参考信号频率自调整的数字相敏检波器算法的研究

本文提出了一种不需要外接同频参考信号的数字相敏检波器算法。该算法首先提取计算机产生的参考信号与被测信号频率的差值，然后根据该差值调整参考信号的频率直到满足要求。本文还讨论了数字相敏检波器的幅频特性，仿真试验表明理论分析与实际结果是一致的。该算法可以用于同频参考信号不能获得时正弦信号的幅度和相位测量。     

微机对调制信号的包络解调

应用检相原理，可以提取有限长度调制信号和包络解调。通过改变Ａ／Ｄ转换器的位数，提高检相分辨率，它与检测对象的速度无关。这为提高检相分辨率展示了新的途径。     

高功率激光焊接光致等离子体的检测

系统地归纳了高功率激光焊接过程中光致等离子体的声、光、电、热等四种特征信号，综述了国外在等离子体信号检测方面的试验方法及研究进展，分析了未来的发展趋势     

Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

RSFM网络及其在信号滤波中的应用

介绍了一种适用于模式识别的新型神经网络模型--局部有监督特征映射（Reglonal Supervised Feature Mapping,RSFM）网络,描述了该网络的拓扑结构和学习算法,研究了网络的基本性能,最后将其应用到了信号滤波中.理论研究和仿真实验表明,该网络结构简单、算法简洁,收敛速度快、识别精度高,适用于需要大样本训练、随机干扰严重的复杂模式的分类与识别.     

Application of condition-based HRA method for a manual actuation of the safety features in a nuclear power Plant

A practical approach to develop a more realistic fault-tree model with a consideration of various conditions endured by a human operator is proposed. In safety-critical systems, the generation failure of an actuation signal is caused by the concurrent failures of the automated systems and an operator action. These two sources of safety signals are complicatedly correlated. The failures of sensors or automated systems will cause a lack of necessary information for a human operator and result in error-forcing contexts such as the loss of corresponding alarms and indications. It is well known that the error-forcing contexts largely affect the operator's performance. An automated system which consists of multiple processing channels and complex components is also affected by the availability of the sensors. This paper proposes a condition-based human reliability assessment (CBHRA) method in order to address these complicated conditions in a practical way. We apply the CBHRA method to the manual actuation of the safety features such as a reactor trip and auxiliary feedwater actuation in Korean Standard Nuclear Power Plants. Even the human error probability of each given condition is simply assumed, the application results prove that the CBHRA effectively accommodates the complicated error-forcing contexts into the fault trees.     

Comparison of mass transfer efficiency in horizontal rotating packed beds and rotating biological contactors

In this study, the mass transfer efficiencies of a novel horizontal rotating packed (h‐RPB) bed and the conventional disc‐type rotating biological contactor (RBC) were studied at four speeds and seven submergences. Pall rings of two different sizes (25, 38 mm), superintalox saddles and a wiremesh spiral bundle were used as packings in the h‐RPB. Volumetric gas–liquid mass transfer coefficients were determined by unsteady state absorption of atmospheric oxygen in de‐aerated water. Power consumption per unit liquid volume has been found for all geometries tested. The oxygen transfer efficiency values for the h‐RPB were found to be 2–5 kg kWh^?1 and for the disc RBC were found to be 1–2 kg kWh^?1. The performance of the h‐RPB was also compared with other gas–liquid contactors such as surface aerators. The study proves that the h‐RPB is a energy efficient alternative to conventional contactors. Copyright © 2005 Society of Chemical Industry     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

井口信号无线数传系统

目的　介绍了井口信号无线数传系统的设计 .方法　无线数传、低功耗电路设计 .结果　省去了井口信号线 ,降低了井口工作量 .结论　提高了测量精度和可靠性     

智能钻井电缆信号传输的研究现状及难点

目前，钻井中井下检测信号的传输主要运用泥浆脉冲、电磁波等方式。随着井深的增加、复杂结构井和欠平衡井的增多以及对传输速度要求的提高，电缆信号传输必然是今后智能钻井的发展方向。通过对半个多世纪来各类电缆信号传输的设计进行归类，详细介绍了其设计原理，提出了电缆信号传输设计的基本要求与难点。