Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

化学镀Ni—P镀层的X射线衍射研究

根据X射线衍射分析结果,对化学镀高P(含P>11wt％或19at％)Ni-P镀层加热时效时,镀层成分和加热温度对结构转变的影响作了研究,结果表明,高P共晶、过共晶(含P>11wt％或19at％)合金的结构转变有如下特征:(1)相同加热时效条件下,Ni-P合金的结构转变与成分有密切关系:(2)对同一成分的过共晶合金,Ni-P合金的结构转变与时效温度密切相关;(3)过共晶合金在290～360℃温度范围内时效处理,出现Ni_xP_y介稳相,X射线衍射分析认为Ni_xP_y为Ni_(12)P_5。     

石匣小流域坡地水土流失监测系统的建立及应用

以石匣小流域为坡地水土流失监测试点,以遥感及地理信息系统技术为手段,以坡地径流小区定位观测为依据,建立石匣小流域坡地水土流失监测系统,定位、定性、定量监测各种坡地类型的水土流失量、污染物流失量,为水土流失监测预报提供数据,为全市山区水土流失监测预报工作提供经验及方法,为制定水土流失防治方针政策及水土流失生态环境建设提供依据.     

有关H－Ⅱ运载火箭的动力学课题研究

重点介绍有关Ｈ—Ⅱ运载火箭（以下简称Ｈ—Ⅱ）的一些动力学课题的研究状况。其中，重要的动力学课题有全箭振动、ＰＯＧＯ、防液体晃动、分离动力学试验、动力学环境试验等。针对这些动力学课题，日本有关部门已研究多年，既作了充分的地面试验，又进行了有效的工程应用研究，最终保证了Ｈ—Ⅱ的首次飞行成功。     

A calibration method for the energy-integrating function in photovoltaic system monitoring

Solar radiation has an irregularly varying factor due to a basic day and night cycle and climatic conditions. For such conditions a data sampling interval is important to ensure the accuracy of energy monitoring in a photovoltaic system. While treating a system monitoring equipment as a black box. the author has developed the method of calibrating an energy-integrating function. At first for various input waveforms, the relationship between sampling intervals and quasi-integration outputs have been examined by trapezoidal rule. In the numerical simulation the phases of the sampling clock also are considered Then it is concluded that a sampling interval can be inspected through outside observation only by using a rectangular single pulse. By applying the pulse to the energy-integrating process, two kinds of integrated outputs can be obtained for different sampling phases. The calculated difference between both outputs can uniquely give the sampling interval being inspected. Conditions to ensure measuring accuracy are discussed and the validity of this method has been demonstrated experimentally. Practical calibrating procedures also are proposed for the integrating function of PV system monitoring.     

Forest harvesting in rural properties: Risks and worsening to the worker’s health under the ergonomics approach

Through an ergonomic approach, this study aimed to evaluate whether workers involved in forest harvesting activities in rural properties are subject to the development of work-related diseases, as well as their consequences. A cross-sectional study with 267 forest workers in rural properties in the Brazilian Central region was used. The following evaluations were performed for each of the activities (felling, delimbing, tracing, manual extraction and manual loading): physical workload evaluation; biomechanical evaluation; risk of repetitive strain injuries/work-related musculoskeletal disorders; environmental noise and vibration factors, where relevant, and thermal overload through the Wetbulb Globe Temperature index. The results showed that in general the physical workload was very high, exceeding the cardiovascular load limits and adding to the need for work reorganization. All activities exposed workers to serious and imminent risks of developing injuries to the spine and lower limbs. Likewise, in general the risk of the appearance of RSI/WMSDs was very high for all activities evaluated. Such results are due to the combination of organizational work factors and factors of the work environment such as exposure to bad weather, uneven terrain, lifting and handling loads above tolerable limits, excessive noise and thermal overload. All of this allows to conclude that ergonomic risks and workers’ health hazards in forest harvesting in rural properties are latent and very worrying, and that these workers are exposed to a form of labor exploitation that invariably leads to physical and emotional exhaustion and therefore to their decreased labor capacity and useful working life.     

AlF3贮仓料位计在线监控系统开发与应用

针对铝电解原材料中AlF3与Al2O3自动配料不准和难于观察及控制的现象，我厂开发应用了AlF3贮仓料位计，并与微机网络相连，实现了远程测量与在线监控，使AlF3配料更准确更均匀，电解质分子比更稳定，电解槽生产低耗高效。     

高职院校特色专业监控体系建设研究

近年来,高职院校都比较注重特色专业的建设。其中,特色专业建设的监控体系也受到了高职院校的重视,并取得了一定的效果,同时,也给其他院校提供了有价值的参考和借鉴。但由于在认识水平、管理水平和教学水平等方面仍有一些问题,导致在监控过程和措施实施方面还存在许多疏漏,有待完善。     

一种高效的网格资源监测算法ACTC的改进算法

资源监控是网格计算的关键组成部分。资源监控算法既要保证网格系统中资源信息高保真度又要考虑资源信息在网络传输中的负担最低。ACTC算法就是为实现以上目的而被提出,但是算法中对资源信息更新量的动态门槛值(d_threshold)计算方式不合理,有可能导致算法演变成低级的单纯依靠时间敏感机制(TSM)来发送资源更新通知,并且算法中遗漏了一些极端情况的考虑。提出了新的d_threshold计算公式和限制条件,进行性能改进和完善,并对改进前后两算法进行实验对比。实验表明,改进后算法提高了资源信息准确性,并使监控系统     

Study on early warning index of spatial deformation for high concrete dam

Owing to the deficiency in early warning for high concrete dam,a formula was established to characterize the deformation behavior of high concrete dam as a whole.The early warning index of spatial deformation was calculated by low probability principle on the basis of the deformation entropy formula proposed.The steps were as follows.Firstly,the probability method was utilized to define the degree of order and degree of chaos for each survey point.Secondly,the weight distribution among the survey points was...