用玻璃球负载纳米级SO4^2-／TiO2固体超强酸催化合成乙酸正丁酯

用玻璃球负载纳米级SO42-/TiO2固体超强酸催化合成乙酸正丁酯,对催化剂的制备条件和乙酸正丁酯的合成条件进行了研究。在最佳反应条件下,乙酸的转化率为99.3%,催化剂重复使用8次后乙酸的转化率仍高达92.3%。该催化剂选择性好,未发现有副产物生成,看来具有较好的应用前景。     

直接和间接电合成制备出的高铁酸钾的物理和电化学性能

K2FeO4 powders were synthesized by the ex-situ and in-situ electrochemical methods, respectively, and characterized by infrared spectrum （IR）, scanning electron microscopy （SEM）, X-ray powder diffraction （XRD） and BET. Their electrochemical performances were investigated by means of galvanostatic discharge and electrochemical impedance spectroscopy （EIS）. The results of physical characterization showed that the two samples have simi- lar structural features, but their surface morphologies and oriented growth of the crystals are different, which results in smaller specific surface area and lower solubility of the ex-situ electrosynthesized K2FeO4 sample. The results of discharge experiments indicated that the ex-situ electrosythesized K2FeO4 electrode has much larger discharge capacity and lower electrode polarization than the in-situ electrosynthesized K2FeO4 electrode. It was found from the results of EIS that lower electrochemical polarization might be responsible for the improvement on the discharge performance of the ex-situ electrosynthesized K2FeO4 electrode.     

新型PA6/PPO合金的研制

采用最新的相容化技术和掺混技术，在尼龙6（PA6）和聚苯醚（PPO）树脂中，加入自制的相容剂，复合增韧剂等，经双螺杆挤出机共混制备出PA6／PPO含量。讨论了相容剂种类及用量，PPO用量，增韧剂的种类对PA6／PPO合金性能的影响。结果表明，当PPO用量为45％，相容剂用量为5％，复合增韧剂用量为10％时，合金的综合性能较好，合金的缺口冲击强度为33.4kJ/m^2，拉伸强度为48.7MPa，弯曲强度为72.0MPa弯曲弹性模量为1750MPa，介绍了PA6／PPO合金的用途。     

Preparation and characterization of PVA/OMMT composites

In this study, polyvinyl alcohol/organically modified montmorillonite (HDA/MMT; organoclay) composite was prepared for the intercalation processes. Firstly, the rheological behavior of aqueous montmorillonite dispersions was investigated as a function of solid content. Hexadecylamine (HDA) was added to the montmorillonite dispersion (2%, w/w) in different concentrations in the range of 5 × 10^?4 – 9 × 10^?3 mmol/L. The basal spacing of the organoclay (OMMT) was studied by X‐ray diffraction. The FTIR spectra are obtained from the modified montmorillonite products, which revealed the characteristic absorbencies after treatment with HDA. HDA/MMT/PVA composite, which was produced by the reaction of 1 wt % PVA solution with organoclay complex, is characterized by the rheology, electrokinetic, XRD, FTIR, and SEM techniques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2315–2323, 2006     

The influence of preparation conditions on electrochemical properties of LiNi0.5Mn1.5O4 thin film electrodes by PLD

LiNi_0.5Mn_1.5O₄ thin films were prepared by pulsed laser deposition (PLD) on stainless steel substrates. The growth of the films has been studied as a function of substrate temperature and oxygen partial pressure in deposition, using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). Electrochemical properties of LiNi_0.5Mn_1.5O₄ thin film cathodes were investigated using cyclic voltammetry and galvanostatic charge/discharge against a lithium anode. The initial capacity and capacity retention of the films are highly dependent on the crystallinity and purity of the films. LiNi_0.5Mn_1.5O₄ thin films grown at 600 °C in an oxygen partial pressure of 200 mTorr are well crystallized with high purity, exhibiting excellent capacity retention between 3 and 5 V with a LiPF₆-based electrolyte.     

Synthesis of highly crystalline spinel LiMn2O4 by a soft chemical route and its electrochemical performance

Highly crystalline spinel LiMn₂O₄ was successfully synthesized by annealing lithiated MnO₂ at a relative low temperature of 600 °C, in which the lithiated MnO₂ was prepared by chemical lithiation of the electrolytic manganese dioxide (EMD) and LiI. The LiI/MnO₂ ratio and the annealing temperature were optimized to obtain the pure phase LiMn₂O₄. With the LiI/MnO₂ molar ratio of 0.75, and annealing temperature of 600 °C, the resulting compounds showed a high initial discharge capacity of 127 mAh g⁻¹ at a current rate of 40 mAh g⁻¹. Moreover, it exhibited excellent cycling and high rate capability, maintaining 90% of its initial capacity after 100 charge-discharge cycles, at a discharge rate of 5 C, it kept more than 85% of the reversible capacity compared with that of 0.1 C.     

Improvement of Pt/ZrO2 by CeO2 for high pressure CH4/CO2 reforming

CH₄/CO₂ reforming over Pt/ZrO₂, Pt/CeO₂ and Pt/ZrO₂ with CeO₂ was investigated at 2 MPa. Pt/ZrO₂, which shows stable activity under 0.1 MPa, and Pt/CeO₂ showed gradual deactivation with time at the high pressure. The deactivation was suppressed drastically on Pt/ZrO₂ with CeO₂ prepared by different impregnation order (co-impregnation of Pt and CeO₂ on ZrO₂, and consecutive impregnation of Pt and CeO₂ on ZrO₂). The amount of coke deposition was found insignificant and similar among all the catalysts (including Pt/ZrO₂ and Pt/CeO₂). Catalytic activity after the reaction for 24 h was in agreement with Pt particle size after the reaction for same period, indicating that the difference of the catalytic stability is mainly dependent on the extent of Pt aggregation through catalyst preparation, H₂ reduction, and the CH₄/CO₂ reforming. Pt aggregation and the amount of coke deposition were least pronounced on (Pt–Ce)/ZrO₂ prepared by impregnation of CeO₂ on Pt/ZrO₂ and the catalyst showed highest stability.     

Electrochemical behaviour of heat-treated AlZnMg alloys in chloride solutions containing sulphate

The electrochemical corrosion and passivation of Al5Zn1.7Mg0.23Cu0.053Nb alloys, submitted to different heat treatments (cold-rolled, annealed, quenched and aged, and quenched in two steps and aged), in sulphate-containing chloride solutions, has been studied by means of cyclic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS). The cyclic polarization curves showed that sulphate addition to the chloride solution produced a poor reproducible shift of the breakdown potential to more positive potentials. The repassivation potentials, much more reproducible, and practically separating the passive from the pitting potential region, were slightly displaced in the negative direction with that addition. When the alloys were potentiodynamically polarized in the passive potential region, sulphate was incorporated in the oxide film, thus precluding chloride ingress. In addition, Zn depletion was favoured, whereas Mg losses were avoided. Different equivalent circuits corresponding to different alloys and potentials in the passive and pitting regions were employed to account for the electrochemical processes taking place in each condition. This work shows that sulphate makes these alloys more sensitive to corrosion, increasing the fracture properties of the surface layer and favouring the pitting attack over greater areas than chloride alone.     

Studies on the synthesis and properties of poly(amide-azomethine)

Homopolymer and copolymer of poly(amide-azomethine) were synthesized from the corresponding diamines and dialdehydes. The polymerization was proceeded in the mixed solvent of o-chlorophenol and m-cresol (1: I by volume) at 0 °C for I S h. The inherent viscosities of the new aromatic poly(amide-azomethine)s are in the range of 0.51 to 2.31 dl/g. These polymers were soluble in sulfuric and formic acid. The TGA results show that no weight loss up to 400 °C under nitrogen atmosphere, which suggests the relatively good thermal stabilities.     

Available nitrogen in soils and its determination by the ‘Nmin-method’ and by electroultrafiltration (EUF)

Excess nitrogen fertilizer rates are an environmental hazard. To avoid excess rates, the level of available nitrogen in the soil must be known and considered for assessing the nitrogen fertilizer rate. In arable soils nitrate and exchangeable ammonium in the rooting depth of a crop are directly available to plant roots. These two nitrogen forms are recovered with the Nmin method and they are considered in assessing the nitrogen fertilizer rate for arable crops.Besides nitrate and ammonium recovered by the Nmin method from soil samples taken in early spring, a considerable amount of organic soil nitrogen may be mineralized during the growth period and contribute to crop nutrition. The nitrogen mineralization potential can be determined in incubation tests. The absolute quantities of mineralized nitrogen thus obtained, however, are much higher than the mineralization rates under field conditions. It is for this reason that incubation tests have not obtained a major importance for assessing nitrogen fertilizer rates.With the electro-ultrafiltration (EUF) method nitrate, ammonium, and a minor portion of organic soil nitrogen are extracted from a soil suspension. There is experimental evidence that this organic nitrogen (=Norg) is easily mineralizable. Based on field experiments with cereals and maize formulae were established by which the nitrogen fertilizer rate can be calculated. In these formulae nitrate, ammonium and organic nitrogen extracted by EUF are considered.Advantages and drawbacks of the Nmin method and EUF method are discussed.