齿轮类零件电子束焊接结构的合理性分析

综述了齿轮类传动零部件采用电子束焊接加工的优越性，指出零件在不同结构尺寸、不同使用环境以及不同工艺状态下应选用与电子束焊接工艺相适应的焊缝结构，并对不同零件的焊缝接头结构形式的合理性进行了深入分析。     

Electron beam deposition and characterization of thin film Ti-Ni for shape memory applications

Thin film of Ti-Ni alloy has a potential to perform the microactuation functions required in the microelectromechanical system (MEMS).It is essential, however, to have good uniformity in both chemical composition and thickness to realize its full potential as an active component of MEMS devices.Electron beam evaporation technique was employed in this study to fabricate the thin films of Ti-Ni alloy on different substrates.The targets used for the evaporation were first prepared by electron beam melting.The uniformity of composition and microstructure of the thin films were characterized by electron probe microanalysis (EPMA), Auger electron spectroscopy (AES), X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM).The mechanical property of the thin films was evaluated by the nano-indentation test.The martensitic transformation temperature was measured by differential scanning calorimetry (DSC).It is confirmed that the chemical composition of deposited thin films is identical to that of the target materials.Furthermore, results from depth profiling of the chemical composition variation reveal that the electron beam evaporation process yields better compositional homogeneity than other conventional methods such as sputtering and thermal evaporation.Microstructural observation by TEM shows that nanometer size precipitates are preferentially distributed along the grain boundaries of a few micron size grains.The hardness and elastic modulus of thin films decreases with an increase in Ti contents.     

Optimization algorithm for ultra-sparse arrays in regional energy focusing

The setting of ultra-sparse arrays is one of key factors for the performance of regional energy focusing.This paper focuses on one of its typical applications:Precision Electronic Warfare by UAV,and proposes an optimization algorithm for ultra-sparse arrays to maximize the performance of regional energy focusing.First,we establish the joint optimization model of the interference waveform and the positions of elements.Second,particle swarm optimization (PSO) is adopted to iterate the positions of elements.Then,the target value of the subproblem is solved for the fitness criterion,as the current array is known in each step of the iteration.Finally,we get the optimal solution of the interference waveform and the ultra-sparse array by this method.Numerical results indicate that the algorithm can optimize the array effectively,and improve the indicators of regional energy focusing obviously.Whether the localization errors of elements exist or not,the algorithm provides a better performance than existing algorithms which only design the interference waveform.     

PREPARATION OF TiN FILMS BY N_2 ASSISTED Xe~+ ION BEAM ENHANCED DEPOSITION AND THEIR MECHANICAL PROPERTIES

A new method for preparation of hard TiN films has been developed by using electronbeam evaporation-deposition of Ti and bombardment with 40 keV Xe~+ ion beam ina N_2 gas environment.The synthesized TiN films were superior to PVD and CVDones in respects of improved adhesion to substrate and low preparing temperature.Theyexhibited good wear resistance and high hardness up to 2200 kg/mm~2.Some industrialapplications have been reported.     

Effect of pulse parameters on microstructure of joint in laser beam welding for SiC_p/6063 composite

1　INTRODUCTIONSiC particlesreinforcedcomposites ,thankstotheirlowcostsandhighlevelofstructuralproperties ,areshowingtheirpotentialincivilandmilitaryappli cation .SiC particlesreinforcedaluminummatrixcomposites wideapplicationinaerospaceandautomo tiveareattributedtotheirperformanceofhighspecif icstrength ,highspecificstiffness ,highelasticmodu lusandexcellentwearresistance .Thecoefficientofthermalexpansionandthermalconductivitycanberegulatedbychangingthecontentandsizeofrein forcingparticl…     

简支深梁用和函数法的级数解答

引用和函数法求解弹性力学平面问题, 对简支深梁受三角形荷载作用时的应力进行了分析,同时给出了该问题的付立叶级数解答,该方法不仅将求解弹性力学的偏微分方程组解耦成非耦联的几个偏微分方程,而且其结果与传统的Airy应力函数得到的解答完全一致, 证明了该方法的正确性和适用性,该方法拓展了将经典的弹性力学解析法用于解决工程实际问题的空间。     

用丝束电极研究混凝土中钢筋腐蚀的不均匀性

用8×8阵列丝束电极模拟研究了混凝土中钢筋的腐蚀.将混凝土试样浸泡在10 %NaCl溶液中,通过测量铁丝束电极的自腐蚀电位和极化电阻,获得了在相同埋置深度和不同埋置深度时,铁丝腐蚀的电位、极化电阻和腐蚀速度分布等信息,研究了混凝土结构和氯离子浓度对它们的影响.结果表明,混凝土中铁丝腐蚀不均匀.自腐蚀电位和极化电阻较分散,电位随时间负移、极化电阻变小,丝束之间的电位差增大.随铁丝埋入深度增加,电位负移量、氯离子浓度和腐蚀速度都减小、极化电阻增加     

强流脉冲离子束表面再制造技术原理与应用

采用TEMP-6型强流脉冲离子束(HIPIB)装置开展了HIPIB表面再制造技术的研发.HIPIB装置主体由高压脉冲电源系统和高功率离子二极管系统组成,通过高压短脉冲在二极管中放电产生阳极等离子体并引出ns级强流离子束.HIPIB辐照材料表面,发生显著的熔融、蒸发和剧烈烧蚀,物质喷射的反冲作用在辐照表面形成由表及里的应力波,导致材料表层强烈的热-力学效应.利用HIPIB与材料表面的相互作用,应用于涡轮叶片表面的清洗维修,可有效去除涡轮叶片基体因高温氧化形成的氧化物,伴随表层的重熔将叶片基体表面微观缺陷焊合,获得了光滑、平整的涡轮叶片修复表面.实现了HIPIB辐照在涡轮叶片表面再制造方面的应用.     

Electron beam welding of Re and BT5-1 titanium alloy

Based on the binary alloy phase diagram of Re-Ti, the weldability of Re and BT5-1 titanium alloy was analyzed. Using two methods of direct electron beam welding （EBW-D） and intergradafion electron beam welding （EBW-I）, Re and BT5-1 was welded. Experimental results show that the joint figuration of EBW-D between Re and BT5-1 is not fine, and the joint is inclined to brittleness rupture. The joint figuration of EBW-I between Re and BT5-1 is fine. No cracking and other disfigures occur in the intergradation joint. The element distribution of Re, Me, and Ti in the weld metal is progressional diversification.