卡车纵梁及车厢边框冲孔线

介绍了轻、中型卡车纵梁及车厢边框加工新型数控冲孔生产线的结构、性能特点.生产线可实现卡车底盘纵梁及车厢边框的冲制,具有精度高、生产周期短、灵活性强等优点,并可大大减少生产环节的库存量.     

Ni3Al中B和Mg的非平衡晶界共偏聚

在1023－1373K的初始温度和0.05-268.91K/s的冷速范围内，用Auger剖层分析确定含B和Mg的Ni3Al合金中B和Mg的非平衡晶界共偏聚行为，按照溶质－空位复合体迁移机制所导出的描述非平衡晶界偏聚的扩散速率方程解析表达式，很好地模拟了本实验结果，并确定了Ni3Al-B-Mg合金中B及B－空位复合体，Mg及Mg-空位复合体的扩散系数及复合体激活能。     

鞍钢酸洗精整线开卷器卷简组合加工技术

针对鞍钢2^#酸洗生产线上的开卷器卷筒的结构，分析了卷筒组合加工的特点、加工步骤、应采取的工艺措施以及应注意的问题。     

镀锌钢管双引出工艺设备的探讨

分析了我国镀锌钢管双引出工艺设备的现状。介绍了星轮齿盘式与螺旋式双引出工艺设备的特点，指出双排螺旋机组的综合指标较高，并对齿盘式双引出机组的磁力辊道及镀后处理设备提出了改进设想。     

An extension of Wagner's analysis of competing scale formation

Wagner's criterion to predict the minimum concentration of solute (N _B(min) ⁰ )necessary for the exclusive formation of its scale has been modified to incorporate both thermodynamic and kinetics requirements. The analysis presented here involves a receding alloy/scale interface for which the composition of the alloy at this interface is governed by thermodynamic equilibrium between the two competing scale phases and the base alloy. This is a more rigorous analysis than that of Wagner's, who assumed the alloy/scale interface to be immobile and the solute composition at the interface to be zero. A comparison is made between values of N _B(min) ⁰ found experimentally and those predicted by Wagner's and the present criterion for a number of alloy-gas systems. It is shown that the criterion developed in the present analysis can often provide a better approximation of the actual N _B(min) ⁰ .The expressions derived from the present analysis have been extended also in a semiquantitative manner to provide a criterion for the minimum amount of solute in the alloy required for the transition from internal to external scale formation.     

晶界碳化物对Fe-Cr15-Ni25合金蠕变裂纹扩展行为的影响SCIEI

在两种不同晶界状态下研究了Fe-Cr15-Ni25合金的蠕变裂纹扩展行为。单相合金的空洞在晶界三叉点处形核,而对晶界上有碳化物析出的合金,空洞在晶界碳化物上形核。晶界碳化物阻碍了空洞的长大和连接,因而大大提高了蠕变裂纹扩展抗力。     

Monte-carlo modeling of grain growth in Zr equal channel angular pressed and recrystallized

Grain boundary character distribution in equal-channel-angular pressed Zr was studied. Using a die design of 90°/20° and an operation temperature of 350°C. The initial grain size of 20 μm was reduced to about 270 nm with 4 passes via route B_c. The grain growth kinetics of the recrystallized state was obtained by experiment and Monte-Carlo computer simulation, respectively, which showed good agreement. Based on kinetics and morphological characteristics, it was concluded that the grain coarsening mechanism was governed by normal grain growth. No sign of abnormal grain growth was detected either in the experiment or in simulation despite taking into consideration anisotropy in grain boundary energy as well as its mobility. This indicates that grain boundaries produced by severely deformed Zr are stable against explosive coarsening. The evolution characteristics of the microstructure in the present ECA pressed and recrystallized Zr differed from those of cold rolled Ti in that the grain boundary misorientation distribution and texture were rather stable during grain growth. Jointly Appointed by the Center for Advanced Aerospace Materials This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

MECHANISM OF NON-EQUILIBRIUM SEGREGATION OF SOLUTE TO GRAIN BOUNDARIES

本文以空位-溶质原子拖曳机制为基础,并考虑了空位、溶质原子和复合体三者的反应平衡及晶界平衡偏聚的作用,得到了溶质原子的非平衡晶界偏聚动力学方程。对硼在奥氏体中等温及连续冷却时所产生的非平衡晶界偏聚现象进行了理论计算,得到了与实验较为一致的结果。     

钛合金中亚晶的电子显微镜观察

用透射电子显微镜观察了TC6钛合金在高温退火过程中形成的亚晶(Subgrain)。合金经850℃,920℃退火后炉冷和空冷,在初生α相晶粒内形成亚晶,多为成簇分布的狭长形状,亚晶的数量随退火后冷却速度的增加而减少。亚晶界(Subgrain boundary)是由位错构成的,亚晶的形成是多边化(polygonization)的结果。     

Ni3Al合金中晶界与位错交互作用的研究

运用嵌入原子法势函数和静态驰豫最陡梯度的计算方法,原子模拟了Ni_3Al合金中晶界与位错的交互作用.主要研究了晶界与位错交互作用的能量特征、晶界结构单元的畸变行为和晶界附近位错的核心结构,并分析讨论了各种因素对它们的影响以及与Ni_3Al晶界韧脆行为之间的关系