海洋废弃平台桩基拆除绳锯机控制系统研发

海洋废弃平台拆除过程中需要切断桩基,水下绳锯机是一种安全环保的桩基切割工具．介绍了绳锯机的工作原理,提出了控制系统的总体结构,设计了控制系统的硬件和软件,实验表明此控制系统能够使绳锯机安全、稳定的工作．     

高炉法钙镁磷肥探料尺自动跟踪探料技术改造

针对钙镁磷肥生产中高炉探料存在的问题 ,对原自动探料装置的电气控制回路及跟踪装置进行改造 ,增加了探料跟踪最大极限位置 ,获得成功。改造后的自动跟踪探料尺 ,动作准确可靠 ,运行稳定 ,效率高 ,节能降耗 ,直接经济效益每年约 2 5万元 ,提高台时产量间接经济效益每年可达 4 0万元     

Changes in liquid hold-up in foam and size of foam by perforated plates and contribution to mechanical foam-breaking

Changes in the liquid hold-up, ?, and the diameter of d, of a foam that are induced by perforated plates (PPs) and the contribution of PPs to foam-breaking were studied. A foaming system containing a dilute detergent solution in a column with mechanical agitation fitted with a rotating-disk foam-breaker (MFRD) was used. After the foam passed through the PPs, ? and d decreased and increased, respectively. The use of PPs to achieve a maximum reduction in ? and a maximum increase in d is confirmed. It is also demonstrated that use of PPs contributes not only to improving the foam-breaking performance of the MFRD, but also to power savings.     

XRQ-Ⅱ型开车燃烧控制系统的结构及应用

XRQ-Ⅱ型开车燃烧控制系统由泵组、阀组、燃烧器、快速关断阀门及控制柜等组成,燃料经油枪喷嘴雾化喷出在燃烧器中安全稳定地燃烧,控制柜保证供油及点火、火焰检测.在600 kt/a硫磺制酸系统焚硫炉烘炉及催化剂升温中的实际应用表明,XRQ-Ⅱ型开车燃烧控制系统具有便于自控操作、提高焚硫炉烘炉内衬质量、缩短催化剂升温时间等优点.     

风机冷风保安控制系统优化

介绍菜钢型钢AV80风机冷风保安控制系统的优化改造,以增加其控制安全性及可靠性.     

分子筛自控系统原理

介绍分子筛的主要用途,阐述分子筛自动控制原理及故障形成原理.     

断路器控制回路断线技术分析及处理方法

分析变电运行中出现断路器＂控制回路断线＂告警信号的原因,并根据实际运行情况提出处理方法。     

物联网环境下企业内部控制环境研究

物联网作为未来的发展趋势之一,将在各个方面决定未来世界和人类社会的发展方向。而自智慧地球、感知中国等战略提出以来,世界各国也纷纷开展物联网领域的规划布局,将物联网建设上升到国家战略。物联网在全世界范围内掀起了继计算机和互联网之后的第三次信息革命浪潮。在这空前火爆的物联网宏观背景下,微观企业也不可避免的受到物联网影响。在这一背景下,通过分析物联网环境对企业内部控制环境的影响。本文认为,物联网环境下企业内部控制环境将更加信息化、虚拟化、智能化。     

乳胶制品生产的工序能力分析及质量控制

本文分析了乳胶制品的生产过程，并对工序能力指数进行了分析，从而推断出产品的质量。     

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves：convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.