Genome-Wide Analysis of the Late Embryogenesis Abundant (LEA) and Abscisic Acid-, Stress-, and Ripening-Induced (ASR) Gene Superfamily from Canavalia rosea and Their Roles in Salinity/Alkaline and Drought Tolerance

Canavalia rosea (bay bean), distributing in coastal areas or islands in tropical and subtropical regions, is an extremophile halophyte with good adaptability to seawater and drought. Late embryogenesis abundant (LEA) proteins typically accumulate in response to various abiotic stresses, including dehydration, salinity, high temperature, and cold, or during the late stage of seed development. Abscisic acid-, stress-, and ripening-induced (ASR) genes are stress and developmentally regulated plant-specific genes. In this study, we reported the first comprehensive survey of the LEA and ASR gene superfamily in C. rosea. A total of 84 CrLEAs and three CrASRs were identified in C. rosea and classified into nine groups. All CrLEAs and CrASRs harbored the conserved motif for their family proteins. Our results revealed that the CrLEA genes were widely distributed in different chromosomes, and all of the CrLEA/CrASR genes showed wide expression features in different tissues in C. rosea plants. Additionally, we introduced 10 genes from different groups into yeast to assess the functions of the CrLEAs/CrASRs. These results contribute to our understanding of LEA/ASR genes from halophytes and provide robust candidate genes for functional investigations in plant species adapted to extreme environments.     

具有直流故障穿越能力的模块化多电平换流拓扑推演与对比

直流故障具有影响范围广、故障电流大的特征,已成为制约直流系统发展的重要因素之一。模块化多电平换流器可通过配置双极性子模块实现直流故障穿越,但相比于基于半桥子模块的拓扑,其建造成本与运行损耗均大幅增加。为寻求兼顾硬件成本、运行效率与直流故障穿越能力的模块化多电平换流拓扑,首先通过拓扑抽象定义与模块配置约束,遍历并推导出4大类共13种模块化多电平换流拓扑;进而优选出T型桥臂交替多电平换流器,并提出桥臂移相导通调制,实现其高效功率变换与直流故障穿越的兼顾;最后,计及硬件成本、运行损耗、可靠性与可实现性等维度,对各类具有直流故障穿越能力的拓扑进行了系统性对比,为具有故障穿越能力需求的交直流变换场景提供模块化多电平换流拓扑的选择依据。     

关注区可变的实时仿真方法与平台

交直流混合电网的实时仿真既要考虑电力电子设备的开关特性,又要保证适应较大的电网规模,在实际工程中面临诸多困难.给子网络赋予动态可变的关注标志,对关注子网络采用存储压力小的节点消去法,对非关注子网络采用计算量少的线性组合法,从而保证骨架型节点电压法的实用性.在Xilinx公司的Virtex-7 FPGA VC709开发板中,采用无缝的并行化仿真计算程序对接方式和灵活的结构参数查询方法解决了现场可编程逻辑门阵列资源的紧缺问题,设计了一种关注区可变的实时数字仿真平台.以典型的交直流混合电网为例,仿真验证了所提方法的可行性与所研发平台的有效性.     

基于储能型柔性多状态开关的直流微电网与交流配电网柔性互联策略

柔性多状态开关大多采用"刚性"的变流控制策略,导致其端口惯性与阻尼不足,直流微电网通过其接入时难以与交流配电网进行柔性互联,无法响应交流配电网调频调压.为此,提出一种基于储能型柔性多状态开关的直流微电网与交流配电网柔性互联策略,交直流端口统一采用虚拟电机控制,通过模拟电机的惯性和阻尼特性使交直流端口呈现柔性特性,同时针对馈线负荷不均衡问题提出一种考虑直流微电网功率交互的负荷均衡策略.仿真结果表明,所提策略能够降低直流微电网波动对交流配电网的冲击,增强直流母线电压的稳定性,主动响应交流配电网调频调压,实现了馈线负荷均衡,提升了柔性多状态开关的调控灵活性.     

基于模型预测控制算法的多风储直流微电网分布式电压二次控制策略

针对含多组风储单元的直流微电网中蓄电池的电压优化控制问题,提出了一种基于模型预测控制算法的分布式电压二次控制策略.设计了一种多步长预测一致性模型作为电压预测模型,通过目标函数最小化求解预测系数,得到最优电压二次控制补偿量加入一次控制中,将传统一致性算法中比例积分控制器下的偏差调节问题转化为模型预测控制器下的电压跟踪问题进行求解,从而实现对直流母线电压动态响应的滚动优化.该方法有效解决了传统一致性算法下电压控制策略瞬态特性差和部分工况下存在控制误差等问题,并通过MATLAB/Simulink仿真平台搭建模型验证了不同工况下所提策略的有效性和优越性.     

一种反激式双输出DC/DC变换器的设计与实现

针对市场上DC/DC开关电源高压输出时,输出电压纹波较大问题,介绍了一种±50 V双输出DC/DC开关电源的设计方法及测试结果。该电路采用电流控制型PWM控制芯片,工作于反激模式。输入输出通过光耦实现隔离。该DC/DC变换器具有带负载能力强、纹波低、输出电压高等特点,可为电子设备提供稳定的供电电压。     

The Effect of Aluminum Ions on the DC Etching of Aluminum Foil

A study has been made of the electrochemical etching of 99.99% aluminum foils at a current density of 50 mA cm^–2in AlCl₃–HCl solutions (1 m Cl^–) at 80 °C. The solutions were made by dissolving metallic aluminum into 1m HCl solution, to give a Cl^– concentration of 1 m. The number density of etch tunnels and the homogeneity of tunnel length decreased, and the mean pit size and its standard deviation increased with increasing Al³⁺ concentration. The results were discussed based on potential transients at a current density of 50 mA cm^–2, current–potential curves at a scan rate of 10 m Vs^–1 and electrochemical impedance spectra.     

一种低交叉调整率的四路输出DC/DC变换器设计

介绍了一款四路输出DC/DC变换器的设计,并给出了主要技术指标、组成方框图、电路原理图和变压器的绕制方法。该设计在保证纹波噪声、效率、体积和重量等重要指标均满足要求的情况下,仍具有低交叉调整率的突出优点。     

基于LabVIEW的航空无刷同步电机监控系统设计

针对航空无刷同步电机起动控制过程复杂,需要监测的状态与控制的参数过多,造成调试困难及存在安全隐患的问题,利用LabVIEW开发环境设计了航空无刷同步电机起动运行监控系统。该监控系统基于Modbus通信协议编写,具有很好的通用性。通过在航空无刷同步电机起动控制实验中的应用,验证了该监控系统具有良好的实用性和可扩展性。     

两种高压直流电源的比较及在铜冶炼烟气制酸装置电除雾器中的应用

论述恒压源与恒流源两种高压直流电源的工作原理和技术特点.对两种电源常见故障的原因进行分析，提出相应的解决方法。介绍两种电源在230kt／a诺兰达炉冶炼烟气和270kt／a转炉冶炼烟气制酸装置的电除雾器中的使用情况.