Method of electrodialysis stack testing with the feed solution concentration regulation

A technique to test electrodialysis (ED) stacks designed to desalt dilute solutions is developed. The technique permits obtaining reproducible data on laboratory and medium-scale units useful for predicting mass transfer characteristics of large ED stacks. Quasi-steady state of desalination process is the main condition to obtain such data. This state can be attained by applying recycling hydraulic modes and special devices to maintain constant pH, or pH and concentration of the feed solution. To obtain data for scaling, it is necessary to apply a fixed voltage on the stack and to use a constant flow rate of the feed solution during the experiment, the feed solution concentration may vary with the time. Specifications of the stacks studied, rational hydraulic and electrical modes of testing are considered.     

A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion

This article investigates the basic combustion parameters including start of the ignition timing, burn duration, cycle-to-cycle variation, and carbon monoxide (CO), unburned hydrocarbon (UHC), and nitric oxide (NO_x) emissions of homogeneous charge compression ignition (HCCI) engines fueled with primary reference fuels (PRFs) and their mixtures. Two primary reference fuels, n-heptane and iso-octane, and their blends with RON25, RON50, RON75, and RON90 were evaluated. The experimental results show that, in the first-stage combustion, the start of ignition retards, the maximum heat release rate decreases, and the pressure rising and the temperature rising during the first-stage combustion decrease with the increase of the research octane number (RON). Furthermore, the cumulative heat release in the first-stage combustion is strongly dependent on the concentration of n-heptane in the mixture. The start of ignition of the second-stage combustion is linear with the start of ignition of the first-stage. The combustion duration of the second-stage combustion decreases with the increase of the equivalence ration and the decrease of the octane number. The cycle-to-cycle variation improved with the decrease of the octane number.     

阳宗海流域冬季典型农村污水污染特征及水质评价

为揭示阳宗海流域不同类型农村污水各污染指标的影响因素和分布特征,选取云南省的海晏村(传统型)和大营村(集镇型)的污水进行水样采集,通过方差分析研究其不同污染指标的浓度变化以及不同类型农村污水水质的差异性,并运用主成分分析法对污水进行水质评价。结果表明:阳宗海流域海晏村污水中的TN、COD均明显超过了城镇污水处理厂污染物排放二级标准,大营村的TP、TN、COD均明显超过了二级标准;pH值与氧化还原电位都是农村污水中污染物浓度的重要影响因子;两村的水质具有显著的差异性;传统型农村的水质比集镇型农村的要好,说明对阳宗海流域造成污染风险更大的是集镇型农村污水。     

Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

新型尿素产品的开发

介绍了国内外新型尿素产品（大颗粒尿素、涂层尿素、包膜尿素、长效尿素）的生产工艺和产品特点。     

水平带式真空过滤机的选择与应用

本文介绍了水平带式真空过滤机的特点和选用，特别讨论了往复盘水平带式真空过滤机的工作原理及主要特点，提出了应用实例及其发展方向。     

Flow regimes,hold–up and pressure drop for two phase flowin helical coils

Experimental results on flow pattern, hold–up and pressure drop are presented for cocurrent upward and downward air water flow in helical coils. A tube of 0.01 m internal diameter was used and the ratio of coil to tube diameter was varied from 11 to 156.5. Water flow rate was varied from 4.9 × 10-⁶ m³/s to 92 × 10-⁶ m³/s while the range of gas flow rate covered was 83 × 10-⁶ m³/s to 610 × 10-⁶ m³/s. A new mechanistic approach is proposed to correlate pressure drop data in coils. The proposed model retains the identity of each phase and separately accounts for the effects of curvature and tube inclination resulting from the torsion of the tube. This makes it possible to use a single model to predict pressure drop for both upward and downward two–phase flow in coiled tubes. Required correlations for hold–up, interfacial friction factor and friction factors for individual phases are provided.     

Silica Nanoboxes as New Nano-structured Materials: Their Secondary Synthesis from Alumina-Rich Zeolites

Novel silica nanoboxes were prepared by controlled dealumination of Na-X and Ca-A type zeolites using ammonium hexafluorosilicate (AHFS). The silica-richer the parent zeolite, the smaller the average pore size produced and the narrower the pore size distribution obtained. This was due to the specific reactivity of the extracting agent with the zeolite framework aluminum atoms. High temperature calcination of the dealuminated X-zeolite (ammonium form) resulted in mesoporous materials exhibiting an ink-bottle shape, a quite high surface area (330 m²/g, no micropores), an average pore diameter of 4.5 nm with a quite narrow pore size distribution (± 1.0 nm) and finally, a pore opening diameter of 3.9 nm. The latter was determined by using the nitrogen sorption isotherms (BET technique) and related pore volume data. The sorption behavior also suggested the interconnecting character of the newly created nanoboxes. The periodicity of these nanoboxes throughout the mesoporous material was clearly shown by X-ray powder diffraction at very small angles. These materials, herein called monomodal nanoboxes because of the absence of micropores in the structure, were also thermally stable. Incorporation of orthosilicate into the obtained silica nanoboxes, in accordance with the recently developed technique for pore size engineering in zeolites, led to materials with smaller pore openings but having almost the same textural properties. Solid superacidic materials were prepared by incorporating a liquid superacid (triflic acid or trifluoromethanesulfonic acid) into the silica nanoboxes using the wet impregnation technique. The maximum triflic acid loading which did not significantly affect the mesoporous framework of the materials was 24 wt%. As a reference, the maximum loading of less acidic sulfuric acid was slightly lower. All this showed the high chemical stability of the silica nanoboxes for supporting very acidic species. Temperature-programmed desorption using a combined DTA/TGA system allowed the identification of the bound phases and some liquid phase of the loaded triflic acid.     

Cure characteristics,morphology, and mechanical properties of ethylene–propylene–diene–monomer rubber/acrylonitrile butadiene rubber blends

Blends based on ethylene–propylene–diene monomer rubber (EPDM) and acrylonitrile butadiene rubber (NBR) was prepared. Sulfur was used as the vulcanizing agent. The effects of blend ratio on the cure characteristics and mechanical properties, such as stress–strain behavior, tensile strength, elongation at break, hardness, rebound resilience, and abrasion resistance have been investigated. Tensile and tear strength showed synergism for the blend containing 30% of NBR, which has been explained in terms of morphology of the blends attested by scanning electron micrographs. A relatively cocontinuous morphology was observed for 70 : 30, EPDM/NBR blend system. The experimental results have been compared with the relevant theoretical models. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

中国古典园林艺术创作对现代园林景观设计的启示

我国古典园林艺术。有着悠久的历史渊源与深厚的文化底蕴,并被赋予了丰富的内涵和寓意,在整个世界园林艺术中,有着独特的魅力和重要的地位。文章通过阐述中国古典园林艺术的创作特色,借助部分范例,进行简单剖析,体现其在园林景观设计中的重要性．以及对我国现代园林景观设计的启示。