转子叶片在非均匀来流条件下的流体激振特性

该文通过研究得出非均匀来流对转子叶片流体激振的三个重要特征 :非均匀来流相对于转子叶片的非定常流中主频分量是产生叶片动应力的决定因素 ;非均匀来流的非均匀度 (相当于非定常流的波幅 )大小和叶片流体激振的动应力大小成正比 ;转子叶片流体的定常压力水平与叶片动应力的水平密切相关。图 4表 2     

采用荷载平衡的概念表达预应力度及在初步设计中的应用

利用荷载平衡法的概念，将预应力度用等效荷载与外荷载的比值表达，设计可利用其比值确定预应力度，便其更简捷，明确，同时，提出了预应力度的真实值问题。     

采用激光光刀的叶片三维面形测量方法

提出一种采用激光光刀的叶片三维面形测量方法。介绍了方法原理、系统结构、信息获取与处理方案,并给出了对实际飞机发动机叶片的面形测量结果。     

不同类型在役抽油机机架受力分析

通过现场测试和检查,对油田特定区域内经过优化后的各种不同类型抽油机在额定载荷下的支架以及连杆受力情况进行了分析和评价。为在油田范围内进行机采设备的选型和推广提供一些参考。     

电解多功能天车打壳机构非正常失效的分析及解决方案

主要分析了电解多功能天车打壳机构中打击头、夹套、拉杆非正常失效的原因,并提出了解决的方案.     

Formation and investigation of epoxy intumescent compositions modified by active additives

Results are reported of research on intumescent composites based on epoxy resin cross‐linked with polyethylene polyamine and containing ammonium polyphosphate and such modifying additives as calcium borate, manganese dioxide, nickel, and chromium, containing tubulenes as gas‐formers and carbonization stimulators. The changes in composition and physicochemical properties of modified compositions under conditions of heat and fire were investigated by X‐ray photo‐electron spectroscopy, atomic force microscopy, and local force spectroscopy. Ammonium polyphosphate mainly stimulates carbonization processes on the inner surface of a bubble being formed during foam coke formation. The introduction of metal‐containing tubulenes leads to the formation of fire‐retardant and low flammability‐compositions with high coke and carbon structures content. The use of calcium borate in the compositions considerably increases the strength of foam coke being formed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1477–1483, 2002     

溢流反弧段水流边界层有关概念的探讨

本文对溢流反孤段水流边界层的定义方法进行分析讨论。在分析及弧段流速分布的基础上提出离心力附加边界层厚度和粗糙度附加边界层厚度的概念,研究了壁面曲率和壁面粗糙度对溢流反弧段边界层发展的影响。     

步行机攀登横杆的受力模型及分析

针对４足步行机器人的横杆攀登过程，在考虑弹性变形的基础上利用刚度矩阵建立其受力模型，并通过计算机仿真对攀登过程的不同情况进行了分析，其结果为具有攀登功能的步行机构结构设计及控制算法确定提供了理论依据。     

浅析底片加工缺陷产生的原因及解决方法

要得到影像底片,就必须经过曝光、显影、定影、水洗等冲洗工艺处理。在实际操作中,难免要受到工作环境(如显影液)的温度和人为或机械的影响,而产生一些不良的后果。经过实验,分析了影响影像质量的原因,发现了一些较为有效的处理办法。     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.