Effect of Organic Additives on Electrochemical Surface Precipitation and Polymorphism of CaCO3

The inhibition effect of three organic additives on the precipitation and polymorphism of CaCO₃ deposited on gold surfaces was investigated using electrochemical and microscopic techniques. Additives, two polyacrylic acid (PAA) polymers with different molecular weights (Mw 2100, Mw 30,000), and 1,2,4,5‐benzenetetracarboxylic acid (BTCA), were either added to the solution before or during deposition. In the presence of 100 ppm of one of the three additives in solution, almost no scale was observed on the surface for at least 24 hours. In the presence of lower concentrations of PAA Mw 2100, only distorted calcite crystals were obtained while with PAA Mw 30,000 the polymorph was spherical vaterite. A mixture of calcite and vaterite was observed with the BTCA additive. Addition of the polymers inhibits further nucleation and growth even if added after partial deposition of CaCO₃ while BTCA has no effect once nucleation has started. The results indicate that the inhibit ion effect of the PAA polymers is due to adsorption on the electrode surface while the effect of BTCA is related to chelation of calcium ions in solution.     

Interface Management within Construction: In Particular, Building Facade

This paper discusses the need for interface management within construction, with particular reference to building facade interfaces. It categorizes the three different types of interface management—physical, contractual, and organizational. The implication of interface management in construction contracting is discussed; it is explained how the U.K. procurement trends have changed, affecting the interface management within projects. U.K. cladding procurement is very fragmented, and the paper maps the development of a typical cladding system showing the complexities of interface management. Finally, the paper discusses CladdISS, a U.K. government funded research project to develop a standardized strategy for the design and management of window and cladding interfaces. It explains the principles of CladdISS with reference to process maps, action plans, management strategy, bibliography, advice on standards, materials, maintenance, joints, movement, and tolerances. This will enable strategies to be developed to avoid the endemic interface problems occurring on-site. It will also guide the management of the interfaces throughout the project.     

Graph‐Theory Approach to Eigenvalue Problem of Large Space Structures

The dynamic analysis and control system design of large space structures involve the solution of the large‐dimensional generalized matrix eigenvalue problem. The computational effort involved is proportional to the third power of the dimension of the matrices involved. To minimize the computational time a graph‐theory approach to reduce a matrix to lower‐ordered submatrices is proposed. The matrix‐reduction algorithm uses the Boolean matrices corresponding to the original numerical matrices and, thus, the computational effort to reduce the original matrix is nominal. The computational savings directly depend upon the number of submatrices into which the original matrix is reduced. A free‐free square plate is considered as an example to illustrate the technique. In this example a matrix of 16th order is reduced to three scalars corresponding to three rigid‐body modes, and three matrices of order three and one matrix of order four.     

Reconstruction of a discontinuous function from a few fourier coefficients using bayesian estimation

The goal of this paper is the application of spectral methods to the numerical solution of conservation law equations. Spectral methods furnish estimates of the firstn Fourier coefficients of the solution. But since the solutions of conservation law equations can have discontinuities, the estimate of the solution by summing the firstn terms of the Fourier series will haveO(1/n) error, even if the Fourier coefficients are known to high accuracy. But if the solution could be accurately reconstructed from its Fourier coefficients, spectral methods could be used effectively in these problems. A method for doing this is to assume a probability distribution for functions. Functions which are smooth away from the discontinuity are assumed to be likely, and those which are not smooth away from the discontinuity are assumed to be unlikely. Then a reconstruction algorithm is chosen by minimizing the expected error over all algorithms. It is possible to put the smoothness assumptions mentioned earlier into an infinite-dimensional Gaussian probability distribution, and then the minimum-error algorithm is well-known and fairly simple to construct and apply. If the Fourier coefficients of the reconstructed function are known exactly, then this approach gives very good results. But when used with Fourier coefficients obtained from a spectral approximation to Burgers' equation, the results were much less impressive, probably because the coefficients were not known very accurately. It is possible to construct filters that reconstruct a function using Legendre or Chebyshev coefficients for information instead Fourier coefficients. It is found that the performance of these filters is similar to the Fourier case.     

Formal methods: The next generation of system design tools

Because of the growing demand for increasingly complex computer-based systems there is now an urgent need to provide tools to assist during the design of such systems. Formal specifications and formal methods provide such assistance but their widespread adoption has been hindered by the so-called ‘math fear’ and the perception that the tools are too difficult, too time consuming and too costly to use in a commercial environment. The aim of this article is to dispel the mystery surrounding the topic and to explain what formal methods are, how and why they are used, the benefits that accrue and why the technology should be accepted on a broader front. The application of formal methods to the design of computer-based systems will be discussed without resorting to jargon or mathematics. The discussion will concentrate more on the software content of systems but the arguments apply equally well to hardware. Some of the available tools will also be introduced.     

Optical measurements of thermal diffusivity of a material

The measurement of thermal diffusivity of a material (in particular, a thin film) is important for various reasons, e.g., to predict the heat transfer in the solid subjected to a thermal process, to monitor surface composition or morphology, or to detect invisible subsurface defects like delaminations. This measurement can be done in a noncontact manner using various photothermal methods. Such methods typically involve pulsed heating of the surface by small amounts using a laser source; the decay of the surface temperature after this pulsed photothermal heating is then probed to provide the thermal diffusivity. Various probing methods have been developed in the literature, including the probing of reflection, refraction, and diffraction from the pulsed heated area, infrared thermal radiometry, and surface deformation. This paper provides an overview of such techniques and some examples of their applications.     

Teaching-Material Design Center: An ontology-based system for customizing reusable e-materials

Use of electronic teaching materials (e-material) to support teaching is a trend. e-Material design is therefore an important issue. Currently, most e-material providers offer a package of solutions for different purposes. However, not all teachers and learners need everything from a single package. A preferable alternative is to find useful material from different packages and combine them for a particular course. Currently, most educators collect the material manually, which is time-consuming and may result in missed material. In this paper, we describe a system – the Teaching-Material Design Center, which follows the standard of Sharable Content Object Reference Model – to separate e-material for use as teaching templates and learning objects and to label the material with use of semantic metadata for searching. This system can find existing teaching templates and learning objects for e-material designers and provide a convenient environment for constructing customized e-material for different requirements. We describe the implementation and evaluation of the proposed system for a course. Our system is efficient in finding teaching templates and learning objects and shortening the e-material development process.