涡轮叶片专用探头研制与应用

介绍叶片专用探头设计原理，及其与SMART97型智能双频涡流探伤仪配套使用的情况，专专用探头在飞机发动机二级涡轮叶片探伤中具有良好应用前景。     

AN APPLICATION OF SPI TECHNIQUE FOR STUDING STRA DISTRIBUTION AT CRACK TIP

A computerized digital speckle-interferometry(SPI)system has been set up to determinethe in-plane distribution of displacement and strain at crack tip of CF specimens.Theprinciple and the experimental method of this technique are described in detail.Theeffect of corrosion factors on plastic deformation at crack tip in CF process has beenexamined by comparing the near-tip strain fields of steel A537 before and after hydrogencharging,and of pure copper before and after applying an anodic current in 3.5% NaCl.The results shows that the clasic finite element mathematical models are not suitable todescribe the near-tip deformation under the experimental conditions.Hydrogen chargingmade the crack tip plasticity decreased for steel A537 and the anodic dissolution enhancethe near tip deformation of pure copper specimen.     

Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

主动叶尖间隙模型预测控制系统设计与仿真

为将发动机全工况内叶尖间隙控制在最佳状态,首先,提出实现间隙主动控制的双闭环控制系统结构;其次,设计一种由多个电子机械式作动装置成的可变结构的机匣结构,并建立了其数学模型;然后,应用基于串级模型预测控制的主动间隙控制策略,完成了控制器的设计;最后,以某发动机叶尖间隙变化为被控对象,仿真验证了所设计系统.结果表明:所设计系统控制偏差≤0.01 mm,对对称性间隙变化和非对称性间隙变化的控制效果均较好,可为主动叶尖间隙控制的实现提供参考.     

一种基于MUSIC算法的涡街信号处理方法

针对涡街流量计易受管道振动和流场扰动引起噪声干扰的问题,提出了一种基于MUSIC算法的涡街信号处理方法.介绍了涡街流量计的测量原理,建立了噪声环境下的涡街信号模型,并阐述了MUSIC算法的基本原理,在此基础上,分别对多种噪声环境下的涡街信号进行仿真研究.仿真结果表明:所提的涡街信号处理方法能有效地抑制噪声,高精度地分辨频率点,对改善涡街流量计的性能有良好的效果.     

基于概率断裂力学的管道疲劳寿命分析

采用奇异单元模拟裂纹尖端应力场的奇异性,计算裂纹尖端的应力强度因子和张开应力.以概率论为基础,结合确定性疲劳断裂力学估算方法,考虑参数的不确定性和随机性,应用蒙特卡洛模拟法分析管道的疲劳寿命.结果表明：通过J积分计算得到的裂纹尖端张开应力与计算得到的管道工作应力基本相等.采用蒙特卡洛模拟法进行的一定可靠度和置信度下的疲劳寿命预测能反映评定参数的不确定性,较传统的断裂力学计算结果更安全.     

吉音水利枢纽竖井旋流泄洪洞水力特性试验研究

通过1∶30的水工模型对吉音水利枢纽竖井旋流泄洪洞的水流流态、压力分布、流量系数等水力特性进行了研究,分析了在进水口溢流堰末端增设掺气坎对进水口及竖井内流态及通气孔风速的影响。研究结果表明:在溢流堰末端增设掺气跌坎有利于减小溢流堰面的负压、防止空蚀破坏、简化进口体型设计,且有利于泄洪洞的安全运行。     

The inception cavitating flows over an axisymmetric body with a blunt head-form

The inception cavitating flows around a blunt body are studied based on flow visualizations and velocity field measurements. The main purpose of the present work is to study the incipient cavity evolution and the interplay between the inception cavitation and the local turbulent flows. A high-speed video camera is used to visualize the cavitating flow structures, and the particle image velocimetry(PIV) technique is used to measure the velocity field, the vorticity, and the Reynolds stresses under non-cavitating and inception cavitating flow conditions. It is found that the appearance of visible cavities is preceded by the formation of a cluster of micro-bubbles not attached to the body surface and in a hairpin-shaped vortex structure. During its evolution, the cavity moves downstream with a lower speed. The effect of the incipient cavity is significant on the local vortical structures but slight on the timeaveraged velocity distribution. The mean Reynolds stress distributions in the turbulent shear flow can be substantially altered by the incipient cavities. The presence of the incipient cavities can lead to the production of turbulent fluctuations.     

Visualization of vortex core polarity in NiFe nanodots by tilted Fresnel images

We illustrate an approach which allows determining the out-of-plane component of the vortex core (polarity) in NiFe nanodots using Fresnel imaging in Lorentz electron microscopy. Using tilted Fresnel images, contribution of the polarity is introduced into the Fresnel image. However, this contribution is relatively small and a difference image from two symmetrically tilted Fresnel images must be used to eliminate the strong contribution from the in-plane curling magnetization and non-magnetic contrast. The sense of the polarity appears as a bipolar white-black contrast in the difference image on the tilt axis. A vortex core with a diameter of 16.5±2.5 nm is experimentally measured. Image tilting, displacement and geometrical distortion may disturb the difference image, and hence subtraction of the difference image must be aligned by cross-correlation. The method is also justified by a study of the observed contrast characteristic due to misalignment. The method is confirmed to be superior to similar approach with direct interpretation of information and more information subtracted.