我国酒店业网络营销的现状及策略研究

酒店开展网络营销,就是对未来客源市场的战略考虑,是酒店进行市场竞争、实现酒店可持续性发展和建立酒店品牌意识的需要。借助网络的信息化平台开展酒店营销,已成为酒店竞争的新内容。然而,从我国酒店业的网络营销现状来看,还存在许多问题。针对这些问题,本文运用归纳和系统分析的方法,阐述了我国酒店业网络营销的现状,分析了我国酒店业开展网络营销的必要性以及存在的问题,提出了在新的形势下我国酒店业开展网络营销的相应策略。     

基于VVeb2.0数字环境的本土服装品牌发展策略研究

数字化虚拟经营正成为数字化知识经济时代下创意型本土服装品牌萌芽、发展的主要手段.首先通过对本土服装品牌数字化进程的阶段性划分、归纳以及Web2.0数字化环境的综合分析,总结出本土服装品牌存在的问题;通过分析问题成因及借鉴案例,探讨应对数字化环境的策略,并设计了一套针对性较强的品牌营销方案,以期能够帮助解决一些实际问题.     

基于空间分布特性和局部复杂度的显著目标检测算法

目前的视觉注意显著区域检测算法,主要依赖像素间的相互对比,缺乏从全局角度对显著目标的分析理解。依据显著目标是显眼、紧凑和完整的思路,提出一种基于目标空间分布特性和局部复杂度的无监督视觉注意显著目标自动提取算法。首先根据局部区域与其多个尺度邻域的对比,得到亮度显著图;然后利用颜色信息的显眼性、空间分布和区域一致性得到颜色显著图;同时通过对方向的空间分布和局部复杂度进行多尺度分析得到方向显著图;最后通过显著值的空间分布和面积增强因子相结合的融合策略得到输入图像的显著图,根据显著区域确定感兴趣区域位置,在基础上完成目标检测。将此方法应用于各类具有不同特点的彩色图像进行仿真实验,得到较好的检测结果,表明该算法是切实可行。     

Orientation angle workspaces of planar serial three-link manipulators

This paper presents a classification on the workspaces of planar serial three-link manipulators, that is, position workspace and orientation angle workspace. Position workspace indicates the region reached by the reference point on the end-effector. Orientation angle workspace indicates a set of angle ranges by which the end-effector can reach with certain orientation for every point in the reachable position workspace. By introducing a virtual equivalent mechanism, reachable position workspace can be divided into several Grashof intervals and non-Grashof intervals. The calculation equations of orientation angle workspace are deduced in three situations according to the relationships among four link lengths in the virtual four-bar chain. Three examples are given for three kinds of relationship of link lengths. The orientation angle workspace of extended groups, that is, two of the three link lengths equal, and the orientation angle workspace when the reference point on the end-effector moves along a non-radial direction are also discussed. A program is developed to calculate orientation angle workspaces and output variation curves of orientation angle workspace and key data within the position workspace. The approach and program in this paper can be used for fast calculation and identification of the variation rule of the orientation angle workspace of any given planar serial three-link manipulator on the basis of its link parameters, and for the design of a highly dexterous serial manipulator with proposed link relations. Supported by the Natural Science Foundation of Shanxi Province (Grant No. 20041070)     

我国个人所得税功能定位问题的思考

2009年我国税改的主基调是结构性减税,对于个人所得税改革的研究成为各界普遍关注的焦点之一。文章旨在探讨个税改革的一个前提性问题,即:我国个税的功能定位问题。文章借鉴西方经验,结合我国实际认为,现阶段个税成为我国税收体系主体税种的条件尚不具备,因此,目前我国个税应以调节收入分配功能优先。     

Evaluation of processing effects in injection‐molded amorphous and crystalline thermoplastics using an excimer laser

The ablation behavior of amorphous [polystyrene (PS), polycarbonate (PC)] and crystalline [PET, glass‐filled poly(butylene terephthalate) (PBT)] polymers by 248‐nm KrF excimer laser irradiation were investigated for different injection‐molding conditions, namely, injection flow rate, injection pressure, and mold temperature, as a possible method for evaluating processing effects in the specimens. For this purpose, dumbbell‐shaped samples were injection‐molded under different sets of processing conditions, and weight loss measurements were carried out for the different injection‐molding conditions. Some of the crystalline (PET) samples were annealed at different annealing times and temperatures. For PET, the weight loss decreased with increasing mold temperature and remained insensitive to injection flow rate. Annealing time and temperature significantly reduced weight loss in PET. For PBT, the weight loss due to laser ablation decreased with increasing material packing due to pressure, and it also showed some sensitivity to flow rate variation. The major effect was seen with glass‐filled PBT samples. The weight loss decreased drastically with increasing glass fiber content. Laser ablation allowed us to observe process‐induced fiber orientation by scanning electron microscopy in PBT samples. For PS and PC, the weight loss increased with increasing injection flow rate and mold temperature and decreased with increasing injection pressure. The position near the gate showed higher ablation than the position at the end for all the conditions. A decrease in the material orientation with injection speed and mold temperature led to an increase in the weight loss, whereas an increase in the injection pressure, and consequently orientation, led to a lower weight loss for PS and PC. Higher residual stress samples showed higher weight losses. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 2006     

Pore Propagation Directions in P+ Porous Silicon

A comparative study is presented on the pore propagation directions of porous silicon layers (PSL) formed on p⁺-type substrates of different orientations. PSLs were formed on plain (0 0 1) and (1 1 1) silicon wafers as well as on structured (0 0 1) wafers containing facets of various orientations. During anodization, regular pores follow the 0 0 1 direction on the (0 0 1) planes. While on the (1 1 1) planes fewer regular pores develop and seemingly propagate closely to the 1 1 1 direction. These results indicate that the pores propagate perpendicular to the surface i.e. along the field lines when the surface orientation is either (0 0 1) or (1 1 1).When the silicon surface provided (1 1 0) orientation (Chuang, Collins, and Smith, 1989), or its position is in between the (0 0 1) and (1 1 1) planes then the pores do not propagate perpendicular to the surface but along the 0 0 1 direction.All the phenomena exhibited might be explained by presuming that during formation, the pores propagate along the 1 0 0 directions, and that those 1 0 0 directions are preferred which are closely to the field lines. In PSLs formed on (0 0 1) surfaces the field lines and the 0 0 1 crystallographic direction are coincident. However, in the (1 1 1) oriented wafer where three equally probable 1 0 0 directions exist around the field lines, more irregular structure of PSLs will develop.     

Relationship between processing,microstructure, and mechanical properties of injection molded thermotropic LCP

A commercial thermotropic liquid crystalline polymer (LCP), Vectra A950, was injection molded into rectangular sheets of thickness ranging from 1 to 4 mm. By changing the thickness of the mold, the shear rate experienced by the TLCP melt in the mold could be varied. The 1‐mm test sample was highly anisotropic while that with larger thickness (4 mm) was less anisotropic. X‐ray diffraction profile at various depths for each of the test sample corresponded to the degree in the fiber orientation present in the test samples. The anisotropy can be described macroscopically by measuring the tensile strength and modulus in the longitudinal and transverse direction. The ratio between the longitudinal and transverse property decreases proportionally to the thickness of the test sample. This reduction corresponded to the reduction in the shear field as the thickness of the mold was increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1713–1718, 2003     

Diffusion of ellipsoidal granular particles in shear flow

The diffusion of nonspherical particles has not been well understood due to the complexity of their contact mechanics and self-organization of their orientations. We perform discrete element method simulations of monodisperse ellipsoids in a shear flow with Lees-Edwards boundary conditions to quantify the relation between the diffusion coefficient and the flow parameters. The results indicate that the particle aspect ratio strongly affects the diffusion coefficient by influencing the particle orientation and alignment. We develop a scaling law for the diffusion coefficient perpendicular to the flow direction, D_yy, which combines the influences of the shear rate , the solids fraction f, the effective particle diameter d_eff and the particle aspect ratio Z. We show that , where k_d is a dimensionless pre-factor, and a fit is obtained for the functional form of χ(f, Z). This scaling law will be useful in developing continuum transport models for applications.     

丝绸之路经济带（中国段）节点城市空间差异及发展布局

“丝绸之路经济带”作为多维度的国家战略构想,是新政经周期下中国总体区域发展重大战略之一,而沿线城市点、带、群是推进该项重大战略实施的现实载体。当前,“丝绸之路经济带”战略下的城市定位,往往与区域自身发展及利益诉求并不完全吻合,亟待对区域总体特征及发展现实以理性认知,防范城市“标签化”的盲动倾向。以“丝绸之路经济带”沿线区域关键节点城市客观空间状况与基本产业布局概貌为基础,采用多层次综合测度模型定量评价各城市综合竞争力,提出采取差异化的“点-轴”式带动策略是推进经济带整体发展的建设性思路,并结合城市经济地理特征探讨节点城市未来的发展布局定位问题。