IIR数字陷波器在回声抑制中的应用

声反馈现象普遍存在于扬声器和麦克风同在一个声场的各种扩声系统中,本文介绍了一种用来抑制声反馈的方法中IIR数字陷波器的设计,并采用了MATLAB仿真分析。     

一种改进的自适应格型陷波滤波器

为解决自适应格型陷波器在迭代过程收敛后存在陷波频率偏移的问题，通过严格的理论分析，论述了陷波参数与引入算子的关系．在推导得出收敛公式的基础上，给出了采用全局输出误差信号作为引入算子的自适应算法,改进后的自适应格型陷波器在不增加计算量的前提下，消除了陷波频率的偏移．仿真结果与理论分析相一致．     

Pole placement with sensitivity function shaping using 2nd order digital notch filters

This technical note deals with the design of robust digital controllers using pole placement with sensitivity shaping by means of the use of digital notch (band-stop) filters. The use of this type of filters drastically simplifies the effective shaping of the sensitivity functions and the resulting procedure competes with the procedure based on the use of Q-parameterization combined with convex optimization (Automatica 35 (1999) 1111). The feasibility of the technique is illustrated by its application to the control of a very flexible arm.     

A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings

This paper proposes an engineering method suitable for predicting the fatigue limit of both plain and notched components subjected to uniaxial as well as to multiaxial fatigue loadings. Initially, some well‐known concepts formalized by considering the cracking behaviour of metallic material under uniaxial cyclic loads have been extended to multiaxial fatigue situations. This theoretical extension allowed us to form the hypothesis that fatigue limits can be estimated by considering the linear–elastic stress state calculated at the centre of the structural volume. This volume was assumed to be the zone where all the main physical processes take place in fatigue limit conditions. The size of the structural volume was demonstrated to be constant, that is, independent from the applied loading type, but different for different materials. Predictions have been made by Susmel and Lazzarin's multiaxial fatigue criterion, applied using the linear–elastic stress state determined at the centre of the structural volume. The accuracy of this method has been checked by using a number of data sets taken from the literature and generated by testing notch specimens both under uniaxial and multiaxial fatigue loadings. Our approach is demonstrated to be a powerful engineering tool for predicting the fatigue limit of notch components, independently of material, stress concentration feature and applied load type. In particular, it allowed us to perform predictions within an error interval of about ±25% in stress, even though some material mechanical properties were either estimated or taken from different sources.     

采用阶梯 T 型谐振器的双陷波 UWB 滤波器

为有效抑制印度国家卫星通信C频段和X卫星频段对超宽带通信系统的干扰,提出了一种新型双陷波超宽带滤波器。该滤波器采用阶梯T型多模谐振器(multimode resonator, MMR)与缺陷地结构(defected ground structure, DGS)的交趾耦合,实现超宽带特性。采用非对称耦合线及在MMR两侧耦合分裂环谐振器的方法,分别在6.67～7.06 GHz, 7.47～7.57 GHz两个频段内产生陷波。实测结果与仿真结果吻合较好,该滤波器的通带范围为3.03～11.50 GHz, 3 dB带宽达到123%,插入损耗仅有0.87 dB,两处陷波中心频率分别在6.87 GHz和7.52 GHz,陷波深度均大于20 dB,且整体尺寸紧凑,仅有16 mm×8 mm大小。     

新型低应力下料工艺实验研究与数值模拟

目的 针对金属棒料精密下料过程中坯料断面质量差的问题,提出一种新型低应力下料致裂方法。方法利用有限元数值模拟构建低应力致裂可控旋弯下料三维有限元模型,模拟下料过程,分析缺口张角参数对下料效率的影响,并根据数值模拟结果进行相应的下料试验。结果 当缺口张角为对称45o时,缺口根部应力集中效应最为显著,坯料断面质量较好,同时下料效率较高。结论 使用新型低应力下料致裂方法能够在提高下料效率的同时保证较好的坯料断面质量,且数值模拟结果与实验结果有较高的一致性。     

不平衡电网电压下T型三电平光伏并网逆变器的有限集模型预测控制

为实现电网电压不平衡时对T型三电平光伏并网系统输出功率和电流质量的控制,以达到入网功率平稳或电流正弦为控制目标,结合光伏阵列输出功率前馈,在两相静止坐标系下提出一种直流母线电压外环PI控制、并网电流内环有限集模型预测控制的控制策略,并在电压外环中引入2倍频陷波器以获得平滑的入网功率参考值。仿真结果表明:当电网电压不对称时,采用所提控制策略能够实现对入网有功、无功功率2倍频脉动及负序电流的分别抑制或协调控制,且并网电流谐波畸变小、入网电能质量高,同时实现T型三电平逆变器的中点电位平衡。     

3.5%NaCl腐蚀环境下2种航空铝合金材料疲劳性能试验研究

腐蚀环境下的疲劳性能是航空金属结构疲劳寿命设计的重要前提,为此,试验测定了2种航空铝合金材料（2E12-T3、7050-T7451）的光滑试样和缺口试样在干燥大气和3.5%NaCl腐蚀环境下的疲劳性能,在试验数据的基础上进行性能对比,并对试样断口进行扫描电镜（SEM）分析,研究了3.5%NaCl腐蚀环境与载荷联合作用对腐蚀疲劳性能的影响机理,研究结果表明：3.5%NaCl腐蚀环境对2种铝合金材料的疲劳性能均产生不利影响,且腐蚀与疲劳载荷的交互作用随着应力水平的降低而增强,疲劳性能下降更明显;与光滑试样相比,腐蚀环境对铝合金2E12-T3缺口试样疲劳性能的影响更大,但对铝合金7050-T7451缺口试样疲劳性能的影响却变小;在腐蚀环境下,裂纹尖端易发生电化学反应产生腐蚀产物和[H]离子,腐蚀产物的存在会阻碍裂纹闭合,同时,[H]离子导致裂纹尖端的氢脆效应,加快裂纹扩展,使疲劳性能降低。     

基于缺口应力法的焊接接头疲劳分析

等效缺口应力法作为焊接疲劳分析的一种局部方法,不仅克服了焊接结构名义应力难以确定和焊根结构应力无法定义的困难,而且能够反映焊接局部后处理对焊接接头疲劳强度的影响,因此近年来备受关注。该文建立了典型焊接接头的三维缺口应力模型,对焊趾根部的缺口应力集中系数进行了求解;通过对对接接头和纵向角接头在焊后未处理(AS-weld)和超声喷丸处理(UPT)两种状态下的疲劳试验数据进行分析处理,获得了两种焊接接头在缺口应力系统下统一的S-N曲线,并与目前国际焊接学会所推荐的具有相同存活率的疲劳寿命曲线(IIW:m=3,FAT=225)进行比较,结果表明,该曲线具有更高的疲劳等级和更低的斜度。     

新型小尺寸双陷波超宽带天线设计

给出了一种小型化具有双陷波特性的超宽带天线的设计方法,采用层叠加载缝隙方式,减小了天线结构尺寸.使用微波仿真软件HFSS对天线的结构尺寸进行了分析和优化,对回波损耗,驻波比和辐射图进行了研究.分析结果表明,在超宽带非陷波频段,回波损耗不大于-10 dB,有稳定的方向图;在3.3～3.8 GHz和5.0～5.9 GHz陷波频段,回波损耗平均有7 dB的增长,产生了很好的陷波抑制作用,避免了在重叠频段系统信号的互干扰,提高了天线系统性能.