Analysis of the Ductile Strength of Welds Weakened by Notches in Longitudinally Welded Pipes of Large Diameter by the Method of Slip Lines

We study the stressed state of an inhomogeneous welded joint containing an interlayer of a more high-strength material under the action of tensile loads. It is assumed that the contact boundary has a cracklike defect. We deduce analytic dependences of the fracture load on the mechanical inhomogeneity of the joint, thickness of the interlayer, and depth of the defect. The maximum depth of the defect to which the joint is insensitive is established. The proposed theoretical results are innovative and agree with the experimental data obtained for specimens cut out from a pipe of 14KhGS steel.     

Using Bandwidth-Space Partitioning to Improve Cell Coverage and Near-Far Unfair Access Problem in a Noise-Limited CDMA Cellular Network

This paper concerns CDMA cellular networks equipped with conventional matched filter receivers. For this type of cellular networks, two problems exist. One is the inverse relationship between the coverage and capacity, and the other one is the near-far unfair access problem. To resolve these two problems, a bandwidth-space partitioning technique is adopted. Several admission control schemes based on the bandwidth-space partitioning technique are proposed, and their performances are evaluated based on the simulation.Shih-Tsung Yang received his B.S. (1989) and M.S. (1991) degrees in electrical engineering from the National Taiwan University, and Ph.D. (1999) degree in electrical and computer engineering from University of Maryland, College Park.From 1999 to 2000, he was with SBC Technology Resourtces, Inc. where he was involved in the network architecture design for the ATM based networks. From November 2000 to May 2003, he was with Transilica/Microtune where he was involved in the design of Baseband and RF for the wireless communications. Since May 2003, Dr. Yang is now with Genesys Logic, Inc. where he is responsible for the baseband design of the WLAN and Ethernet.Dr. Yang’s research interests are in the area of Digital Communications, Communication networks and signal processing. E-mail: thomas.yang@genesyslogic.com.twAnthony Ephremides received his B.S. degree from the National Technical University of Athens (1967), and M.S. (1969) and Ph.D. (1971) degrees from Princeton University, all in Electrical Engineering. He has been at the University of Maryland since 1971, and currently holds a joint appointment as Professor in the Electrical Engineering Department and in the Institute of Systems Research (ISR) of which he is a founding member. He is co-founder of the NASA Center for Commercial Development of Space on Hybrid and Satellite Communications Networks established in 1991 at Maryland as an off-shoot of the ISR. He served as Co-Director of that Center from 1991 to 1994.He was a Visiting Professor in 1978 at the National Technical University in Athenas, Greece, and in 1979 at the EECS Department of the University of California, Berkeley, and at INRIA, France. During 1985-1986 he was on leave at MIT and ETH in Zurich, Switzerland. He was the General Chairman of the 1986 IEEE Conference on Decision and Control in Athens, Greece and of the 1991 IEEE International Symposium on Information Theory in Budapest, Hungary. He also organized two workshops on Information theory in 1984 (Hot Springs, VA) and in 1999 (Metsovo, Greece). He was the Technical Program Co-Chair of the IEEE INFOCOM in New York City in 1999 and of the IEEE International Symposium on Information theory in Sorrento, Italy in 2000. He has also been the Director of the Fairchild Scholars and Doctoral Fellows Program, an academic and research partnership program in Satellite Communications between Fairchild Industries and the University of Maryland. He won the IEEE Donald E. Fink Prize Paper Award (1992) and he was the first recipient of the Sigmobile Award of the ACM (Association of Computer Machinery) for contributions to wireless communications in 1997. He has been the President of the Information Theory Society of the IEEE (1987) and has served on its Board of Governors almost continuously from 1981 until the present. He was elected to the Board of Directors of the IEEE in 1989 and 1990. Dr. Ephremides has authored or co-authored over 100 technical journal papers and 300 technical conference presentations. He has also contributed chapters to several books and edited numerous special issues of scientific journals. He has also won awards from the Maryland Office of Technology Liaison for the commercialization of products and ideas stemming from his research. He has served on the Editorial Boards of the IEEE Transactions on Automatic Control, IEEE Transactions on Information theory, the Journal of Wireless Networks, and the International Journal of Satellite Communications.He has been the Dissertation Supervisor of over twenty Ph.D. students who now hold prominent positions in academia, industry, and research labs. He is the founder and President of Pontos, Inc., a Maryland company that provides technical consulting services, since 1980.Dr. Ephremides’ interests are in the areas of communication theory, communication systems and networks, queueing systems, signal processing, and satellite communications. His research has been continuously supported since 1971 by NSF, NASA, ONR, ARL, NRL, NSA, and Industry. E-mail: tony@eng.umd.edu     

就地补偿在动力厂水泵电机上的应用实例

就我公司动力厂给水车间155kW水泵电机无功就地补偿的可行性及经济效益进行了分析和研究，对工厂用电如何节能降耗有一定的参考价值。     

芳烃抽提装置技术改造

由于中国石化锦西石化分公司600kt／a连续重整装置的建设，芳烃抽提装置的原料由原来的脱戊烷油变为Ce组分。为此，对抽余油水洗塔和芳烃分离部分的苯塔塔盘，以及苯塔塔顶和塔底抽出部分进行了改造，更换部分机泵和增加变频泵，并将常规仪表改为DCS控制。改造后装置实现一次开车成功，生产出合格产品。抽余油中总芳烃含量小于0．1％，苯回收率达到99%以上。     

Limit load analysis of strength undermatched welded T-joints under bending

An increasing amount of laser beam welded T‐joints (e.g. skin‐stringer) of aluminium alloys are now in use in advanced fuselage applications designed as ‘integral structures’ for weight and cost savings. It is known that weld joints generally show lower strength (undermatching) than base metal in both laser beam and friction stir welded joints of 6xxx series Al‐alloys. Damage tolerance considerations in terms of the residual strength of such joints require limit load solutions to be used in engineering fitness‐for‐service (FFS) analysis. The paper, therefore, provides an upper bound limit load solution in closed form for welded T‐joints (idealized) with strength undermatching and subject to a bending moment. In addition to the necessary requirements of the upper bound theorem, the kinematically admissible velocity field chosen leads to a stress field, which satisfies the equilibrium equations and some stress boundary conditions in the plastic zone. This is an advantage of the solution and, therefore, it is expected that the upper bound obtained is close to the exact limit load of such joints.     

Reliability Analysis of Single-Degree-of-Freedom Elastoplastic Systems. II: Suboptimal Excitations

A method for constructing an approximation of the critical excitation that drives an elastoplastic system from rest to a target threshold at a specified time instant, referred to as the “suboptimal excitation,” is presented in this paper. It is based on the observations gained from study of the critical excitations in the companion paper. Essentially, for the usual case of interest where the failure time is not small compared to the natural period, the duration of the positive and negative pulses of the critical excitation are roughly equal to half of the natural period. This consideration allows for a simple intuitive approximation of the critical excitation. The amplitudes of the positive and negative pulses are obtained in closed forms using energy balance. Numerical investigations show that the critical excitations are well approximated by the suboptimal excitations.     

Evaluation of Laminated Circular Elastomeric Bearings

This paper evaluates the behavior and performance of laminated circular elastomeric bearings and compares them to those of square and rectangular bearings. The study included an experimental evaluation and a nationwide survey of state Department of Transportations on the use and performance of circular bearings and bearings in general in their states. The experimental investigation studied the bearings' behavior in compression, compression and rotation, and compression and shear. Results from this limited study showed that the three bearings have similar stress-strain behavior in compression and they are in agreement with the AASHTO LRFD guide stress–strain curves. In compression and rotation, the AASHTO LRFD substructure moments are slightly less than the measured values for circular bearings and rectangular bearings rotated about their strong axis for a compressive stress of 10.3?MPa (1.5?ksi) and slightly higher than those of rectangular bearings rotated about their weak axis. In compression and shear, the shear stiffness of circular and square bearings is in agreement with theoretical values within the range of design displacements. Results from the survey showed that many states are using circular bearings and more states would consider using them, however no maintenance or monitoring data were available on their short-term and long-term performance.     

催化重整装置的扩能改造

介绍湛江东兴炼油厂的重整装置由200kt／a扩能至300kt／a中有关催化重整反应动力学模拟计算软件的应用、反应工艺技术的改造、装置标定的情况。结合装置实际情况，采用两段装填、两段混氢技术提升了装置的技术水平。标定结果表明，改造后的装置达到了预期目的。     

鞍钢现有人造富矿产能及1600万t/a生铁规模的合理炉料结构的探讨

简要介绍了鞍钢现有人造富矿生产能力，分析了鞍钢生产1600万t／a生铁所需要的炉料数量、品种和质量，并提出了解决炉料缺口的方法和措施。     

高炉与风机配置的优化

根据高炉风机配置的具体情况 ,为充分发挥大风机生产优势 ,建立了适宜的送风制度及装料制度 ,对利旧风机采取了自动防喘振控制、高压水阻软启动的措施 ,风机仪表采用集散控制 ,并优化上料系统 ,提高了高炉上料能力。一系列优化方案保证了高炉稳定、安全、顺行 ,1号、2号高炉利用系数分别由 3 .3 64、3 .43 2t/m3.d提高到 3 .917和 3 .767t/m3.d。