A new calculation method of feedback controller gain for bilinear paper-making process with disturbance

This paper presents a new method to calculate the feedback control gain for a class of multivariable bilinear system, and also applied this method on the control of two sections of paper-making process with disturbance. The robust H∞ control problem is to design a state feedback controller such that the robust stability and a prescribed H∞ performance of the resulting closed-loop system are ensured. The controller turns out to be robust with respect to the disturbance in the plant. Utilizing the Schur complement and some variable transformations, the stability conditions of the multivariable bilinear systems are formulated in terms of Lyapunov function via the form of linear matrix inequality (LMI). The gain of controller will be calculated via LMI. Finally, the application examples of a headbox section and a dryer section of paper-making process are used to illustrate the applicability of the proposed method.     

粉体高浓度输送相图

根据以固体质量流速和固体装入量为参数的Zenz相图（即压降与表观气速的关系图）和洪江等人的模型[6]，对粗聚氯乙烯和细PVC颗粒的水平气力输送进行了合理的预测     

Cr^3＋=Al2（WO4）3晶体生长助熔剂体系的研究

本文用DTA和XRD法研究了Na_2O-Al_2O_3-WO_3三元系中的Al_2(WO_4)_3-Na_2WO_4截面的相平衡关系。在这截面中发现一新化合物AlNa_3(WO_4)_2。以45mol％Na_2WO_4为助熔剂生长了Cr~(3+):Al_2(WO_4)_3晶体。     

新型动磁式直线振荡执行器的动子位移自传感

针对一种新型无内定子动磁式直线振荡执行器,在建立其机电系统数学模型的基础上,提出一种基于全维状态观测器的动子位移自传感算法。通过对执行器输入电压和输出电流信号的处理和计算来估算动子位移。仿真和实验结果均表明:在变压变频控制方式下,该算法能实现不同电气驱动频率下的动子位移自传感;采用该算法进行行程估算的绝对误差最大值为0.32 mm,相对误差最大值为2.6%。此算法可以满足直线压缩机和直线泵类负载的变行程控制要求。     

Phase Diagram for Liquid Crystalline Polymer/ Polycarbonate Blends

A novel mechanism to form binary polymer blends is through phase separation by spinodal decomposition in the unstable region of the phase diagram. The present work investigates the effects of thermally‐induced phase separation by spinodal decomposition on the morphology development of liquid crystalline polymer/polycarbonate blends. Moreover, a thermodynamic binary phase diagram is obtained using a twin‐screw extruder at various processing melt temperatures. Differential scanning calorimetry and scanning electron microscopy were used to study the miscibility of the blends and the resulting morphology. A thermodynamic binary phase diagram exhibiting a lower critical solution temperature was obtained. The droplet size distribution of the blend was also obtained and discussed in light of the Cahn‐Hilliard theory.     

Characterization of dilute and dense phase vertical upflow gas-solid transport based on average concentration and velocity data

Dilute, ‘dense phase 1’, and possibly a third regime-‘dense phase 2’, were observed in a vertical 0.02 m diameter pneumatic conveyor using 210 μm sand particles. The transitions were marked by the alterations in the trend of the measured average solids hold-up while varying the solids mass flowrate at constant air velocity. Hydrodynamic characteristics together with the transition criteria for the various transport modes were established. A novel regime diagram based on average gas velocities and solids mass flowrates was developed to identify the operating conditions for these regimes, as well as the limiting solids carrying capacities of the present conveyor. A probable cause of the dilute to dense phase transition is speculated upon.     

Viscoelastic Behavior, Thermodynamic Compatibility, and Phase Equilibria in Block Copolymer-Based Pressure-Sensitive Adhesives

The viscoelastic behavior, thermodynamic compatibility, and phase equilibria in block copolymer-based pressure-sensitive adhesives were investigated. The block copolymers investigated were: (1) polystyrene-block-polybutadiene-block-polystyrene (SBS) copolymer (KRATON® D-1102, Shell Development Company) and (2) polystyrene-block-polyisoprene-block-polystyrene (SIS) copolymer (KRATON® D-1107, Shell Development Company). The tackifying resins investigated were: (1) WINGTACK® 86 (Goodyear Tire & Rubber Company) and (2) PICCOTAC® 95BHT (Hercules Inc.). Samples of various compositions were prepared by a solution-casting method with toluene as solvent. Measurements of dynamic storage modulus (G'), dynamic loss modulus (G'), and loss tangent (tan δ) were taken, using a Rheometrics Mechanical Spectrometer. It was found that: (1) both WINGTACK 86 and PICCOTAC 95BHT were equally effective in decreasing the plateau modulus (G^O_N), and increasing the glass transition temperature (T_g) of the polyisoprene midblock of KRATON 1107; and (2) WINGTACK 86 was very effective in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102 (perhaps to SBS block copolymers in general) is explained by the values of the interaction parameter for WINGTACK 86 and KRATON 1102, and for PICCOTAC 95BHT and KRATON 1102. The interaction parameter was determined, using the piezoelectric quartz sorption method. Phase diagrams were constructed for the four block copolymer/tackifying resin systems investigated, using information obtained from both dynamic viscoelastic measurements and optical microscopy. It was found that when mixed with KRATON 1102, PICCOTAC 95BHT formed separate domains whereas WINGTACK 86 did not over the range of concentrations and temperatures investigated. This confirms the evidence obtained from two other independent experimental techniques, namely, dynamic viscoelastic measurements and the piezo-electric sorption method. We have concluded from the present study that PICCOTAC 95BHT is not as an effective tackifying resin as WINGTACK 86, when each is mixed with KRATON 1102. It is pointed out further that information on the order-disorder transition temperature T_r, which was determined from a rheological technique proposed by us, is valuable in determining optimal processing conditions for block copolymer-based pressure-sensitive adhesives.     

反相微乳液法制备陶瓷彩喷墨水(Ⅰ)

系统地研究了Span80-Tween60/助乳化剂/油/FeCl3反相微乳液体系。通过正交实验,进行方差分析,得出最佳反相微乳液体系。通过均匀实验和全面实验,绘制出体系的拟三元相图,并由相图得出体系的最佳比例。绘制出最大溶水量与温度的曲线,从而确定最佳乳化温度。在最佳温度、最佳比例下,配制出两种墨水,并测定了墨水的表面张力、粘度、电导率和稳定性等性能。     

助乳化剂对化妆品乳液稳定性和液晶性的影响

以硬脂酸蔗糖酯和失水山梨醇硬脂酸酯的复配物（SSE）为主乳化剂，十六／十八醇及甘油为助乳化剂制备含液晶乳液化妆品。通过观察乳液的温度稳定性和液晶性，用三元相图研究助乳化剂含量对此乳液体系液区的影响。实验条件下，用该乳化剂体系可获得较好的液晶化妆品乳液，总之，较高的助乳化剂量有利于乳液的温度稳定性和液晶性，但助乳化剂量较低时经合理配方也能获得稳定的液晶乳液，其中含3％高碳醇和5％甘油的乳液稳定性及液晶性均较好，5％高碳醇和3％甘油的助乳化剂体系不宜采用。     

开关柜智能监控装置的设计与实现

文中的开关柜智能监控装置是针对电力开关柜开发设计的一种新型的多功能智能化模拟动态指示装置。该方案以ARM处理器NUC950为控制核心,它集一次回路模拟图、断路器状态、手车位置、接地刀闸位置、弹簧储能状态、隔离开关状态、高压带电显示及闭锁、自动(手动)加热除湿控制、加热器故障报警、超温报警指示、语音防误提示、网络通信等多功能于一体,提高了开关柜状态监测和控制的集成度和智能化。