Yielding, authoritarianism, and authoritarian ideology regarding groups.

This investigation was prompted by Asch's (1952) discussion of the personal and social significance of yielding to group pressure. For the person, yielding requires the inhibition of overt and perhaps implicit responses to objective situational requirements. For the group, malignant processes may arise and develop, unchecked by those members in whom goals of personal security predominate over group goals. In the present study, the view was taken that both meanings of yielding are assigned positive value in two separate ideologies concerning the group-individual relation. One of these is termed "conformity" and the other is "rugged individualism." In the study, group pressure was simulated by announcing bogus group judgments to small groups of Ss whose apparent task was to match one of three lines of variable length with a standard line. Questionnaires were used to measure variables, which were: the ideology of conformity (IC), the ideology of rugged individualism (RI), ethnocentrism (E), and authoritarianism (F). The questionnaires were administered to 91 college students, both day school and evening. It was found that the correlation with the F scale was .48 (P     

广钢60t直流电弧炉热调试及生产概况

本文回顾广钢60t电炉选型及热调试的情况,并对生产概况进行分析.一年的生产情况表明,60t炉的选型是对的,热调试是成功的,生产的情况是良好的,最高日产23炉,最高班产9炉,最高月产3.23万吨,达到了设计能力.     

锌精矿常压浸出与加压浸出工艺比较

比较了常压浸出与加压浸出两种工艺的机理、流程、技术经济指标、投资以及存在的问题。试验和生产数据表明,加压浸出在技术上和工艺上都更具有吸引力。     

倾斜管中气－液两相流摩擦压降的研究

本文对倾斜管中气一液两相流摩擦压降进行了试验研究。试验参数为：系统压力０～０．６ＭＰａ，水流量０～４ｍ３／ｈ，空气流量０～４０ｍ３／ｈ。得到了计算倾斜管摩擦阻力的计算公式，所得计算结果与试验结果符合良好。     

石墨镶嵌Co纳米晶的形成及其特性

用直流碳弧法在阳极石墨棒中加入金属Ｃｏ产生石墨镶嵌Ｃｏ纳米晶,研究在复合石墨棒中加入不同的Ｃｏ含量对石墨镶嵌Ｃｏ纳米晶的形貌、结构特性及晶粒尺寸分布的影响,探讨石墨镶嵌Ｃｏ纳米晶的形成原因及碳弧法中氦气压力和Ｃｏ含量对掺Ｃｏ阳极石墨棒所产生的碳灰的Ｃ６０／７０产率的影响。结果表明,复合阳极棒中的Ｃｏ含量决定了石墨镶嵌Ｃｏ纳米晶的数量和晶凿直径分布,碳弧法中的Ｈｅ气压力仍是影响掺Ｃｏ阳极棒所产生的碳     

材料力学性能对液力胀接过程的影响分析

为寻求装配式空心凸轮轴结构设计和材料选择的理论依据,应用弹塑性力学分析了弹性模量和流动应力对液力胀接的影响.将内外管的变形过程简化为平面应变问题,根据典型点应力-应变曲线分析了液力胀接过程,并给出了不同材质套管的连接条件.研究结果表明:影响液力胀接的主要因素是内外管弹性模量和流动应力,这两个材料参数决定胀后内外管弹性回复量的大小;实现液力胀接内外管应满足的条件是:内外管弹性模量的比值大于内外管流动应力的比值.     

变极性等离子弧焊铝合金厚板工艺研究

变极性等离子弧焊是一种新型焊接方法,由于等离子弧对焊接工艺和规范参数的变化比较敏感,获得良好焊缝接头的合理规范参数范围窄、裕度小.本文通过工艺试验,探讨了变极性等离子弧焊16mm铝合金厚板的技术可行性,论述了其相对于传统弧焊工艺的优点.     

Binding Properties of RNA Quadruplex of SARS-CoV-2 to Berberine Compared to Telomeric DNA Quadruplex

Previous studies suggest that berberine, an isoquinoline alkaloid, has antiviral potential and is a possible therapeutic candidate against SARS-CoV-2. The molecular underpinnings of its action are still unknown. Potential targets include quadruplexes (G4Q) in the viral genome as they play a key role in modulating the biological activity of viruses. While several DNA-G4Q structures and their binding properties have been elucidated, RNA-G4Qs such as RG-1 of the N-gene of SARS-CoV-2 are less explored. Using biophysical techniques, the berberine binding thermodynamics and the associated conformational and hydration changes of RG-1 could be characterized and compared with human telomeric DNA-G4Q 22AG. Berberine can interact with both quadruplexes. Substantial changes were observed in the interaction of berberine with 22AG and RG-1, which adopt different topologies that can also change upon ligand binding. The strength of interaction and the thermodynamic signatures were found to dependent not only on the initial conformation of the quadruplex, but also on the type of salt present in solution. Since berberine has shown promise as a G-quadruplex stabilizer that can modulate viral gene expression, this study may also contribute to the development of optimized ligands that can discriminate between binding to DNA and RNA G-quadruplexes.     

Ag/LaNixCo1-xO3触点材料的制备及电接触性能研究

本文运用溶胶-凝胶燃烧法合成了双钙钛矿型LaNixCo1-xO3(LNCO)纳米材料,利用粉末冶金和热挤压技术制备了相应的Ag/LNCO触点材料及元件样品。重点考察了不同Ni、Co含量对Ag/LNCO触点材料微观结构、物相组成、物理性能、力学性能及电寿命服役能力的影响,对其电弧侵蚀失效行为进行了研究,并与SnO2粉体增强Ag基触点材料进行对比。结果表明:溶胶凝胶法合成的LNCO纳米颗粒粒径为20-30 nm,经粉末冶金工艺制备的Ag/LaNi0.5Co0.5O3触点材料电学性能和电寿命都优于Ag/SnO2触点材料,其电阻率低至2.10 μΩ?cm,电寿命性能达到51287次。表明Ag/LaNi0.5Co0.5O3触点材料性能较佳,是一种可以取代Ag/CdO的新型触点材料。     

轴流涡轮与排气壳扩压段一维耦合设计研究

为探究轴流涡轮耦合排气壳扩压段的一维设计变量选取规律,提高排气壳扩压段的性能,参考现有NRCC叶栅导叶模型,采用自编程序,结合理论分析构建轴流涡轮与排气扩压段耦合的一维设计模型。详细分析耦合设计中影响扩压段的静压恢复系数以及总体性能的因素。研究结果表明：扩压段面积比、平均倾角、扩张角以及壁面摩擦系数等设计参数不仅影响扩压段的静压恢复系数,也影响涡轮的气动效率;本研究模型在面积比为3.5、平均倾角为30°、扩张角δ为5°时整体性能最优;涡轮出口气流的马赫数、叶顶泄漏流以及出口旋流对扩压段的性能有很大影响,出口半径比的增大会使得静压恢复系数降低,因此在耦合设计时应充分考虑涡轮以上参数的选择。