Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

缓冲剂在电镀工业中的应用

着重叙述了缓冲剂原理及应用。详细阐述了在电镀工艺中如何选用缓冲剂以及将电镀中的缓冲剂与化学中的缓冲剂的应用加以区别。     

铝合金铁相团球化熔剂的研制

研制了一种铝合金铁相团球化熔剂，在含铁量较高（１．０％－４．０％Ｆｅ）的铝合金中加入该熔剂后，可使针片状的铁相变为团球状或颗粒状组织。从而大幅度提高原合金的机械性能，δｂ和δ分别提高２０％－９０％和４０％－１００％。生产实验表明：该熔剂团球化效果好（具有长效性），极便于在生产中推广应用。     

新型缆用热熔胶的研制

分析了通信线缆用 YH- 4热熔胶组成原料的性能和作用 ,找出影响耐环境高温性能的主要原因 ,并对新研制出的耐环境高温性能 YH- 5热熔胶作了一些分析和探讨 .     

新型难燃输送带胶粘剂的研制

以改性氯丁橡胶为主料、多异氰酸酯为固化剂制成的新型难燃输送带胶粘剂,具有粘接强度高、耐热性好、干燥时间短、难燃等特点,在常温常压下粘接输送带接头,固化30min即可负荷运行。     

HYQ-965-Ⅲ解堵剂的研制及现场应用

针对涠洲11-4油田W11-4D-A1井返吐油基泥浆堵塞油管问题,以渗透剂、乳化剂、分散剂、互溶剂为原料,制备了HYQ-965-Ⅲ解堵剂.考察了不同配方解堵剂中原料间的配伍性和溶垢效果,研究了最佳配方:渗透剂Ⅰ20%、乳化剂Ⅰ10%、分散剂10%、互溶剂10%、海水50%.将该解堵剂在W11-4D-A1井进行应用,从现场使用情况看,HYQ-965-Ⅲ对油基泥浆、原油具有很好的分散能力,成功解除了油管堵塞,达到预期设计要求.     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

硅化腐植酸钠GFN-1的研制

针对目前生产腐植酸硅化产品原料受限的缺点,在大量试验的基础上,确定了一条以腐植酸和硅化剂为主要原料的生产工艺,合成了一种与有机硅腐植酸钾(OSAM-K)性能相当的硅化腐植酸钠产品GFN-1,对其常规性能指标和在清水及无固相聚合物钻井液体系中、在膨润土浆和低固相钻井液体系中应用指标,耐温性能进行了对比实验。实验结果表明,GFN-1作为钻井液添加剂,具有良好的降滤失、降黏、耐温及热稳定性,并兼有优良的控制页岩分散能力,其大多数应用性能相当于或略优于OSAM-K,作为替代品完全能够满足油田现场应用的需要。GFN-1的硅化原料性质稳定、来源广泛,生产工艺简单易行,产品质量稳定,具有较好的推广价值。     

除氧化物剂的除氧机理浅析

对无缝钢管生产所用的内壁除鳞材料———除氧化物剂中各个组分的性质和作用进行了阐述,提出了除氧化物剂的除氧机理。     

Casein Hydrolysate Fractions Act as Emulsifiers in Process Cheese

ABSTRACT: Degrees of hydrolysis and emulsifying activity of casein hydrolysates were the highest at 4 h hydrolysis. The oil-off values of the mixture of hydrolysate (H) or supernatant (S) and traditional emulsifier (T) were not significantly different from the control made with traditional emulsifier, except for S + T = 3:1. Two other samples made with hydrolysate or supernatant only (H or S) showed higher oil-off value than the others (p < 0.05). In flavor property, no difference was found between samples made with traditional emulsifier and those made with the mixture of hydrolysate or supernatant at the ratio of 3 to 1. Therefore, these results indicated that a mixture of the hydrolysate or supernatant and traditional emulsifier might replace a traditional emulsifier in process cheese manufacturing.