PVC基阻尼涂料的制备及其流变性能

以聚氯乙烯（PVC）为基体，对苯二甲酸二辛酯（DOTP）为增塑剂，与无机填料CaCO3、钙锌热稳定剂、乳化剂OP-10、润滑剂液体石蜡等复合改性制备PVC基阻尼材料，采用动态流变仪DHR、动态热机械分析仪DMA、扫描电镜SEM等对试样的性能和形态进行表征。运用正交设计探究各组分对性能的影响规律，结果表明，填料CaCO3和增塑剂DOTP比例对其阻尼性能影响最显著；当PVC: CaCO3: DOTP: OP-10比重为45: 33: 22: 2时，25℃时频率0.01～150 Hz范围内，tan δ最大值从0.497提高到0.604；剪切速率0.1 s-1时表观黏度为3738 Pa·s，剪切速率150 s-1时表观黏度为2.19 Pa·s，具有优异的抗流挂性与稳定性。通过LASD形态分析构建微观聚集态模型，提出刚性填料团聚-解团聚和聚合物微球变形对流变性能的作用机理，为LASD的持续研究提供技术思路和理论基础。     

Theoretical Models for Binder Burnout

The kinetics of binder burnout, from a ceramic green body, are considered for the case of an "unzipping" binder which decomposes to produce a volatile monomer. The process is considered to fail if the concentration of monomer in the green body exceeds that in equilibrium with vapor at 1 atm (≅10⁵ Pa), when an internal bubble would be expected to form. Steady-state diffusional calculations and computer simulations explore the size and temperature dependence of the process and are in agreement. The model suggests that it is not feasible to burn out a large flat piece greater than about 3 mm thick, without going to very long times of burnout. The kinetics are significantly improved if porosity develops in the piece during the early stages of decomposition, as opposed to the retreat of the binder into the piece on a uniform front.     

合成氨二段转化废热锅炉失效分析

综述合成氨二段转化废热锅炉失效历程分析，废热锅炉列管穿孔、管板泄漏及水压试验泄漏的原因，提出解决对策。     

重组人白细胞介素-10在大肠杆菌中的表达及生物学活性分析

目的在大肠杆菌中表达重组人白细胞介素-10(Interleukin-10,IL-10),并检测其生物学活性。方法将IL-10基因重组到质粒pET11c中,转化BL21(DE),提取质粒,经酶切鉴定和测序分析;在25℃用低浓度的IPTG诱导表达,对包涵体IL-10稀释复性;经ELISA检测其含量,MC/9细胞增殖法检测其生物学活性。结果工程菌IL-10/pET11c/BL21诱导表达的目的蛋白以可溶性和包涵体两种形式存在,Westernblot鉴定证实为IL-10蛋白,两种形式的IL-10均具有一定的生物学活性。结论已成功地在大肠杆菌中表达了IL-10,为进一步纯化和制备IL-10的基因工程药物打下了基础。     

50年来辽宁省不同等级舒适日数演变及空间区划分析

根据1964—2015年辽宁省23个气象站点的逐日平均气温、相对湿度及平均风速资料,采用人体舒适度指数法计算人体舒适度指数,在季尺度上分析辽宁省不同等级舒适日数演变情况及典型旅游城市最佳旅游期;运用旋转经验正交函数分解法(REOF),分析人体舒适度指数季尺度空间变化特征,并应用ArcGIS软件进行舒适区域划分。结果表明:①辽宁省多年平均冷不舒适日数呈降低趋势,舒适日数呈增加趋势,热不舒适日数也呈微弱增加趋势;舒适程度夏季＞秋季＞春季＞冬季;②除冬季外5座典型旅游城市均适宜旅游,夏季为最佳旅游期;其中,沈阳、本溪更适宜春季旅游,大连更适宜秋季旅游。③辽宁省四季舒适度变化情况可大致划分为辽西、辽中、辽东三个区域,具体划分情况随季节有相应变化,总体舒适度由辽宁东部向西部逐渐递减。     

The ageing Australian firefighter: an argument for age-based recruitment and fitness standards for urban fire services

Currently, there is no enforcement of physical standards within Australian fire services post-recruitment, possibly leading to inappropriate fitness and body composition. This study evaluated the impacts of ageing on physical standards of Australian firefighters. Seventy-three firefighters from three different 10-year age groups [25–34 years (n = 27), 35–44 years (n = 27), 45–54 years (n = 19)] volunteered for physical testing using dual-energy X-ray analysis and existing fitness tests used for recruitment by an Australian fire service. Older (45–54 years) participants demonstrated significantly poorer physical standards compared with younger participants including cardiovascular fitness (p < 0.05), strength (p = 0.001) and simulated operational power testing tasks (p < 0.001). Age-related body composition changes were also observed independent of body mass index. Minimum recruitment standards and fitness programs need to account for age-related declines in physical capabilities to ensure that the minimum standard is maintained regardless of age.

Practitioner Summary: Using dual-energy X-ray analysis and established fitness testing protocols, this study aimed to gain an appreciation of the current standards of body composition and fitness of Australian firefighters and the effects of ageing on their physical abilities post-recruitment. The study demonstrated a significant decline in physical standards due to age.     

Comparison of the Effect of a Hydrocarbon Oil and a Terpene Tackifier on the Autohesion of Styrene-Butadiene Rubber

Blends of uncrosslinked styrene-butadiene rubber (SBR) with a terpene tackifier resin or a naphthenic oil have been characterized, and their autohesion and cohesion determined using a T-peel geometry. SBR/oil blends are homogeneous at all proportions, while SBR/resin blends, based on DSC and DMA analysis, undergo bulk phase separation at about 50% resin. However, migration of tackifier to the surface region is proposed at much lower resin contents. Compositions diluted with oil have autohesion similar to the neat SBR. This is attributed to compensating effects; although oil hastens self-bond formation by increasing chain mobility, this is nearly equally balanced by more facile chain separation during bond rupture. In short, oil-diluted compositions are soft and weak. On the other hand, SBR compositions containing small amounts of resin have high autohesion. Resin-diluted specimens deform easily at low strain, just as those containing oil, but intertwined chains of the former have greater resistance to separation, due at least in part to higher glass transition temperatures. It is proposed that autohesion is further enhanced by migration of tackifier to the surface. This causes SBR/resin compositions to be both soft and strong-a necessary condition for high autohesion.     

汽车用塑料注塑新技术的进展

综述了汽车用塑料的注射成型技术的进展，简单介绍了气体辅助注射成型(GAIM)、水辅助注射成型、熔芯注射成型、反应注射／增强反应注射(RIM／RRIM)成型等技术的特点、生产的汽车部件及最新动向。     

蓄水条件下某水电工程坝址区变形体变形 与稳定性研究

库岸边坡在蓄水后的变形和稳定问题一直是水电工程的主要问题, 尤其是坝址区库岸边坡稳定性对水电工程 的正常运营起着至关重要的控制作用。针对黄河上游某水电站库岸一变形体边坡, 在对该变形体边坡基本特征分 析的基础上, 采用数值计算的手段, 对黄河上游某水电站坝址区变形体在自然及蓄水条件下稳定性进行对比分析。 结果表明: 蓄水后变形体边坡的变形具有明显的分区特征, 且坡体的变形受影响较大。同时, 利用强度折减法对变 形体的稳定性系数进行了计算, 变形体的稳定性较好, 考虑到坡体局部稳定性较差, 可能会产生局部失稳破坏, 因 此, 需采取支护措施保证该处坝址区变形体在运营期间的长期稳定性。     

中国涂料现状及今后发展热点(一)

综述了目前中国涂料业的发展概况,并介绍了今后发展趋势和研究热点──防腐蚀涂料、卷材涂料、功能涂料、绿色木器涂料和粉末涂料等5种涂料。