Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

光电微量氧分析仪的改进

简要介绍光电微量氧分析仪的改进。通过仪表几个重要特性的试验数据，概述黄磷反应室三种结构对氧与黄磷反应的影响，并应其反应机理作了理论分析。     

Bimanual interference associated with the selection of target locations.

Four experiments were conducted to identify the locus of interference observed during the preparation of bimanual reaching movements. Target locations were specified by color, and the right-hand and left-hand targets could be either the same or a different color. Movements of different amplitudes (Experiment 1) or different directions (Experiment 2) to targets of the same color were initiated more quickly than symmetric movements to targets of different colors. These results indicate that costs observed during bimanual movements arise during target selection rather than during motor programming. Experiments 3 and 4 further examined the interference associated with target selection. Reaction time costs were found with unimanual movements when the target was presented among distractors associated with responses for the other hand. Interference observed during bimanual reaching appears to reflect difficulty in segregating the response rules assigned to each hand. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.     

反水锤的危害及防止

反水锤是发生在反击式水轮机尾水道中的一种特殊水锤现象，其压力峰值可达正常压力的几倍，甚至十多倍，以致造成肢解转轮、折断导叶、破坏顶盖、抬起转子的严重事故。因此，研究反水锤发生的原因，从而提出防止反水锤事故的措施尤为重要。     

乙醇电氧化的研究进展

简要地叙述了国内外乙醇电催化氧化的研究进展，着重介绍不同电极材料对乙醇电氧化的影响及目前所提山的机理，并对其可能的研究方向提出了建议。     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.     

U(Ⅳ)-U(Ⅵ)同位素交换反应动力学研究 Ⅰ.Fe~(2+)对U(Ⅳ)-U(Ⅵ)同位素交换反应的催化作用

一、前言由于U(IV)-U(VI)同位素交换体系具有相当大的同位素效应和很好的稳定性,并且容易实现两相回流,这对于分离U同位素的工业应用都是十分有利的。但是,U(IV)-U(VI)同位素交换反应速度非常慢,常温下H~+浓度为1.0—4.0 mol/l时,速度常数为1.0×10~(-4)l~2/mol·s。因此要用U(IV)-U(VI)交换体系浓缩铀同位素,必须研究U(IV)-U(VI)交换反应动力学,找到加快交换反应的方法。     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.