不同土性地基考虑 ＳＳＩ效应的隔震结构地震响应分析

为探究不同土性地基的ＳＳＩ效应对层间隔震结构影响机理与动力响应规律,选取一个典型层间隔震结构,对其简化并制作缩尺模型,采用振动台试验的方法,分别在硬土、软土这两种地基上单向输入4条地震波来研究模型的动力响应。结果表明:土体具有明显的放大效应,随着地基土由硬变软,隔震结构周期延长倍数降低。隔震结构在硬土地基上能发挥较好的减震效果,而软土地基上减震效果明显减弱。软土地基上塔楼的动力响应较硬土地基增大,塔楼容易成为薄弱部位,其抗震设计应重点关注。     

Consequences of the formation of Cooper-pairs near oxygen-deficient sites

In this investigation we consider the formation of Cooper pairs near the oxygen-deficient sites in Y-Ba-Cu-O ceramic superconductors which would give rise to an energy-dependent potential as seen by conduction charge carriers. It is shown that Cooper pairs could be formed under such conditions, resulting in a supercurrent. We use the Bogoliubov transformation technique to calculate the energy gap, the energy difference, and the transition temperature of the model superconductor using certain data obtained from previous experiments. Numerical analysis shows that the superconducting current can be explained by the presence of such oscillating Cooper pairs.     

Safe and intuitive manual guidance of a robot manipulator using adaptive admittance control towards robot agility

Key areas of robot agility include methods that increase capability and flexibility of industrial robots and facilitate robot re-tasking. Manual guidance can achieve robot agility effectively, provided that a safe and smooth interaction is guaranteed when the user exerts an external force on the end effector. We approach this by designing an adaptive admittance law that can adjust its parameters to modify the robot compliance in critical areas of the workspace, such as near and on configuration singularities, joint limits, and workspace limits, for a smooth and safe operation. Experimental validation was done with two tests: a constraint activation test and a 3D shape tracing task. In the first one, we validate the proper response to constraints and in the second one, we compare the proposed approach with different admittance parameter tuning strategies using a drawing task where the user is asked to guide the robot to trace a 3D profile with an accuracy or speed directive and evaluate performance considering path length error and execution time as metrics, and a questionnaire for user perception. Results show that appropriate response to individual and simultaneous activation of the aforementioned constraints for a safe and intuitive manual guidance interaction is achieved and that the proposed parameter tuning strategy has better performance in terms of accuracy, execution time, and subjective evaluation of users.     

Multiperson interaction recognition in images: A body keypoint based feature image analysis

Most interaction recognition approaches have been limited to single‐person action classification in videos. However, for still images where motion information is not available, the task becomes more complex. Aiming to this point, we propose an approach for multiperson human interaction recognition in images with keypoint‐based feature image analysis. Proposed method is a three‐stage framework. In the first stage, we propose feature‐based neural network (FCNN) for action recognition trained with feature images. Feature images are body features, that is, effective distances between a set of body part pairs and angular relation between body part triplets, rearranged in 2D gray‐scale image to learn effective representation of complex actions. In the later stage, we propose a voting‐based method for direction encoding to anticipate probable motion in steady images. Finally, our multiperson interaction recognition algorithm identifies which human pairs are interacting with each other using an interaction parameter. We evaluate our approach on two real‐world data sets, that is, UT‐interaction and SBU kinect interaction. The empirical experiments show that results are better than the state‐of‐the‐art methods with recognition accuracy of 95.83% on UT‐I set 1, 92.5% on UT‐I set 2, and 94.28% on SBU clean data set.     

基于OPC UA的数据交互中间件的研究

针对基于DCOM配置的OPC数据集成方式存在配置复杂、需要更改防火墙或网闸设置等问题,设计了一种基于OPC UA的数据交互中间件,介绍了该中间件的结构及功能。该中间件实现了即插即用,只需通过简单配置,就可以跨越防火墙/网闸与OPC服务器进行安全的数据交互,可适用于大多数煤矿自动化子系统OPC服务器的数据集成。     

矿用救生舱环境监控系统软件的研究

给出了矿用救生舱环境监控系统的组成,主要介绍了该系统软件的功能设计、总体架构及界面设计方案。该系统软件可实时显示各传感器的运行状态和检测数据、舱内气体余量、电源电量、照明灯状态、空气净化状态、自动控制状态、舱门状态等,人机交互界面友好,操作简便。该软件经长期连续运行实验,工作正常,达到了设计要求。     

LD3320的嵌入式语音识别系统的应用

语音交互系统是比较人性化的人机操作界面,它需要语音识别系统的支持。LD3320就是这样一款语音识别芯片。介绍了该芯片的工作原理及应用,给出了LD3320与微处理器的硬件接口电路及软件程序。随着高档MCU的不断出现,以MCU为核心的嵌入式语音交互系统会有非常好的应用前景。     

基于光通信的数据单向导入系统的设计与实现

随着信息网络的日趋成熟,网络信息安全尤其是内网信息安全,越来越受到人们的关注,成为一时研究的热点。其中如何防止在移动存储设备与内网计算机信息交流过程中内网信息流失的问题,显得尤为迫切。为此,本文提出一种基于光通信的数据单向导入系统,为用户提供一种安全地将信息或者数据单向导入到内网的解决方案。利用光的单向性,从传输通道上卡断了反向的可能,有效地保护内网的机密信息不会流失到外部,同时做到良好的人机交互,用户可以任意选择存储设备中的文件发送。     

含蓄热式电采暖的综合能源系统日前优化调度策略研究

以含蓄热式电采暖的综合能源系统日前优化调度运行问题为研究对象,分析了蓄热式电采暖系统运行的各种特点,建立了含蓄热式电采暖的综合能源系统运行优化调度模型。将某典型蓄热电采暖用户场景作为算例进行验证,结果表明通过对蓄热式电采暖运行情况进行优化,可以有效降低其对电网的负荷冲击,减小电网峰谷差,提升电采暖设备的使用效率,大幅降低用户采暖的运行费用。该方法可为蓄热式电采暖用户参与和电网互动、促进可再生能源消纳、提升采暖系统经济运行水平、降低电网峰谷差以及促进蓄热式电采暖系统推广等提供参考依据。     

A Web Server for Designing Molecular Switches Composed of Two Interacting RNAs

The programmability of RNA–RNA interactions through intermolecular base-pairing has been successfully exploited to design a variety of RNA devices that artificially regulate gene expression. An in silico design for interacting structured RNA sequences that satisfies multiple design criteria becomes a complex multi-objective problem. Although multi-objective optimization is a powerful technique that explores a vast solution space without empirical weights between design objectives, to date, no web service for multi-objective design of RNA switches that utilizes RNA–RNA interaction has been proposed. We developed a web server, which is based on a multi-objective design algorithm called MODENA, to design two interacting RNAs that form a complex in silico. By predicting the secondary structures with RactIP during the design process, we can design RNAs that form a joint secondary structure with an external pseudoknot. The energy barrier upon the complex formation is modeled by an interaction seed that is optimized in the design algorithm. We benchmarked the RNA switch design approaches (MODENA+RactIP and MODENA+RNAcofold) for the target structures based on natural RNA-RNA interactions. As a result, MODENA+RactIP showed high design performance for the benchmark datasets.