多级结构MoS2/C复合材料的储锂性能

利用二硫化钼和葡萄糖为原料,采用一锅乙醇/水复合溶剂热-后热处理法制备了绣球花状结构MoS₂/C复合材料。考查了乙醇/水复合溶剂的合理组成和MoS₂/C复合材料中碳的合理含量,分别采用SEM和TEM表征了MoS₂/C材料的形貌结构,通过TGA测试和计算了材料中的碳含量。采用循环伏安、恒流充放电和交流阻抗等测试了MoS₂/C复合电极的电化学性能。结果表明,MoS₂/C复合材料拥有多级花球状结构,缓解了MoS₂的团聚,使电极材料的利用率和电化学稳定性显著提高。当V（乙醇）：V（水）为1：2,碳含量为50%时,MoS₂/C复合电极在200 mA·g^-1的电流密度下,充放电循环100次后,可逆容量达到762 mA·h·g^-1。     

The dynamic evolution of aggregated lithium dendrites in lithium metal batteries

Lithium (Li) metal anodes promise an ultrahigh theoretical energy density and low redox potential,thus being the critical energy material for next-generation batteries.Unfortunately,the formation of Li den-drites in Li metal anodes remarkably hinders the practical applications of Li metal anodes.Herein,the dynamic evolution of discrete Li dendrites and aggregated Li dendrites with increasing current densities is visualized by in-situ optical microscopy in conjunction with ex-situ scanning electron microscopy.As revealed by the phase field simulations,the formation of aggregated Li dendrites under high current den-sity is attributed to the locally concentrated electric field rather than the depletion of Li ions.More specif-ically,the locally concentrated electric field stems from the spatial inhomogeneity on the Li metal surface and will be further enhanced with increasing current densities.Adjusting the above two factors with the help of the constructed phase field model is able to regulate the electrodeposited morphology from aggregated Li dendrites to discrete Li dendrites,and ultimately columnar Li morphology.The methodol-ogy and mechanistic understanding established herein give a significant step toward the practical appli-cations of Li metal anodes.     

Technology for recycling and regenerating graphite from spent lithium-ion batteries

With the annual increase in the amount of lithium-ion batteries (LIBs), the development of spent LIBs recycling technology has gradually attracted attention. Graphite is one of the most critical materials for LIBs, which is listed as a key energy source by many developed countries. However, it was neglected in spent LIBs recycling, leading to pollution of the environment and waste of resources. In this paper, the latest research progress for recycling of graphite from spent LIBs was summarized. Especially, the processes of pretreatment, graphite enrichment and purification, and materials regeneration for graphite recovery are introduced in details. Finally, the problems and opportunities of graphite recycling are raised.     

A panoramic view of Li7P3S11 solid electrolytes synthesis,structural aspects and practical challenges for all-solid-state lithium batteries

The development of an inorganic electrochemical stable solid-state electrolyte is essentially responsible for future state-of-the-art all-solid-state lithium batteries (ASSLBs). Because of their advantages in safety, working temperature, high energy density, and packaging, ASSLBs can develop an ideal energy storage system for modern electric vehicles (EVs). A solid electrolyte (SE) model must have an economical synthesis approach, exhibit electrochemical and chemical stability, high ionic conductivity, and low interfacial resistance. Owing to its highest conductivity of 17 mS·cm^-1, and deformability, the sulfide-based Li₇P₃S₁₁ solid electrolyte is a promising contender for the high-performance bulk type of ASSLBs. Herein, we present a current glimpse of the progress of synthetic procedures, structural aspects, and ionic conductivity improvement strategies. Structural elucidation and mechanistic approaches have been extensively discussed by using various characterization techniques. The chemical stability of Li₇P₃S₁₁ could be enhanced via oxide doping, and hard and soft acid/base (HSAB) concepts are also discussed. The issues to be undertaken for designing the ideal solid electrolytes, interfacial challenges, and high energy density have been discoursed. This review aims to provide a bird's eye view of the recent development of Li₇P₃S₁₁-based solid-state electrolyte applications and explore the strategies for designing new solid electrolytes with a target-oriented approach to enhance the efficiency of high energy density all-solid-state lithium batteries.     

Room-Temperature Solid-State Lithium Metal Batteries Using Metal Organic Framework Composited Comb-Like Methoxy Poly(ethylene glycol) Acrylate Solid Polymer Electrolytes

Solid polymer electrolyte with good thermal stability and flexibility is an excellent candidate for solid-state lithium metal batteries, while its low ionic conductivity caused by high crystallinity limits its application at ambient temperature. Here a metal organic framework (zeolitic imidazolate framework-8, ZIF-8) composited comb-like methoxy poly(ethylene glycol) acrylate polymer electrolyte (MCPE) with high ionic conductivity (9.96 × 10⁻⁵ S cm⁻¹ at 30 °C) is prepared by an in situ UV polymerization method. The as-prepared MCPE exhibits improved mechanical property due to the introduction of porous ZIF-8 nanofillers, which is beneficial to suppress the growth of lithium dendrites. Consequently, the LiFePO₄||MCPE||Li cells show a high capacity of 116 mAh g⁻¹ at 30 °C and 0.5 C, and maintain 89.4% of initial capacity after 150 cycles with the average Coulombic efficiency of 99.9%. These results demonstrate that the MCPE shows great potential in solid-state lithium metal batteries near room temperature.     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Phase transition of lithiated-spinel Li2Mn2O4 at high temperature

1 Introduction Lithium manganese oxides are the most attractive cathode materials for rechargeable lithium-ion batteries because of their low-cost and less toxicity when compared with either cobaltates or nickelates[1?3]. Among these oxides, the spinel-fr…     

锂离子电池正极材料第一原理计算研究

利用第一原理计算方法可分析和预测锂-金属氧化物电池正极材料在Li离子嵌入脱出过程中的电势和稳定性等性能。本文详细介绍了第一原理计算方法的理论背景以及目前LiCoO2正极材料计算研究的现状。利用此方法对LiNiO2及多组分材料掺杂进行研究是今后工作的重点。