球磨改性处理对Ti0．9Zr0．1Mn1．5合金相结构及储氢性能的影响

系统研究了Ti0．9Zr0．1Mn1．5储氢合金经不同时间（t=0min，10min，30min，60min）球磨改性处理后对其相结构及储氢性能的影响。结构分析表明，Ti0．9Zr0．1Mn1．5合金在球磨改性处理前后均由单一的六方结构的C14型Laves相组成；随着球磨时间的延长，合金粉的平均粒度减小，并出现了部分团聚现象。储氢性能测试表明，铸态合金经4次吸放氢循环后活化，室温最大吸氢量和有效放氢量分别为209．3ml／g和157．6ml／g，放氢率为75．3％；随着球磨时间的延长，合金的活化性能得到改善，室温最大吸氢量和有效放氢量均先升后降，且都在球磨30min时达到相应最高值231．4ml／g和203．8ml／g，放氢率达到88．1％。由此可见，适当的球磨改性处理能有效地改善Ti0．9Zr0．1Mn1．5合金的综合储氢性能。     

硅对定向凝固Ni3Al基合金IC6A微观组织和性能的影响

利用扫描电镜(SEM)、透射电镜(TEM)、电子探针(EPMA)、能谱(EDS)和X射线衍射(XRD)技术研究了硅对定向凝固Ni3Al基合金IC6A微观组织的影响。结果表明在IC6A合金中添加0．10％～0．20％Si(质量分数,下同)会使合金的枝晶间区析出块状的Mo1.24Ni0.76相和Mo6(Ni0.75Si0.25)7相,当硅的添加量达到0．30％时,合金的枝晶间区除了析出这两种相外,还有针状的δ-NiMo相析出。这相的析出不利于合金的高温持久性能,它们的硬度较大,只能通过孪晶的方式变形。硅有利于提高IC6A合金的高温抗氧化性能,而对合金的抗腐蚀性能和瞬时拉伸性能无明显影响。     

Ti-Al基合金中的Hall-Petch关系及影响因素分析

研究了全层片状组织Ti-Al基合金的室温拉伸性能与品团尺寸的关系。Ti-Al基合金的室温拉伸屈服强度和断裂强度与晶团尺寸成Hall-Petch关系。当合金中添加替代元素Cr和Nb时，其Hall-Petch斜率不变；而添加间隙元素C和B时，其Hall-Petch斜率增加。Ti-Al基合金的室温延伸率与晶团尺寸不满足Hall-Petch关系。     

Borides at interfacial zone of IC6 TLP bonded joints

1　INTRODUCTIONTransientliquidphase (TLP)bondingtechniquehasbeensuccessfullyusedinjoiningheatresistantal loys ,likeHastelloyX ,Inconel713C ,In10 0 ,Udimet5 0 0 ,70 0 ,MarM 2 0 0 ,0 0 7,2 4 7,30 2 ,Rene′80 ,TD NiCr ,MA75 4,6 0 0 0 ,PWA14 2 2 ,CSMX 2etc ,whicharesusceptibletohotcrackingor post weldheat treatmentcrackingproblemsduringfusionweld ing[14 ] .Inaddition ,therewerereportsofjoiningNiAlandTiAlintermetallicsbyTLPbondingmethod[510 ] .Forexample ,Galehadinvestigatedthemic…     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

共沉淀法制备三元系铋基焦绿石型陶瓷粉体

采用改进的Mergen A．方案，用氧化锌、三氧化二铋、三氧化二锑为原料，氨水、草酸铵和碳酸铵分别为沉淀剂，盐酸为溶剂，用共沉淀法成功制备了亚微米级颗粒、高活性的铋基Bi1.5ZnSb1.5O7（BZS）焦绿石型介电陶瓷粉体。探讨了用不同的沉淀剂、在不同的烧结温度所得产物的形态。结果表明氨水做沉淀剂在570℃就可生成纯的焦绿石结构。与Mergen A方法相比成本大大降低，可以使瓷片组织的均匀性提高，电性能得到改善，电压梯度下降。     

Benchmarking Fluvial Dynamics for Process‐Based River Restoration: the Upper Rhine River (1816–2014)

Multi‐temporal analysis of river‐floodplain processes is a key tool for the identification of reference conditions or benchmarks and for the evaluation of deviations or deficits as a basis for process‐based river restoration in large modified rivers. This study developed a methodology for benchmarking fluvial processes at river segment level, focusing on those interrelations between morphodynamics (aggradation, erosion, channel shift) and vegetation succession (initial, colonization, transition) that condition habitat structure. Habitat maps of the free‐flowing Upper Rhine River downstream from Iffezheim dam (France–Germany border) were intersected with a geographic information system‐based approach. Patches showing trajectories of anthropization, changeless, progression and regression allowed for the identification of natural and human‐induced processes over almost 200 years. Before channelization, the riverine system was characterized by a shifting habitat mosaic with natural heterogeneity, high degree of surface water connectivity and equilibrium between progression and regression processes. On the other hand, the following 175 years of human interventions led to severe biogeomorphologic deficits evidenced by loss of natural processes and habitat heterogeneity, hydrological disconnection between the river and its floodplain and imbalance of progression versus regression dynamics. The main driving forces of change are found in hydromorphological impacts (channelization, regulation and hydropower plant construction). Regression processes are now almost absent and have to be the objective of process‐based river restoration measures for the studied river‐floodplain system. A sustainable view on water management and river restoration should aim at a more resilient riverine system by balancing the recovery of natural processes with societal needs. Copyright © 2016 John Wiley & Sons, Ltd.     

电冶矾土刚玉质自流浇注料的研究

以电冶矾土刚玉为骨料有利于提高浇注料的自流性能 ;六偏磷酸钠分散剂对Al2 O3泥浆流变性能有较理想的改善作用 ;电冶矾土刚玉质自流浇注料具有优良的抗渣性能 ,这主要同浇注料的显微结构和电冶矾土刚玉骨料的性能相关。