基于GH-PKC体制的盲签名方案

GH-PKC是一种新的基于GF(q)上三级线性反馈移位寄存器序列的公钥密码体制。其安全性基于有限域GF(q3)上的离散对数困难问题,但运算却在有限域GF(q)中进行。文中给出了一种新的基于GH-PKC的类ELGamal数字签名算法,并在此基础上构建了基于GH-PKC的盲签名方案,其安全性等价于解GF(q3)上离散对数困难问题,但是传输的数据量只有传统方案的1/3。     

不规则网格上的曲面设计方法

提出一种在不规则网格上构造曲面的方法.其基本思想是,通过均匀双三次B样条基函数的分解和子基函数的分类,将B样条曲面方法推广到任意四边形网格.给定一个任意四边形控制网格,首先对每个控制点构造一个基函数;所有控制点加权组合形成整体曲面.构造的曲面是分片双三次有理参数多项式曲面.此方法可以看成是均匀B样条曲面构造方法的扩展,如果控制网格是规则四边形网格,那么构造得到的曲面与均匀双三次B样条曲面是一致的.最后,实例证明此方法能够有效地构造曲面.     

均匀二重混合双曲多项式B样条曲线

为扩展B样条曲线,提出1种均匀二重混合双曲多项式B样条曲线. 该样条曲线在span{sinh t,cosh t,tsinh t,tcosh t,1,t,…,tk-6,tk-5}空间上均匀产生,其中k是大于等于5的整数. 证明k阶二重混合双曲多项式B样条基的性质和二重混合双曲多项式B样条曲线的性质. 二重混合双曲多项式B样条曲线精确地包含双曲多项式B样条曲线. 给出这种新样条曲线的细分公式并证明其有变差缩减性质和细分控制多边形逼近性质. 该性质使得通过递归细分得到曲线成为可能.     

基于曲线拟合的多项式相位信号参数估计

研究了多项式相位信号的参数估计问题.针对在分析高阶多项式相位信号时,维格纳-威利分布的交叉项使得时频分布图变得难以解释的问题,采用伪雏格纳-威利变换减少交叉项,并且从伪维格纳-威利分布提取出多项式相位信号的瞬时频率曲线,利用曲线拟合的方法拟合瞬时频率曲线,从而实现了多项式相位信号参数估计.对比了最小二乘曲线拟合和切比雪夫曲线拟合用于多项式相位信号参数估计的不同.最后通过仿真验证了曲线拟合用于多项式相位参数估计的有效性.     

基于小波分析的亚像素配准算法

在像素级配准的基础上,通过对多项式细分算法的改进,提出了一种基于小波分析的亚像素配准算法,并对配准算法的精度进行了分析研究.仿真结果表明,该算法效果良好,达到亚像素级精度.     

散乱数据点多项式插值光顺曲面的构造

为了得到光顺的多项式插值曲面,首先把空间散乱数据点划分为三角形网格,在每个给定数据点处构造C^1连续的分片二次多项式曲面片,针对各数据点的邻接点个数不同,分别利用弯折能量和拉伸能量建立目标函数,极小化目标函数确定插值曲面的未知量,在保持原有的形状特征的同时构造光顺的分片插值曲面,最后用实例说明了文中方法的有效性．     

Algorithms and complexity analysis for some flow problems

Several network-flow problems with additional constraints are considered. They are all special cases of the linear-programming problem and are shown to be -complete. It is shown that the existence of a strongly polynomial-time algorithm for any of these problems implies the existence of such an algorithm for the general linear-programming problem. On the positive side, strongly polynomial algorithms for some parametric flow problems are given, when the number of parameters is fixed. These algorithms are applicable to constrained flow problems when the number of additional constraints is fixed.Work on the paper was done while at Stanford University and IBM Almaden Research Center. This research was partially supported by NSF PYI Grant CCR-8858097.     

基于 IAS 精确估计的太阳轮齿面剥落检测方法研究

瞬时角速度(instantaneous angular speed, IAS)信号的估计精度易受编码器自身误差影响,影响其故障检测结果。针对上述问题提出了一种局部多项式微分估计方法对IAS信号进行估计。首先通过局部多项式微分抑制编码器细分误差产生的锯齿状噪声和估计误差导致的信号不连续问题,实现了IAS信号的高精度获取,然后使用精确估计的IAS信号通过局部同步拟合技术提取太阳轮故障特征。通过实验和仿真说明,本文提出的局部多项式微分估计能较好地抑制编码器误差导致的IAS信号噪声,提高IAS信号的信号比,结合局部同步拟合能够有效地提取太阳轮齿面剥落故障特征。     

Analytical investigation and parametric study of lateral impact behavior of pressurized pipelines and influence of internal pressure

This article provides a combined computational and analytical study to investigate the lateral impact behavior of pressurized pipelines and inspect all the parameters such as the outside diameter and internal pressure and evaluate how they affect such behavior. In this study, quartic polynomial functions are applied to formulate the maximum crushing force (F_max), maximum permanent displacement (W), and absorbed energy (E) of the pressurized pipelines during the impact problem. The effects of the diameter and pressure on F_max, W, and E are therefore illustrated through analyzing these functions. Response surfaces are also plotted based on the generated quartic polynomial functions and the quality (accuracy) of these functions are verified through several techniques.     

Thermal,mechanical and drug release characteristics of an acrylic film using active pharmaceutical ingredient as non-traditional plasticizer

Abstract

The objective of this study was to investigate thermal and mechanical properties as well as in vitro drug release of Eudragit® RL (ERL) film using chlorpheniramine maleate (CPM) as either active pharmaceutical ingredient or non-traditional plasticizer. Differential scanning calorimeter was used to measure the glass transition temperature (T_g) of 0–100% w/w CPM in ERL physical mixture. Instron testing machine was used to investigate Young’s modulus, tensile stress and tensile strain (%) of ERL film containing 20–60% w/w CPM. Finally, a Franz diffusion cell was used to study drug release from ERL films obtained from four formulations, i.e. CRHP0/0, CRHP0/5, CRHP2/0 and CRHP2/5. The T_g of ERL was decreased when the weight percentage of CPM increased. The reduction of the T_g could be described by Kwei equation, indicating the interaction between CPM and ERL. Modulus and tensile stress decreased whereas tensile strain (%) increased when weight percentage of CPM increased. The change of mechanical properties was associated with the reduction of the T_g when weight percentage of CPM increased. ERL films obtained from four formulations could release the drug in no less than 10?h. Cumulative amount of drug release per unit area of ERL film containing only CPM (CRHP0/0) was lower than those obtained from the formulations containing traditional plasticizer (CRHP0/5), surfactant (CRHP2/0) or both of them (CRHP2/5). The increase of drug release was a result of the increase of drug permeability through ERL film and drug solubility based on traditional plasticizer and surfactant, respectively.