰胺基)苯基]-杂环磺酰胺类化合物(Ⅴa～Ⅴf),采用FTIR、1HNMR、13CNMR和MS对其结构进行了表征.生物活性测试结果表明,部分化合物对人体宫颈癌细胞(Hela)、乳腺癌细胞(MDA-MB-231)、前列腺癌细胞(PC-3)和肝癌细胞(Hep G-2)具有良好的抑制活性.在浓度为100μmol/L时,N-[4-(异海松酰胺基)苯基]-2-氯-5-吡啶磺酰胺(Ⅴd)和N-[4-(异海松酰胺基)苯基]-3-溴-2-氯吡啶-5-磺酰胺(Ⅴe)对4种人体肿瘤细胞都具有良好的抑制活性,对上述人体肿瘤细胞的增殖抑制率均大于95％和94％;N-[4-(异海松酰胺基)苯基]-3-氯喹啉磺酰胺(Ⅴc)对上述肿瘤细胞的增殖具有较好的抑制活性.化合物Ⅴd和Ⅴe对4种肿瘤细胞的半抑制浓度(IC50)均低于临床上应用较广的抗癌剂5-氟尿嘧啶(5-FU),其抑制活性优于阳性对照,且对人体正常细胞——人脐静脉内皮细胞(HUVEC)的毒性低于对肿瘤细胞的毒性,有一定的临床应用前景.     

Characterization of the reactivity of limestones with SO2 in a fluidized bed reactor

The reaction between SO₂ and calcined limestone particles has been studied in a fluidized bed combustor. Measurements of sorbent reactivity with SO₂ were made for small batches of limestone injected into the combustor. Simultaneous continuous combustion of bituminous coal provided conditions like those of a boiler for study of the sulphation reaction. A semi-empirical rate model of the CaO-SO₂ reaction has been developed. External mass transfer of SO₂, diffusion within the particles and chemical reaction are taken into account. The limestone reactivity with SO₂ is characterized by two parameters which are dependent on the temperature and sorbent particle size. A model for predicting the limestone requirements in a fluidized bed boiler has been developed. Parameters from the batch experiments are included. The predictions for sulfur retention agree with the experimental results. In addition, effects of operating conditions (gas velocity, recycle, limestone particle size) on the retention of SO₂ were simulated using the model.     

电泳沉积法γ-Al2O3微孔膜的制备与表征

采用电泳沉积法制备γ－Al2O3微孔膜，考察了干燥及烧成制度对膜形成的影响，并用IR，XRD，SEM，N2吸附－脱附等测试手段对γ－Al2O3微孔膜进行了表征。结果表明：采用电泳沉积法可成功地制备均匀的γ－Al2O3保护膜；实验中采用室温慢速干燥法，制得了完整的凝胶膜，经过焙烧可获得与基片结合良好的γ－Al2O3多孔膜，在焙烧过程中，γ－AlOOH发生如下的晶型转变：γ－AlOOH→345℃γ－Al2O3，并且随着焙烧温度的升高，γ－Al2O3膜的结晶性得到改善。此外，γ－Al2O3膜的断面结构较疏松，膜厚度大面均匀：一次成膜厚度达十几μm，γ－Al2O3微孔膜的孔径尺寸为纳米级。     

异佛尔酮二异氰酸酯三聚体的合成

合成了3－异氰酸酯基亚甲基－3，3，5－三甲基环己基二异氰酸酯（IPDI）三聚体，对合成中催化剂，反应温度、反应时间等进行了探讨，并用红外光谱进行了表征。结果表明，采用醋酸钾化催化剂，在50－90℃下反应，再经脱催化剂处理，可制得IPDI三聚体。     

用二氧化硅表面改性纳米二氧化钛的制备及表征

针对二氧化钛(TiO2纳米颗粒在水性涂料中极易团聚、分散性差的问题,以提高TiO2分散稳定性为目的,用并流中和法,以锐钛矿型纳米TiO2粉体为载体,硅酸钠(Na2SiO3)为包覆剂,用硫酸(H2SO4)调节pH值,成功地在纳米TiO2表面包覆致密的SiO2膜.借助Fourier变换红外光谱(Fourier transform infrared spectroscopy,FTIR)、X射线衍射技术(X-ray diffraction,XRD)和X射线能量散射谱(X-ray energy dispersive spectroscopy,EDS),表征样品的键合情况、相态结构、表面的化学成分,同时测定包覆改性前后的纳米TiO2比表面积和酸溶性.FTIR和EDS结果表明:该包覆方法可行,氧化硅(SiO2)以化学键合的方式沉积在纳米TiO2表面,在包覆层和纳米TiO2颗粒之间的界面上形成了Ti-O-Si键.酸溶实验分析和XRD结果证实:在TiO2纳米颗粒表面包覆了一层致密SiO2膜.比表面测定的结果显示:改性后TiO2的比表面积随质量分数m(SiO2):m(TiO2)增加而减小.     

Catalytic hydrogenation of nitrile rubber using palladium and ruthenium complexes

The catalytic hydrogenation of acrylonitrile‐butadiene copolymer (nitrile rubber, NBR) using Pd(OAc)₂ or RuCl₂(PPh₃)₃ catalysts has been investigated in order to produce a totally saturated nitrile rubber. The hydrogenation of NBR is effective with both catalysts and achieved total conversion under the appropriate reaction conditions. In the case of palladium the effects of reaction parameters such as reaction temperature, pressure, time, catalyst concentration, and NBR concentration have been investigated. Even though both ruthenium‐ and palladium‐based catalysts are effective in the production of HNBR, the former requires harsh reaction conditions and has the drawback of gel formation under high conversion, motivating the migration to RuCl₂ (PPh₃)₃ as an alternative catalyst. The degree of hydrogenation was determined by IR and NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Micropore characterization using the Dubinin-Astakhov equation to analyze high pressure CO2 (273 K) adsorption data

The characterization of the pore structure of microporous materials is of interest because of the usefulness of these materials in many applications. Of these, the characterization of carbon adsorbents is particularly problematic because of the presence of small pores with size on the order of small molecules (micropores) along with a wide distribution of pore sizes, and their non-crystalline structure. In this paper, we present results obtained using the Dubinin-Astakhov equation to analyze data from high pressure CO₂ adsorption at 273 K to characterize two sets of microporous carbons. Our results support the conclusions of previous workers that the Dubinin-Astakhov (DA) equation is able to linearize adsorption data that gives rise to curved Dubinin-Radushkevich plots. However, when applied over different ranges of relative pressure on the adsorption isotherm, the Dubinin-Astakhov plots result in different values of micropore volume and characteristic adsorption potential. Furthermore, DA analysis of CO₂ (273 K) adsorption data over a wide range of pressures (10^–3–22000 Tort), gives results different from DA analysis of CO₂ (273 K) isotherms measured at low pressures only (10^–3–830 Tort). It would appear desirable to apply the DA equation to data that reflects the entire range of micropore filling on the adsorption isotherm, as opposed to data over a limited relative pressure range. For CO₂ adsorption at 273 K, this would necessitate adsorption studies at high pressures, to about 28 atm. Micropore volumes obtained in this manner, agreed with the total pore volumes determined by nitrogen (77 K) adsorption for all the activated carbons studied.