聚酯酰胺热熔胶的合成及其性能研究

研究了以聚酯胶和聚酰胺胶为原料在催化剂作用下加热共熔,通过大分子链交换反应制备织物用聚酯酰胺热熔胶的方法。用聚酯胶的溶剂对所得产品进行溶取试验并且通过红外光谱分析都证明了链交换反应的存在。用该法所得产品粘接强度大,既耐水洗又耐干洗,适用于粘合衬生产。     

A Solder Alloy Filled Z-Axis Conductive Epoxy Adhesive

Epoxy adhesives filled with four different volume fractions of eutectic tin-bismuth solder alloy were prepared and the effect of filler content on the electrical and mechanical properties of these anisotropic electrically conductive adhesives was investigated. The results show that the adhesive containing the lowest amount of the filler alloy had the best combination of conductivity, insulation resistance and shear strength. The DSC-measurements suggested that the filler melts before the cure of the resin begins which allows the filler to wet and bond well to the conductors. This was verified by SEM/EPMA examinations. A temperature cycling test and high humidity, high temperature treatment were conducted on the best composite adhesive. The temperature variation had no effect on conductivity of the joints while humid and hot environment decreased the conductivity.     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

水性聚氨酯胶研究及应用

综述了国内外水性聚氨酯胶特点及应用,对水性聚氨酯乳液的制备及物理性质和聚氨酯胶层的性能进行分析和阐述。     

YW－1无机胶的性能及应用

叙述了ＹＷ－１无机胶的粘接强度，耐高、低温性能，耐水、油、酸、碱性能，耐老化性能等，并介绍了这种胶在机械工业方面的应用，举例说明了这种无机粘接可完全取代机械制造业中所有的过盈配合，因而能创造巨大的经济价值。     

封闭型异氰酸酯胶粘剂的研制

以聚乙二醇（PEG）、甲苯-2,4-二异氰酸酯（TDI）等为原料制得阳离子水性聚氨酯,异氰酸酯用丁二酮肟进行封闭制备封闭型异氰酸酯胶粘剂,探讨了阳离子水性聚氨酯溶液的固含量、TDI的封闭,解封以及封闭型异氰酸酯的用量对产品性能的影响.结果表明：30%的阳离子水性聚氨酯溶液加入溶液质量15%左右的封闭型异氰酸酯的胶粘剂对金属的粘接效果较好.     

“车家宝”胶在制氧机超低温管路漏气上的应用

本文对“东家宝”胶在制氧机超低温管路漏气上的应用作了简要的介绍。     

湿固化聚氨酯热熔胶的合成与表征

以多异氰酸醋PAPI和自制多元醇为原料,采用熔融缩聚法合成出了一种具有快速粘接定位功能的新型反应性热熔胶,并利用FTIR、DSC和力学性能测试等手段对产品进行了表征。结果表明,合成产品不仅具有合理的结构特征,而且还具有良好的使用性能和耐热性能。     

调整工艺条件降低脲醛胶生产的操作成本

根据生成脲醛树脂的反应机理和反应特性,对生产周期的控制步骤——缩聚阶段的工艺条件进行调整,采用在不同反应阶段调整不同工艺条件的方法,使整个反应周期由原来的6．0h缩短到5．0h,从而提高设备利用率、降低生产的操作成本,同时因充分利用反应自身放出的热量,可降低生产能耗。     

有机硅改性丙烯酸酯核-壳结构压敏胶聚合物乳液的研制

采用种子乳液聚合的方法制备了一种新型具有核/壳结构的有机硅改性丙烯酸酯压敏胶聚合物乳液,讨论了多官能团有机硅氧烷功能性单体、核壳单体结构、乳化剂、引发剂以及聚合温度等因素对压敏胶聚合物乳液性能的影响。