Precise Determination of the MgAlON/(AlN+MgAlON) Phase Boundries in the MgO-AlN-Al2O3 Ternary System at 1600℃ and 1700℃

The accurate phase boundary of MgAION/(AIN+MgAION) in MgO-AIN-Al2O3 ternary system, has not been determined precisely so far. In the present study, the lattice parameters of MgAION solid solution with various compositions were determined precisely with X-ray powder diffraction. According to the relationship between the lattice parameters of MgAION solid solution and the contents of AIN and MgO, the phase boundaries of MgAION/(AIN+MgAION) in MgO-AIN-AI2O3 ternary system at 1600℃ and 1700℃ were precisely determined.     

斜线法井下联系测量的探讨及应用

通过斜线法进行导线传递,不仅从根本解决了传统三角联系测量方法所要求之客观条件的局限性,同时大大提高工程指导精度和测量工作效率。     

Lessons learned from the U.S. nuclear power Plant on-line monitoring programs

The investigation and application of on-line monitoring programs has been ongoing for over two decades by the U.S. nuclear industry and researchers. To this date, only limited pilot installations have been demonstrated and the original objectives have changed significantly. Much of the early work centered on safety critical sensor calibration monitoring and reduction. The current focus is on both sensor and equipment monitoring. This paper presents the major lessons learned that contributed to the lengthy development process including model development and implementation issues, and the results of a recently completed cost benefit analysis.     

液氢管路绝热设计与效果分析

通过总结液氢管路绝热设计和使用的经验,着重分析了夹层气体压强与漏热和表观导热系数以及气体压强回升与时间的定量关系,提出了工程设计中绝热性能及真空寿命的确定方法.     

秦沈客运专线路堑段基床结构动态测试分析

通过对我国第一条铁路客运专线———秦沈客运专线路堑段基床表层的动态测试,得到了厚度分别为40cm与60cm的基床表层在不同车速下的动应力与加速度值,分析了它们在基床表层横向与深度方向的分布规律及其与速度的关系。     

邯钢CSP粗轧机板坯对中原理分析与跑偏预防

介绍了邯钢CSP生产线粗轧机轧制时出现的板坯跑偏事故情况，对板坯通过粗轧机轧制时的跑偏量进行了理论分析，阐述了对粗轧机板坯跑偏进行控制的手段，提出了CSP生产线粗轧机板坯跑偏的预防方案。     

连续酸洗生产线钢卷数据跟踪的HMI设计

阐述了在酸轧联机后连续酸洗生产线的钢卷数据跟踪的设计，分别从HMI—INTOUCH软件的选用、生产线AB区数据跟踪的实现、动画实现的意义及HMI在机组上的成功应用逐一介绍。     

高速重轨生产线及武钢重轨生产线的建设

介绍了国内外100m及以上的高速重轨生产线,对生产线的生产设备、生产特点及生产产品分别进行了较为详细的叙述,并针对武钢的特点,对100m重轨生产线的改造提出了几点建议。     

特殊地形电力架空线的导线计算

电力架空线路是一项经常遇到的设计内容。当架空线路经过地形复杂的山区布线时,往往在悬挂导线的杆塔之间出现大高差或孤立档。用常规的平抛物线法计算导线的应力弧垂等参数的结果,与实际数值相差较大,这时需采用斜抛物线法来计算,本文对斜抛物线法的计算进行了探讨。     

高压气瓶爆裂失效分析

利用扫描电镜和能谱仪、金相显微镜等方法，对高压气瓶打压时在瓶颈处产生横向爆裂的原因进行了分析．得出结论：外来的铜蹭人管坯，高温加热时铜沿晶渗透造成晶界脆化、强度降低、沿晶开裂，导致气瓶打压时横向爆裂。