薄板坯表面变形实验分析

对连铸薄板坯的坯壳表面变形的物理模拟实验方法进行了分析,提出一种"铜裹铅双金属"新实验方案,并对坯壳表面弯曲变形进行了分析.     

某接收机测试台系统设计

介绍某接收机测试台设计方案、主要技术特点及实现方法。     

活性炭中甲烷水合物的生成动力学

在温度275．75－279．95K和压力5．6－9．6MPa的静置条件下，测定了14组甲烷水合物在活性炭中的生成动力学数据（压力－时间关系），分析了甲烷水合物在活性炭中生成的物理过程，结合边界层理论和结晶学原理，提出了单液膜传质控制机理的生成动力学模型，并求得了解析解,使用Levenberg-Marquardt方法拟合模型参数，模型预测值与实验值符合良好。     

竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

��ɫ������������ѡ�꾮Һ����ģʽ

本文应用灰色关联分析方法,对70种不同类型和组成的钻井液,进行了两参数流变模式优选及评价。与现行方法比较的结果表明此方法与现行结果的吻合度高,并有新颖、数据要求量少、结论易于比较等优点。     

基于目录服务的跨平台账户管理

讨论了多重帐户问题在计算机网络管理中诸多弊端。提出以目录服务（Novell NDS）为基础，实现跨平台（NetWare、WindowsNT和Solaris）的帐刻统一管理的方案及详细实施实例。     

Studies on Catalytic Side-Chain Oxidation of Nitroaromatics to Aldehydes with Oxygen

The side-chain oxidation of 2-nitrotoluene in liquid phase in the presence of catalytic amount of manganese sulfate and stoichiometric amount of potassium hydroxide with oxygen was studied. In the most favorable conditions, over 80% of conversion of 2-nitrotoluene and 50% of selectivity to 2-nitrobenzaldehyde was achieved. Effects of the reaction parameters on the conversion of the reactant and the selectivity of the product were examined. These results, together with EPR spectroscopic study, show that a benzyl anion was formed in the early stage of the reaction, which was then converted to the final product via a free radical mechanism.     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

新生牛肝活性肽的制备及其毒性检测

目的制备新生牛肝活性肽并评价其安全性。方法采用膜法分离制备新生牛肝活性肽。将3批制品于37～40℃,75%相对湿度条件下存放3个月,以多肽含量为指标观察其稳定性,并进行急性毒性试验、小鼠骨髓细胞微核试验、Ames试验、小鼠精子畸形试验和大鼠喂养试验。结果制备的3批新生牛肝活性肽存放3个月后,多肽含量无明显下降,质量稳定。小鼠和大鼠经口灌人大于20.0g/kg体重的新生牛肝活性肽,均无急性毒性。3种致突变试验均未显示出致突变性,大鼠喂养试验各项指标均未见明显毒性。结论新生牛肝活性肽未表现出明显毒性。     

激光在塑性变形测量中的应用

本文将激光应用于云纹法，研究了缺口滚压强化后根部区域的位移场及应变分布规律。结果表明，本方法是提高塑性变形测量精度的有效手段。