Assessment of the types of public building maintenance contracts in Saudi Arabia

The study revealed that Fixed Price, Cost Plus and Purchased Labour contracts are the top three maintenance contracts adopted whilst Unit Price, Cost Plus A Percentage Fee contracts are alternatives used in the Kingdom. Some other types of maintenance contract were thought to be inappropriate by ministry departments.     

建筑构件积木式CAD软件研究

西方以混凝土坝内廓道施工样图设计阶段为例，论述水工建筑件积木式ＣＡＤ软件的必要性和积木模块ＣＡＤ软件的具体实现方法。     

建筑容积率对地价影响规律及修正方法研究

在分析建筑容积率对土地价格影响的作用机制和规律的基础上，针对目前土地估价工作中，容积率修正系数确定存在的问题，提出新的容积率修正思路和方法。     

An investigation of pore cracking in titanium welds

Two welded Ti-6A1-4V pressure vessels leaked prematurely in service. The leaks were caused by cracks emanating from weld porosity. The cracks originated during fabrication, with subsequent growth in service leading to the formation of the leak paths. Pore cracking is thought to be caused by a mechanism that involves both sustained-load and cyclic contributions, with the former being the more prominent. It is shown that the tendency for cracking is influenced by pore position and that pore size is not a deciding factor in that regard. The factors that govern pore cracking are discussed, and the possible role of interstitial embrittlement is assessed.     

The chloride stress-corrosion cracking behavior of stainless steels under different test methods

Chloride-induced stress-corrosion cracking (SCC) is one of the failure modes of stainless steels. Highly alloyed austenitic stainless steels S32654, S31254, and N08028, and duplex grades S32750 and S31803 possess much improved resistance to SCC compared with S30400 and S31600 steels. With the development of a database, SSData, experimental data collected from calcium chloride tests, autoclave tests, and drop evaporation tests were evaluated. Stress-corrosion cracking data generated by autoclave tests agreed well with the practical service conditions and can be used to discriminate alloys for SCC resistance in sodium chloride solution. Drop evaporation test data can be used in situations where evaporation may occur and cyclic loading may be involved. The SCC resistance of alloys under each method increased with increasing molybdenum equivalent Mo + 0.25Cr + 0.1Ni. For a given alloy, the testing result depends on the stress state and environment; different test methods can give different ranking orders concerning SCC resistance. The performance of duplex stainless steels in a chloride-containing environment at higher temperatures was not as good as expected when dynamic loading was involved.     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

旧工业建筑的再利用

旧工业建筑与其他旧建筑物相比,具有建筑主体结构坚固,空间高大灵活;体量大,拆除或新建对环境造成的影响大;具有其独特的设计理念和美学价值等特点,从而成为旧建筑再利用过程中一种重要的建筑类型。 本文通过对101厂房再利用案例设计过程的分析,对旧工业建筑再利用的目标、更新程序、方式、策略等方面进行具有可操作性和推广性的探索。     

重新认识摩天大楼的安全性--9·11撞击事件给人的反思

9·11恐怖撞击事件,促使人们重新认识摩天大楼的安全性,由于这类建筑规模越大,其安全性受到的损害就越大,同时也带来其他方面的问题.因此,为减少灾害发生后的损失,必须控制其规模,确保摩天楼建设有序进行.     

采用荷载平衡的概念表达预应力度及在初步设计中的应用

利用荷载平衡法的概念，将预应力度用等效荷载与外荷载的比值表达，设计可利用其比值确定预应力度，便其更简捷，明确，同时，提出了预应力度的真实值问题。     

Visual C++与Fortran混合编程及Matcom绘图在空调负荷计算软件中的应用

介绍利用VC与Fortran进行混合编程，将Visual C 程疗从DOS环境下移植到期Windows环境下，并利用Matcom对数据进行可视化的方法。