基于种群多样性的自适应PSO算法求解VRPSPD问题

为有效求解逆向物流车辆路径(VRPSPD)模型,本文提出一种基于种群多样性的自适应PSO算法(SDAPSO)。在SDAPSO运行时,根据种群多样性,自适应地对种群中运行较差的粒子进行扰动操作,提升这些粒子向最优解收敛的能力;同时,对全局最优粒子进行概率扰动,以增加种群的多样性。标准检测函数的仿真结果表明SDAPSO算法是对基本PSO算法的有效改进。在对VRPSPD模型求解中,通过与其它粒子群算法相比,表明SDAPSO是求解该类问题的一种有效方法。     

基于交通信息和配电网全成本电价的电动汽车充电负荷调度方法

电动汽车的集中充电行为会在一定程度造成交通拥堵,为解决这一问题,综合考虑交通信息和电网信息,基于边际定价理论得到配电网节点边际电价和交通阻塞成本,构建电动汽车充电的全成本电价模型。在此基础上,提出一种考虑交通信息和配电网全成本电价的电动汽车充电负荷调度方法。通过仿真算例验证,该方法在满足电动汽车充电需求的同时可以有效缓解交通拥堵。     

基于改进深度强化学习的智能微电网群控制优化方法

针对微电网群控制的经济效益、负荷波动以及碳排放问题,提出一种基于改进深度强化学习的智能微电网群运行优化方法。首先,计及分布式电源、电动汽车及负荷特性,提出微电网的系统模型。然后,针对微电网群的运行特点,提出4个系统优化目标和5个约束条件,并且引入分时电价机制调控负荷运行。最后,利用改进深度强化学习算法对微电网群进行优化,合理调控多种能源协同出力,调整负荷状态,实现电网经济运行。仿真结果表明了所提方法的有效性,与其他方法相比,其收益较高且碳排放量较小,可实现系统的经济环保运行。     

电动车制动能量再生反馈控制研究

研究了电动汽车制动过程中的能量回馈，设计了混合励磁无刷电动机在汽车制动过程的能量再生反馈控制系统。以脉宽调制调压调速系统为例，研究各种制动态下的能量回馈过程。并将其安装在EV6600电动汽车上进行试验，结果表明：该控制系统可达到10%左右的能量回收效率。     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

线控制动系统在轮式工业车辆上的实现

介绍了车辆线控制动系统BBW(Brake By Wire)的基本结构及原理，对线控技术在轮式车辆全动力制动系统上的实现进行了探讨。     

2000年—2001年磁性功能材料研究和应用新进展

综述了磁性功能材料研究和应用在2000年－2001年间的新进展，其内容包括：（1）自旋电子学；（2）Bi-Fe氧化物的磁性；（3）稀有和稀土金属垂直磁记录材料；（4）新的多层膜磁性材料；（5）磁浮列车。     

蠕墨铸铁在铁道车辆制动系统中的应用研究

在分析车辆制动器摩擦温度场的基础上 ,研究蠕墨铸铁在铁道车辆制动系统中的使用性能 ;研究结果表明 ,在车辆制动器服役条件下 ,摩擦速度与接触压力的提高 ,摩擦副的摩擦系数显著降低 ,磨损率显著增加 ;在所研究的不同石墨形态的铸铁中 ,蠕墨铸铁不但具有低而稳定的磨损率 ,而且具有高而稳定的制动性能 ,是制造车辆制动器部件的合理选材。     

Axial characterization of catalytic activity in close-coupled lightoff and underfloor catalytic converters

A exhaust system consisting of a close-coupled Pd technology 32 in³ lightoff converter and Pt/Rh technology 170 in³ underfloor converter was vehicle-aged for 56000 miles on a vehicle equipped with a 3.8 l engine. Following this aging, the converters were taken off the vehicle and cut into 1″ thick sections along their axis and characterized for lightoff and warmed-up activity using a laboratory reactor to simulate vehicle exhaust. Each section was also analyzed for the quantity of oil additive poisons (phosphorus and zinc) deposited. Following this initial characterization, the phosphorus and zinc deposits were removed, and the sections were characterized again for lightoff and warmed-up activity. This procedure was used to qualitatively determine the relative contribution of oil additive poisoning and thermal sintering to the total activity deterioration as a function of axial position in the catalyst monoliths.

Analysis of the lightoff converter as taken from the vehicle showed a dramatic axial gradient in the lean and stoichiometric lightoff and warmed-up (600°C) performance for HC, CO and NO_x, with most of the deterioration having taken place in the forward-most 1″ section of the converter, which was consistent with the gradient in the deposition of phosphorus (P) and zinc (Zn) in this converter. Comparison of these data sets with those obtained after removal of the P and Zn poisons indicates that most of the total deterioration of lean HC and CO activity can be attributed to P and Zn poisoning of the forwardmost 1″ section. When tested under stoichiometric conditions, most of the deterioration of HC activity is attributable to P and Zn poisoning, while most of the deterioration of CO and NO_x activity is attributable to thermal deterioration. A similar activity and poison deposition gradient was detected in the underfloor converter, but to a smaller extent.     

Ca-P仿生人工骨材料的设计与制备

本文设计了用磷酸钙生物陶瓷制备仿生人工骨的工艺路线 ,从原料合成、材料成型和烧结等讨论了仿骨材料的制备方法