Interactive smart battery storage for a PV and wind hybrid energy management control based on conservative power theory

This paper presents interactive smart battery-based storage (BBS) for wind generator (WG) and photovoltaic (PV) systems. The BBS is composed of an asymmetric cascaded H-bridge multilevel inverter (ACMI) with staircase modulation. The structure is parallel to the WG and PV systems, allowing the ACMI to have a reduction in power losses compared to the usual solution for storage connected at the DC-link of the converter for WG or PV systems. Moreover, the BBS is embedded with a decision algorithm running real-time energy costs, plus a battery state-of-charge manager and power quality capabilities, making the described system in this paper very interactive, smart and multifunctional. The paper describes how BBS interacts with the WG and PV and how its performance is improved. Experimental results are presented showing the efficacy of this BBS for renewable energy applications.     

Compact microstrip‐via‐fed wideband circularly polarized antenna with monofilar spiral stub for C‐band applications

A wideband circularly polarized printed antenna is proposed and fabricated, which employs monofilar spiral stubs and a slit in the asymmetrical ground plane which is fed by an asymmetrical microstrip feedline using a via. The CP operation is realized by embedding an inverted‐L shaped strip and a modified ground plane and can be markedly improved by loading monofilar spiral stubs connected to the asymmetric feedline by means of a via. A parametric study of the key parameters is made and the mechanism for circular polarization is described. After optimization, the impedance bandwidth is approximately 3.6 GHz (4.4‐8 GHz) and the 3 dB axial ratio bandwidth is approximately 3.3 GHz (4.7‐8 GHz), which represent fractional bandwidths of approximately 58.1% and 52%, respectively. Therefore, the proposed antenna is suitable for circular polarization applications in C (4‐8 GHz) band. Compared with other recent works, the simpler structure, wider axial ratio, impedance bandwidths, and more compact size are the key features of the proposed antenna.     

中国微米纳米-碳纳米管可控介电泳参数模拟研究

碳纳米管的结构以及微电极的物性参数是微纳器件制备过程中影响介电泳效率与精度的重要因素.微电极形状和电极间距与碳纳米管长度之比(λ)是两个与器件制造成本紧密相关的可控介电泳参数.本文根据有限元方法,研究了这两个参数对于介电泳力的影响规律.通过对3种电极下的碳纳米管介电泳速度进行归一化处理,结果表明碳纳米管在分散液中的介电泳速度受电极形状影响较小.而相比于电极形状,λ对介电泳力的影响更加显著.虽然电极间距越小越有利于碳纳米管的组装,但是考虑微电极加工难度与成本,认为λ在0.5~1.0为碳纳米管组装的优化区间.根据介电泳组装实验需要,给出了溶液阈值浓度修正表达式.本研究对于提高介电泳组装效率和实验精度具有一定的理论指导意义.     

Generation of uniform drops via through-hole arrays micromachined in stainless-steel plates

This study investigated the generation of oil drops using new symmetric and asymmetric through-hole-array devices made of stainless steel. The through-hole-array devices were built by piling up six stainless-steel plates, each having circular micro-holes with a diameter of 300 or 500 μm or micro-slots with a shorter line of 300 or 500 μm. Drops were generated by injecting a dispersed phase (refined soybean oil) via the through-hole array into a compartment filled with a continuous phase (Milli-Q water solution containing one of two emulsifiers). The drop detachment from symmetric and asymmetric through holes was observed in real time and analyzed. Uniform oil drops with average diameters of 1.0–4.1 mm and coefficients of variation of typically less than 6% were generated using symmetric and asymmetric through-hole-array devices. The resultant drop diameters for asymmetric through-hole arrays were significantly smaller than those for symmetric through-hole arrays. This paper also discusses experimental results regarding the effects of the microstructure, the dimensions of the through holes, and the type of emulsifier on drop generation and the resultant drop diameter.     

The electrooxidation of sulfur-containing compounds at boron-doped diamond electrode

The electrooxidation of homocysteine, glutathione (GSH), 2-mercapto ethanesulfonic acid and cephalexin at boron-doped diamond (BDD) electrodes and glassy carbon (GC) electrodes was investigated by cyclic voltammetry. The oxidation of these sulfur-containing compounds exhibited well-defined irreversible responses. This preliminary study has shown that BDD has better sensitivity than GC. Concentration dependence has been studied and indicated the promise of using BDD electrodes for quantitative determination. All of the compounds displayed recognizable oxidation peaks at BDD electrodes at millimolar concentration levels. Scan rate dependence of GSH has been examined. It was shown that there was no adsorption on the surface of the BDD electrode for the low concentration.     

Correlation between acidic properties of nickel sulfate supported on TiO2-ZrO2 and catalytic activity for ethylene dimerization

A series of catalysts, NiSO₄/TiO₂-ZrO₂, for ethylene dimerization was prepared by the impregnation method using an aqueous solution of nickel sulfate. For NiSO₄/TiO₂ -ZrO₂ sample, no diffraction line of nickel sulfate was observed up to 30 wt%, indicating good dispersion of nickel sulfate on the surface of TiO₂-ZrO₂. The addition of nickel sulfate to TiO₂-ZrO₂ shifted the phase transition of TiZrO₄ from amorphous to orthorhombic to a higher temperature because of the interaction between nickel sulfate and TiO₂-ZrO₂. The number of acid sites of NiSO₄/TiO₂-ZrO₂ increased in proportion to the nickel sulfate content up to 20 wt% of NiSO₄. Nickel sulfate supported on TiO₂-ZrO₂ was found to be very active even at room temperature, giving a maximum in both activity and acidity when the catalyst containing 20% NiSO₄ was calcined and evacuated at 500°C The asymmetric stretching frequency of the S=O bonds for NiSO₄/TiO₂-ZrO₂ samples was related to the acidic properties and catalytic activity. That is, the higher the frequency, the higher both the number of acid sites and the catalytic activity for ethylene dimerization.     

各向同性与正交异性材料Ⅲ型界面端应力场

研究了各向同性与正交异性双材料Ⅲ型非对称界面端问题。利用复合材料断裂复变方法,根据任意角度的界面连续条件,求解一类调和方程组的边值问题,讨论了非对称情况下含奇异指数的特征方程,得到了Ⅲ型非对称凸角、凹角界面端的应力场、位移场、应力强度因子的表达式,以及斜平面角界面端应力场奇异性的变化规律。     

基于织物电极的心电监测系统

为解决传统动态心电监测存在的一些问题,例如粘性心电电极刺激皮肤、信噪比随使用时间延长而下降、动态心电图仪缺乏实时分析能力等,研制了一种可穿戴心电异常检测系统。制作了有导电织物材料心电电极的穿戴衣,设计了心电信号采集装置,提出了基于分析R-R间期和QRS波群波形的异常心电波形检测算法,在PDA（Personal Digital Assistant）平台上实现了基于该算法的异常心电信号识别软件。通过实际测试,验证了本系统的有效性和可靠性。     

Effect of electrochemical oxidation on carbon nanotube electrodes of electric double layer capacitors

Electrochemical oxidation of the carbon nanotube (CNT) polarizable electrodes of electric double layer capacitors (EDLCs) was studied. It indicated that electrochemical oxidation elevated the available surface area of the electrodes and introduced some kinds of functional group on the CNT surfaces. The specific capacitances of the polarizable electrodes with organic electrolyte could be enhanced from 22.4 F g-1 to 78.2 F g-1 after electrolysis oxidization. The enhancement of the specific capacitance depends on the extent of electrochemical oxidation. Using acidic electrolyte for electrochemical oxidation has different effects on modifying the performances of the CNT polarizable electrodes compared to using basic electrolyte.     

Enhancing displacement of lead-zirconate-titanate (PZT) thin-film membrane microactuators via a dual electrode design

A common design of piezoelectric microactuators adopts a membrane structure that consists of a base silicon diaphragm, a layer of bottom electrode, a layer of piezoelectric thin film, and a layer of top electrode. In particular, the piezoelectric thin film is often made of lead-zirconate-titanate (PZT) for its high piezoelectric constants. When driven electrically, the PZT thin film extends or contracts flexing the membrane and generating an out-of-plane displacement. Many manufacturing defects, however, could significantly reduce the designed actuator displacement. Examples include residual stresses, warping, non-uniform etching of the silicon diaphragm, and misalignment between the top electrode and the silicon diaphragm. The purpose of this paper is to develop a dual top-electrode design to enhance the actuator displacement. In this design, the top electrode consists of two disconnected (thus independent) electrode areas, while a continuous bottom electrode serves as the ground. The two top electrodes are located in two regions with opposite curvature when the diaphragm deflects. When the two top electrodes are driven in an out-of-phase manner, the actuator displacement is enhanced. Finite element analyses and experimental measurements both confirm the feasibility of this design. When manufacturing defects are present, experimental results indicate that the actuator displacement can be optimized by adjusting the phase difference between the dual top electrodes.