临南油田夏52块沙三中泥质砂岩油层精细评价

临南油田夏 5 2块沙三中泥质砂岩油层分布广 ,未动用程度高 ,为了稳定产量 ,急需寻找可直接投产的泥质砂岩油层。本文利用相渗实验资料建立油相相对渗透率与含水饱和度关系 ,从而建立有效渗透率的解释模型。依据有效渗透率和有效厚度将泥质砂岩油层划分等级 ,分区评价 ,这不仅有利于合理开采和保护此类油层 ,降低其生产成本 ,也为预测此类油层产能提供依据     

几何非线性复合材料层合固体壳单元

通过定义广义应力,提出了一个改进的刚度矩阵,以克服固体壳元的厚度自锁问题,并能保证沿复合材料层合结构厚度方向上的连续应力分布;将应力插值函数分为低阶和高阶两部分,建议了一个新的非线性变分泛函,推导了一个用于几何非线性分析的九节点固体壳单元,该单元的计算精度和效率基本上与九节点减缩积分单元相当,与同类型其他单元相比,该单元显著提高了计算效率。     

汽车摩擦片厚度测量装置驱动电路的研究

本文通过对摩擦片厚度在线测量装置系统构成的全面分析，对其驱动电路子系统进行了理论探索和技术研究，完成了相应的电路设计、误差分析及器件选择等工作，并进行了具体的实验验证，证明该驱动电路具有良好的性能，可圆满实现摩擦片厚度在线检测和实时分析的工作任务。     

Influence of process variables on the drying of potato slices

Investigation of the effects of varying air velocity, slice thickness, and pre-treatment with sodium chloride solutions and surface active agents on drying potato slices indicated that the drying occurred entirely in the falling rate period and was controlled by the mechanism of liquid diffusion. The rate of drying, and therefore the diffusion coefficients, increased with the addition of sodium chloride and surface active agents. Diffusion coefficients were also influenced by air velocity and slice thickness, suggesting that the rate of drying of potato slices is controlled by a combination of internal and external resistances.     

冲击回波法检测隧洞混凝土衬砌厚度

冲击回波法是通过接收、分析在混凝土中传播的回波信号，判断结构混凝土厚度和内部质量的新型无损检测技术。室内试验和工程应用研究表明，该方法为隧洞混凝土衬砌厚度检测提供了一个有效的测试手段。     

SIS热塑性嵌段共聚物的生产方法及应用

概述了SIS热塑性弹性体的合成方法以及国内外SIS生产和应用情况。综述了SIS在胶黏剂应用上的特点以及以茂金属为催化剂的SIS新低压加氢工艺的进展和国内SIS发展现状，提出了大力开发C5资源促进我国SIS产业发展的建议。     

Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.     

刹车片减震胶的研制

讨论了高邻位酚醛树脂合成及其它助剂对减震胶性能的影响。研究试制出一种综合性能好的减震胶。     

浅谈集成材用胶粘剂及其发展趋势

本文简单介绍了集成材胶粘剂的选择、种类和特点，并探讨了集成材用胶粘剂的发展趋势。     

黄河西霞院工程地震薄层反射问题的探讨

该文通过黄河西霞院夹砂层勘察存在的问题，引出了地层薄层地震反射同相轴出现的理论依据，从而计算出在本地区探测地层薄层厚度的分辨率。