碳纤维表面电镀铜

研究了碳纤维表面进行镀铜处理的镀液组分及工艺条件。电镀前先在马弗炉中600～800℃下对碳纤维进行氧化处理。镀液采用水浴加热,温度控制在35～40℃,电流密度为0.5～2.5A·dm-2,最佳pH值为9.0±0.5。采用本实验工艺在碳纤维表面镀铜,效率高,镀层均匀,厚度为1.5～2.0μm,基本上消除了“黑心”现象。     

高耐蚀性热镀锌板的钝化处理工艺探讨

介绍了热镀锌板钝化膜的形成机理 ;针对攀钢热镀锌板出现白锈、黑斑等问题 ,分析了钝化液pH值、添加剂及操作条件对钝化膜质量的影响 ,同时提出了改进热镀锌板耐蚀性能的措施     

热释电传感器的非接触式测控系统设计

介绍了利用热释电红外传感器进行非接触式测温的基本原理、红外测温系统结构和信号处理电路的组成。以此为基础,设计了一套非接触式红外测温装置,用该装置测定了移动目标表面温度。在模拟实际场景应用时,实现了对较远距离的运动行人体温的准确测量;装置还增加了高温报警电路和蓝牙无线通信模块,丰富了使用功能。     

Suboptimal robust synthesis for MIMO plant under coprime factor perturbations

Suboptimal robust synthesis for MIMO nominal system under coprime factor perturbations is considered in classical and non-classical statements. In the classical statement, weights of perturbations and upper bound on magnitude bounded exogenous disturbance are assumed to be known to controller designer. Suboptimal synthesis within ε tolerance is reduced to the solution of log₂(1/ε) standard mixed sensitivity problems of ℓ₁ optimization. In the non-classical statement, the upper bounds on perturbations and exogenous disturbance are to be estimated from measurement data and suboptimal synthesis is reduced to the solution of 1/ε mixed sensitivity problems.     

control with limited communication and message losses

We propose an H^∞ approach to a remote control problem where the communication is constrained due to the use of a shared channel. The controller employs a periodic time sequencing scheme for message transmissions from multiple sensors and to multiple actuators of the system. It further takes into account the information on the random message losses that occur in the channel. An exact characterization for controller synthesis is obtained and is stated in terms of linear matrix inequalities. Furthermore, an analysis on the loss probabilities of the messages to accomplish stabilization is carried out. The results are illustrated through a numerical example.     

Stability of iterative processes with errors for a system of nonlinear -accretive variational inclusions in Banach spaces

In this paper, by using the concept of (A,η)-accretive mappings and the new resolvent operator technique associated with (A,η)-accretive mappings, we introduce and study a system of general mixed quasivariational inclusions involving (A,η)-accretive mappings in Banach spaces, and construct a new perturbed iterative algorithm with mixed errors for this system of nonlinear (A,η)-accretive variational inclusions in q-uniformly smooth Banach spaces. Our results improve and generalize the corresponding results of recent works.     

基于ADμC842单片机的数字式温度计的设计

针对传统的水银温度计易破损,读数误差大的问题,提出一种基于ADμC842单片机的数字式温度计,该数字式温度计克服了传统测量方法的缺陷,具有制作简单、操作简便、精度高、线形度好、性价比高等优点;介绍本装置的总体方案设计、软硬件设计及测试方案.测试结果表明,其各项指标均可达到日常测量要求.     

碳黑/聚乙烯醇电纺复合纤维的制备与气敏特性研究

通过碳黑(CB)/聚乙烯醇(PVA)混合溶液的电纺,制备了掺纳米CB的PVA复合纤维,用扫描电镜(SEM)观察了它的形貌。CB/PVA复合纳米纤维的形貌取决于混合物中CB的含量。随CB含量的增加,CB颗粒在纤维中的分布逐渐变得均匀;最佳CB/PVA的质量比为3∶10;继续增加CB含量,CB颗粒聚合成团析出,杂乱分布于PVA纤维中。乙醇蒸气测试表明:质量比为3∶10的CB/PVA纤维具有灵敏度高、响应恢复快等特点。     

炭黑/纳米Al2O3填充柔性压敏导电硅胶体系的研究

基于柔性触觉传感器中用到的压敏导电硅橡胶,研究添加纳米Al2O3对导电硅橡胶电特性的影响.从理论上研究纳米Al2O3改性的微观和宏观机理,并通过实验对添加不同量纳米Al2O3的压敏导电硅橡胶导电性、室温下的导电稳定性、压阻特性进行比较分析.实验结果表明:在炭黑浓度恒定的压敏导电硅橡胶中适量添加纳米Al2O3,可有效提高复合材料的导电性,稳定性,增大复合材料的压力敏感范围.     

DCS控制系统在蒸发工段的应用

分析了碱回收蒸发工段的工艺流程和控制要求,从硬件配置和软件设计等方面对碱回收蒸发工段进行了详细的叙述,同时采取软测量的方法测量黑液浓度,提出黑液浓度-压力串级控制方法;根据工艺要求设计出一种新型的DCS控制方法,它是由西门子公司的SIMATIC 400系列PLC连接ET200系列的分布式I/O系统及标准伺服控制系统组成的DP控制网络,通过相应的智能仪表及阀门对现场信号进行采集和控制;由此对碱回收蒸发工段实施集散控制的优化控制法案;工程实践表明,该系统在江苏甲乙粘胶公司生产线上投用,各种控制性指标能够很好地满足公司的要求。