Analysis of multipoint transmission at higher frequencies using 3‐D ray tracing

The target of this article is to analyze the impact of multipoint transmission e.g. joint transmission (JT) in an outdoor microcellular environment at 15 and 28 GHz frequency through simulations. The impact of the JT threshold i.e. the threshold for switching between the single and multipoint transmission mode is also analyzed in this article. For this research activity, a “sAGA” MATLAB based 3‐D ray tracing tool is used for the simulation purpose. The received signal power and throughput are used as a performance metrics for the analysis. The simulation results show that the JT from two transmission ports provides up to 12.46% and 17.78% of relative throughput gain with respect to the transmission from single port at 15 and 28 GHz, respectively. The multipoint transmission with certain decibels (dBs) of JT threshold is found to be more efficient compared with the undefined JT threshold. In the light of simulation results, the JT is found as a promising technique for compensating the propagation loss at higher frequencies, and especially in a critical handover region the multipoint transmission helps in making a smooth handover.     

Joint optimization method of failure probability and fiber-link load balancing in flexible bandwidth optical network

In order to gain insight into the relationship between the failure probability and the spectrum efficiency,both failure probability (FP) and load balancing (LB) were attempted to minimize in flexible bandwidth optical networks.An optimized FP-LB algorithm was developed to reduce failure probability and to improve the spectrum efficiency,and a traditional algorithm was further introduced for comparison in flexible bandwidth optical networks.Simulation results show that the optimized FP-LB algorithm reduces 69.8% blocking probability,45.3% spectrum occupancy rate,and 41.9% average failure probability compared to the traditional algorithm.Obviously,the optimized FP-LB algorithm achieves the joint optimization of both failure probability and load balancing.     

考虑铰链间隙的水面并联稳定平台动力学分析

针对某小型浮式稳定平台结构紧凑、负载惯量大的特点,设计了一种以少自由度并联机构为基础的改进型串联与并联机构。根据该平台的结构特点,进行了运动学分析,推导了系统雅可比矩阵,并利用Lagrange方法建立了平台的动力学模型,分析了平台的动力学特性。为分析含间隙的支链受力,将其简化为刚体—弹簧模型,通过改进的Hertz接触理论,采用非线性弹簧阻尼模型计算接触力,最终建立了含铰链间隙的平台动力学模型。数值计算与实验结果表明了数据建模的有效性,同时铰链间隙对动平台的位置精度和动力学特性产生了显著影响,对平台结构产生了较强的冲击。     

装甲车辆防护装甲胶粘挂装技术研究

针对防护装甲采用螺栓紧固、挂架支撑等方式安装在装甲车辆上所产生的防护面积降低、工艺复杂等问题,提出采用胶粘挂装技术安装防护装甲。根据安装结构特点,确定胶粘剂的种类和制备工艺。通过研究胶粘接头不同胶粘层厚度和不同胶粘面积对挂装强度的影响,实现防护装甲胶粘挂装结构的优化设计。通过模拟跑车宽频振动试验、环境极限温度适应性考核试验,验证胶粘挂装技术的可行性和可靠性。试验结果表明：采用双组份聚氨酯胶粘剂,胶粘层厚度为2～3 mm, 多点、小面积施胶,每平方厘米胶粘面积可承载大于3 MPa的剪切力,-50 ℃和70 ℃的极限温度下强度不低于常温条件下的70%,满足动态宽频振动挂装强度要求。     

塑性混凝土防渗墙与防渗土工膜联合应用分析研究

该文主要是通过朝面山水库防渗设计采用塑性混凝土防渗墙与防渗土工膜结合使用,根据模型计算分析可知,该方案防渗效果较好,是可行的、有效的防渗措施,可在水库加固中加以推广。     

钪锆微合金化焊丝焊接头的组织与性能

用ER5356铝镁合金焊丝和用钪和锆复合微合金化的铝镁合金焊丝对7A52铝合金板材进行手工钨电极惰性气体保护焊,随后对焊接接头的显微组织和力学性能进行了研究。结果表明,7A52铝合金焊接接头的力学性能低于基板的性能,焊缝区和热影响区是焊接接头上两个最薄弱的区域。用钪和锆复合微合金化的铝镁基合金焊丝与ER5356铝镁合金焊丝比较焊接,板材焊接接头的屈服强度和延伸率分别提高了24%和37%,分析认为其强化和韧化的机制主要是含钪和锆的化合物粒子的晶粒细化作用及其弥散强化作用。     

高强度耐候钢Q355对接接头多次焊修力学行为研究

通过焊接工艺评定试验以及疲劳试验,分析高强度耐候钢Q355GNHD正常对接接头和3次焊修接头的显微组织、常规力学性能以及疲劳结果差异。结果表明:3次焊修接头熔合良好,显微组织未见马氏体;3次焊修焊接接头和正常焊接接头的拉伸、弯曲及硬度等常规力学性能未见明显差异;3次焊修接头过热区组织粗大,冲击功有所降低,但均满足标准规定的焊接接头技术条件;两种焊接接头的疲劳性能相近,符合设计要求。     

Computing the k-error joint linear complexity of binary periodic multisequences

Complexity measures for multisequences over finite fields, such as the joint linear complexity and the k-error joint linear complexity, play an important role in cryptology. In this paper we study a fast algorithm, presented by Venkateswarlu A, to computer the k-error joint linear complexity of a binary periodic multisequence. In this paper, the aim is mainly to complement the theoretical derivation and proof of the existing algorithm. Moreover, our algorithm reduces computation.     

用全光联合变换相关实现目标识别

本文提出了两种改善全光联合变换相关器性能的方法,其一是对输入面上的待识别图像和科像进行图像分割,以得到更高更尖锐的相关峰;其二是用多参考图像,产生一个标准的相关称,为确定待识别图像和参考图像相关程度提供判别依据,使进行目标识别更加简洁方便。通过实验证明了这些改善方法的可行性,并给出了实验结果。     

一种近似的联合概率数据互联算法

提出了一种新的联合概率数据互联的算法。该算法针对传统的联合概率数据互联算法在产生互联假设事件时计算代价大的问题,提出了一种绕过互联假设事件的生成而直接计算量测和目标的联合概率的方法,通过仿真实验证明,该法在目标密集程度中等的杂波环境下,计算代价得到了大幅的降低,而关联精度仅有少许降低,能够适应工程的要求。