Shape memory polymers based on uniform aliphatic urethane networks

Aliphatic urethane polymers have been synthesized and characterized, using monomers with high molecular symmetry, to form amorphous networks with very uniform supermolecular structures, which can be used as photo‐thermally actuable shape memory polymers (SMPs). The monomers used include hexamethylene diisocyanate (HDI), trimethylhexamethylenediamine (TMHDI), N,N,N′,N′‐tetrakis(hydroxypropyl)ethylenediamine (HPED), triethanolamine (TEA), and 1,3‐butanediol (BD). The new polymers were characterized by solvent extraction, NMR, XPS, UV/VIS, DSC, DMTA, and tensile testing. The resulting polymers were found to be single phase amorphous networks with very high gel fraction, excellent optical clarity, and extremely sharp single glass transitions in the range of 34–153°C. Thermomechanical testing of these materials confirms their excellent shape memory behavior, high recovery force, and low mechanical hysteresis (especially on multiple cycles), effectively behaving as ideal elastomers above T_g. We believe these materials represent a new and potentially important class of SMPs, and should be especially useful in applications such as biomedical microdevices. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Nd-Fe-B永磁体化学镀Ni-P合金工艺研究

粘结型Nd—Fe-B永磁体具有组织疏松、孔隙率高、强度低、耐热性差等特点。试验了孔隙封闭、除毛刺、边角滚光及活化除去基体氧化膜等前处理技术。研究化学镀Ni—P工艺，选择一次性化学镀Ni—P合金工艺，成功地解决了Nd—Fe-B永磁体的防腐技术问题。既简化了工艺流程，缩短了施镀时间，又降低了成本。本工艺亦适合烧结型Nd—Fe-B永磁体的防腐。     

复合掺杂Nd（III）和Zn（II）非晶态Ni（OH）2电极活性材料的制备及其表征

以NiSO4、ZnSO4和Nd（NO3）3为原料,采用共沉淀快速冷冻法制备出了复合掺杂稀土Nd（III）和Zn（II）的非晶态氢氧化镍粉体材料。测试发现：样品材料微结构无序性强,结晶水含量较高。将样品材料制备成镍电极并组装成MH—Ni电池,在80mA／g恒电流充电5．5h、40mA／g恒电流放电、终止电压为1．0V的充放电制度下,复合掺杂6％Nd（III）和6％Zn（II）样品材料电池的放电平台为1．2624V,放电比容量为343．12mAh／g,远高于目前应用的B-Ni（OH）2电极活性材料的放电比容量。     

非晶合金变压器的节能效果及应用研究

介绍了非晶合金变压器的性能特点及目前应用情况,结合汉中地区农村配电网实际情况,比较了非晶合金变压器和S9变压器的综合节能及效益,并进行了技术经济综合分析与评价,结果表明：非晶合金变压器具有明显的节能效果,为非晶合金变压器取代传统的硅钢片铁芯变压器提供了科学的依据。     

原子尺寸因素对块体非晶形成能力的影响

块体非晶的研究无论在理论上还是在应用上都有重要意义,而非晶形成能力是决定非晶制备的关键因素之一.通过研究原子尺寸分布对非晶形成能力的影响,计算了原子尺寸差函数与合金非晶形成能力间的关系,系统地分析了其机理,并对其合理性进行了验证.结果表明,原子尺寸差函数可以估计合金体系的非晶形成能力.相同合金体系中,非晶形成能力与基元素的原子百分含量存在线性关系.     

Time optimization of ultraviolet–ozone pretreatment for improving wool fabrics properties

Wool fabrics were exposed to ultraviolet (UV)–ozone treatment for different periods. After exposure, the fabrics were analyzed by Fourior transform infrared spectroscopy (FTIR). Also, the crystallinity and amorphousity regions were followed by an X‐ray diffraction technique. The results were correlated by mechanical properties measurements. After a certain period of exposure, the dyeability and printability were improved because these abilities are strongly related to the percentage ratio of crystallinity regions to amorphousity regions in wool fabrics. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1469–1476, 2002     

非晶Fe—P合金的价电子结构

本文在“固体与分子经验电子理论”的基础上,通过推广的键距差分析,对非晶Fe-P合金的价电子结构进行了分析。结果表明,偏径向分布函数的峰位可视为实验健距,而偏径向分布函数第一峰下的面积可作为等同健距数目,所得结论在一级近似下是合理的。计算结果指出,Fe为B型双态杂化的13阶杂化,而P位于杂化态的第Ⅰ阶,Fe-P之间有很高的共价结合。     

非晶合金凝固过程模拟与界面换热关系

为了准确模拟块体非晶合金凝固过程的温度场,对浇注温度为840℃的非晶合金凝固期间的温度场进行了数据采集.根据界面换热模型与热量守恒定律建立了液固相与铜模之间的界面换热关系式,从而实现了对非晶凝固温度场的模拟.结果表明,合金与铜模之间的界面换热系数随温度的增加而增大.合金在液态阶段降温曲线的模拟值与实测值基本吻合,且当凝固温度降至500℃后,二者偏差也较小.利用界面换热模型并结合实测温度场可以表征非晶合金凝固时的界面换热关系.     

大尺寸非晶合金的制备方法及性能研究

目前大尺寸非晶合金材料的相关研究甚少,为完善大尺寸非晶合金的理论研究和制备方法,促进其快速发展,介绍大尺寸非晶合金的发展历程,详细阐述各种制备大尺寸非晶合金方法的原理及特点,综述大尺寸非晶合金的性能特点及应用现状。     

PLD preparation of GeS6 amorphous film and investigation on its photo-induced darkening phenomenon

GeS6 chalcogenide amorphous fi lm was deposited on glass substrate via PLD（pulsed laser deposition） technique. The performance and structure of the fi lm was characterized by XRD（X-ray diffraction）, SEM（Scanning Electron Microscopy）, EDS（Energy Dispersive Spectroscopy）, optical transmission spectra, and Raman spectra, etc. The GeS6 amorphous fi lm was irradiated by 532 nm linearly polarized light, and its photoinduced darkening was investigated. The results showed that the GeS6 chalcogenide amorphous fi lm was smooth and compact with uniform thickness and combined with the substrate fi rmly, and its chemical composition was in consistency with the bulky target. When laser energy was fi xed, the transparence of the fi lm declined with the increase of the laser irradiation time. Obvious photo-induced darkening and relaxation phenomenon of the fi lm after laser irradiation were observed in this investigation.