Proposed modification to the CIECAM02 colour appearance model to include the simultaneous contrast effects

A modified CIECAM02 colour appearance model, named CIECAM02‐m2, is proposed to enable CIECAM02 to predict the simultaneous contrast effect. The structure of the CIECAM02‐m2 is a development from CIECAM02, and contains two different procedures for modifying the reference white; one is for lightness and the other is for hue. The model was tested using a data set accumulated in this study and the LUTCHI data. The CV values for three colour attributes between predictions and experimental data were used to evaluate the accuracy of the model. The low CV values obtained show the performance of the CIECAM02‐m2 model to predict the simultaneous contrast effect satisfactorily. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 121 – 129, 2007     

Modeling Microwave Vacuum Drying Kinetics and Moisture Diffusivity of Carrot Slices

Carrot slices of 3.5 mm thickness were dried in a laboratory microwave vacuum dryer at five different microwave power density levels of 2, 4.66, 7.33, 10, and 12.66 W/g and at three vacuum chamber pressure levels of 6.66, 19.98, and 33.3 kPa to 4-6% d.b. moisture content. Inside the dryer the sample holding plate was rotated with the speed of 4 rpm for uniform microwaves application. The drying rates were increased with the increase in microwave power density at all pressure levels and the Page model was found to be the most suitable model to predict the drying behavior of carrot slices at all process conditions. The Page model drying rate constant (k, min^-1) showed high correlation with microwave power density at constant pressure by a power law equation and showed a logarithmic relationship with the microwave power density and pressure. Similar to the drying rate constant, the average moisture diffusivity at constant pressure was found to be function of microwave power density by power law equation as well as was also dependent on the power density and pressure by a logarithmic relationship.     

A sensitivity analysis of the linear complementarity programming model: Appalachian steam coal and the natural gas market

There have been extensive attempts in recent years to perform spatial equilibrium analysis of commodity markets, particularly that of energy. Most of these attempts have been based on linear programming transportation models, and more recently quadratic programming models. Unfortunately, neither of these modelling approaches can deal with the case of multi-commodity analysis with non-symmetric regression coefficients. In this paper, we overcome this problem by employing the linear complementarity programming model. In addition, we show how the model can be applied to coal and gas energy flows within a single region. Future potential applications of the model are also implied.     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.     

Parallelism in ILU-preconditioned GMRES

A parallel implementation of the preconditioned GMRES method is described. The method is used to solve the discretized incompressible Navier–Stokes equations. A parallel implementation of the inner product is given, which appears to be scalable on a massively parallel computer. The most difficult part to parallelize is the ILU-preconditioner. We parallelize the preconditioner using ideas proposed by Bastian and Horton (P. Bastian, G. Horton, SIAM. J. Stat. Comput. 12 (1991) 1457–1470). Contrary to some other parallel methods, the required number of iterations is independent of the number of processors used. A model is presented to predict the efficiency of the method. Experiments are done on the Cray T3D, computing the solution of a two-dimensional incompressible flow. Predictions of computing time show good correspondence with measurements.     

Actor模型的继承机制研究

Ａｃｔｏｒ模型是一种面向对象的并发模型，但它缺乏对继承机制的支持。本文试图阐明在Ａｃｔｏｒ模型中该支持什么样的继承以及如何支持这种继承。     

光盘的出错率分析和研究

本文通过对光存储系统出错特性的分析，研究了一些描述出错特性的主要参数，并且给出了描述出错特性的Ｇｉｌｂｅｒｔ模型及其改进型模型。     

Dynamic analysis of the NPP pressure sensor system

The aim of the work was to develop on-line methods of control and diagnostics of pressure sensors at a NPP. The analysis was carried out along two lines:

1. i) The detection system including the sensor itself was modeled theoretically to obtain and study its transfer function, and to establish correspondence between the spectral characteristics of the pressure signal.

2. ii) The numerical processing of the signal using the AR technique to reconstruct the transfer function and evaluate the system's response, to a step impulse, as well as the spectral analysis. The hydraulic model presented indicate that the spectral lines observed at 10 Hz are due to longitu-dinal oscillations of water in the system branches, while the response time of the detection system is effectively the time of signal retardation in the porous ceramic diaphragms of the δ-cell of the sensor itself.

     

用面向对象编程实现问题求解自动化

本文从面向对象方法基本原理和面向对象编程的技术特征出发，阐明所建应用软件系统中的对象，类及相应类层次结构和类组合结构，使系统具有很强的表现真空世界复杂系统结构的能力，系统通过消息传递在程序执行中实现对操作的调用机制，使之在面向用户问题选择和执行求解策略方面有很强的适应性，这一点对于强调人－机交互和解题协作的智能决策支持系统设计至关重要，文章给出了用Ｃ＋＋实现的模型对象系统及消息传递机制。