基于物联网与3G整合的电子商务应用资金流探析

文章在简要介绍物联网与3G网络的基础上,阐述了物联网与3G整合背景下电子商务资金流所具备的特点,进而论述了此背景下资金流的优化和作用,最后重点分析了整合背景下电子商务资金流的两个应用案例。     

复合材料蜂窝夹层结构计算的一般方法和进展

本文对目前蜂窝夹层结构有限元分析的方法进行旭纳；对每一种计算模型中所包含的假设作一讨论；指出其适用范围，供设计和强度计算时参考。     

Electro-oxidation of dimethyl ether on Pt/C and PtMe/C catalysts in sulfuric acid

The electro-oxidation of dimethyl ether (DME) on PtMe/Cs (Me = Ru, Sn, Mo, Cr, Ni, Co, and W) and Pt/C electro-catalysts were investigated in an aqueous half-cell, and compared to the methanol oxidation. The addition of a second metal enhanced the tolerance of Pt to the poisonous species during the DME oxidation reaction (DOR). The PtRu/C electro-catalyst showed the best electro-catalytic activity and the highest tolerance to the poisonous species in the low over-potential range (<0.55 V, 50 °C) among the binary electro-catalysts and the Pt/C, but at the higher potential (>ca. 0.55 V, 50 °C), the Pt/C behaved better than PtRu/C. The apparent activation energy for the DOR decreased in the order: PtRu/C (57 kJ mol⁻¹) > Pt₃Sn/C (48 kJ mol⁻¹) ≈ Pt/C (46 kJ mol⁻¹). On the other hand, the activation energy for the MOR showed a different turn, decreased in the following order: Pt/C (43 kJ mol⁻¹) > Pt₃Sn/C (35 kJ mol⁻¹) ≈ PtRu/C (34 kJ mol⁻¹). The temperature dependence of the DOR was greater than that of the oxidation of methanol (MOR) on the PtRu/C.     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites

The primary aim of this paper is to provide an insight on the effect of the location of organoclay on the micro- and nano-scale deformation processes in melt-compounded nylon 66/organoclay/SEBS-g-MA ternary nanocomposites prepared by different blending sequences. In addition, the deformation processes of the ternary nanocomposites were compared to the binary nanocomposites (nylon 66/organoclay and nylon 66/SEBS-g-MA) and neat nylon 66. The incorporation of SEBS-g-MA particles toughened nylon 66 markedly; but the flexural modulus and strength were both reduced. Conversely, the use of organoclay increased the modulus but decreased the fracture toughness of nylon 66. Nylon 66/SEBS-g-MA/organoclay ternary nanocomposites exhibited balanced elastic stiffness and toughness. Stress-whitening studies of the fracture surfaces in terms of gray level were also performed and an attempt was made to correlate the optical reflectivity characteristics with fracture toughness. It was concluded that the capability of SEBS-g-MA particles to cavitate was decreased by the presence of organoclay in the SEBS-g-MA phase, resulting in reduced toughening efficiency. The best micro-structure for toughness and other mechanical properties is thus to maximize the amount of exfoliated organoclay in the nylon 66 matrix rather than to have it embedded in the finely dispersed SEBS-g-MA particles.     

Machinability of Metal Matrix Composites Reinforced by 3-D Network Structure

Metal matrix composites reinforced by three-dimensional (3-D) continuous network structure reinforcement (3DCNRMMC) are difficult to machine due to serious tool wear and poor surface roughness caused by the brittle and hard reinforcement which interpenetrate into ductile matrix. In order to achieve the approach of low cost of 3DCNRMMC, the machinability of it needs to be understood. The influences of three cutting parameters and volume fraction of reinforcement on cutting force were analyzed in detail. The results indicate that: (1) Due to the brittle phase(s) introduced into ductile matrix of composites, there is a large fluctuation of cutting force causing deterioration of machinability. The fluctuation ranges of cutting forces, initially increase rapidly with the increase of volume fraction of reinforcement and then decrease finally, are largest at the range of the volume fraction of 55–65%; (2) The influence of cutting parameters on cutting force is obvious. With the increases of cutting speed, cutting force decreases gradually unless cutting speed exceeds the value of 209 m/min. Cutting forces increase with increasing feed rate and depth of cut; (3) Owing to the large fluctuation of cutting force, there were some cratered surfaces caused by Si₃N₄ reinforcement pulling-out and flaking-off. Some brittle phase protruding from the machined surface caused the deterioration of machined surface.     

基于C8051f020的标准电源控制单元的设计及实现

介绍了基于C8051f020的程控标准电源的控制部分。该控制单元以C8051f020为核心实现了PID控制器及人机交互的设计,并给出了具体实现方法,同时在实际电路的调试中收到了良好的效果。     

基于ARM的广播发射机微控制器硬件系统设计

应用Samsung公司的S3C44B0X嵌入式芯片构建硬件平台,设计广播发射机微控制器。按照其在广播发射机监测控制系统中的控制特点,介绍和论述该微控制器的硬件结构。与传统的基于8/16位单片机构建的系统相比,由于S3C44B0X芯片内置多种实用外设可大大简化电路,从而提高了系统的可靠性,增强了系统抗干扰能力。     

对20Ni9Co5Mo2Cr2V生产过程中问题的分析

分析了20Ni9Co5Mo2Cr2V钢历次冶炼的配料、真空感应熔炼及电渣重熔过程，找到了钢中C过度烧损、浇注的底垫鼓起及电渣重熔过程出现气孔的原因，为冶炼生产提出了建议。     

SHS结合热压制备TiC-Al2O3/Fe-Al复合材料

以天然钛铁矿、铝粉和石墨为主要原料,采用自蔓延高温合成技术、铝热还原法并结合热压烧结技术,制备出TiC—Al2O3／Fe—Al复合材料．研究表明：预热时间少于120s时,预热时间越长,反应燃烧波速度越大,当预热时间继续增大,对反应燃烧波速度的影响不再显著;加入添加剂Y2O3为0．2％时,金属相较均匀地弥散分布在陶瓷颗粒周围．晶粒尺寸约为2～3μm,复合材料的相对密度达到94％,抗弯强度和硬度分别为599．29MPa、83．7HRA．