提高电动车用铅酸蓄电池循环寿命的探讨

简要介绍了影响小型电动车用铅酸蓄电池循环寿命的主要因素,探讨了提高电池深循环性能延长使用寿命采取的主要技术措施,如板栅合金的组合、和膏、固化工艺参数的控制,负极有机添加剂的选择以及正负极板的配组方式等,通过改进,取得了较为满意的效果.     

ASIC设计中的静态时序分析技术

随着工艺线宽的减小,时序问题开始主导集成电路设计。为了解决全芯片的互连延时,需要全芯片分析和优化。PrimeTime 是Synopsys 公司全芯片和门级静态时序分析工具。PrimeTime 用来分析大型同步数字专用集成电路。静态时序分析是一种彻底的分析、调试、验证设计的方法。     

基于AMESim的先导式减压器性能仿真分析

选择先导式减压器设计方案,进行静态特性计算。使用工程系统仿真高级建模环境（Advanced Modeling Environment for performing Simulation of engineering systems, AMESim）对静态及动态特性进行仿真分析。仿真结果表明,不同结构要素需合理设置,以保证减压器性能满足要求。     

全文检索系统中动态索引技术的研究

全文检索是一种非常有效的信息检索技术,本文通过分析全文检索系统中静态索引技术的优缺点,以及影响动态性能的因素,提出一种基于互关联后继树模型的动态索引技术,该技术在不影响查询效率等性能的情况下,很好地解决了索引的更新问题,提高了索引的动态性能。     

气动-机械微安保结构设计与性能测试

针对新型火工品的微型化、可靠性要求,设计了一种气体驱动的机械微安保结构,对其核心的机械安保层进行了静力学仿真,确定微弹簧最佳加工材料为65Mn弹簧钢,线宽为0.2mm时微弹簧解除保险所需的理论压强为4.3MPa。通过微加工技术,制作了原理样机,并测试其性能。结果表明样机可以成功解除保险,并实现安保功能。     

等离子体处理对氧化铟锡(ITO)润湿性及性能参数的影响

在预处理室中对ITO薄膜进行等离子体处理,研究分别在氧气、氮气、氩气及空气四种工作气体下,等离子体处理压强和处理时间对薄膜的润湿性及性能参数的影响。接触角测试仪表征表明,等离子体处理时间越长、处理压强越大,静态H₂O接触角越小,其润湿性越高。分光光度计测试结果表明,经等离子体处理,ITO薄膜透过率较未处理均有所下降。四种工作气体下,等离子体处理压强越大对透过率的影响越小,但随着处理时间的增长影响会增大;相较其他工作气体,氧气等离子体处理整体变化最小。四点探针表征表明,处理后的ITO薄膜方块电阻无明显变化,这是由于等离子体处理只对ITO薄膜表面进行改性,没有改变内部性质。利用霍尔效应测量载流子浓度,没有发现明显变化,与方块电阻不变结论一致。     

索网穹顶静动力分析及施工模拟

索网穹顶系国内首次采用新型结构形式,体系较为复杂,静动力分析及施工过程动态模拟显得特别重要。基于非线性有限元分析方法,本文对结构主次索网的协同工作性能进行了分析,并对动力性能做了深入探讨。鉴于索网穹顶结构施工成型的难点,运用ANSYS软件跟踪模拟分析施工过程中结构的响应,对类似结构的工程施工设计具有一定的参考价值。     

7420重负荷开式齿轮润滑脂在圆筒式混料机上的应用

7420重负荷开式齿轮润滑脂解决了圆筒式混料机的齿轮磨损、喷嘴堵塞和环境污染问题,同时可节约50％的润滑费用。2006年4月,天津钢铁集团有限公司炼铁厂360m。烧结机第二烧结作业区投产,其中沈阳冶金设。     

Bending of Delaminated Composite Conoidal Shells under Uniformly Distributed Load

Conoidal shells are very popular roofing units owing to their aesthetic elegance and stiffness. Many parts of the globe, which were earlier assumed to be seismologically stable, are now being considered as earthquake prone. Hence the necessity to build light structures using composites has become very important. In this paper an eight-noded isoparametric shell element is applied for analyzing the bending behavior of delaminated composite conoidal shells under a uniformly distributed load with different practical boundary conditions. To ensure compatibility of deformation and equilibrium of forces and moments at the delamination crack front, a multipoint constraint algorithm is incorporated, which leads to an unsymmetrical stiffness matrix. This formulation is validated through the solution of benchmark problems. Lamination, curvature, and extent of delamination area are varied to compare the performances of delaminated conoidal shells against those with no damage. The results are carefully observed, and a set of conclusions is presented at the end of the paper.     

Underfoot accidents

The events leading to injury and the contributory factors associated with each event were investigated in a series of 100 patients treated in an A&E department, using a new programmable accident model for the analysis and storage of data.

The focal point of the interview with each casualty was identification of the first unforeseen event in the sequence leading to injury, together with the activities and movements at the time of the first event and any objects associated with it.

In 37 cases out of 100, the first unforeseen event took place between the feet and their point of support. For example, the foot slipped unexpectedly, a step was missed or a ladder fell.

As a result of these underfoot accidents, sprains of the joints of the lower limb were frequent injuries but second injuries occurred more commonly than after other types of first unforeseen events. Underfoot accidents occurred in 10 out of the 38 injuries at work and in 27 of the 62 which took place at home, at leisure, while shopping, etc.