高纯硼烷中杂质的低温气相色谱分析

用低温色谱法解决硼烷的分解问题，使硼烷中氢的分析成为可能，该法又能消除硼烷和四硼烷（B4H10)对氧、氮和甲烷峰测定的干扰，此方法的建立使硼烷的标准制定成为可能。     

中厚板表面质量分析

在对济钢中厚板各种表面缺陷产生原因和几率进行综合分析的基础上 ,将缺陷分为 3类 :A类(折叠、麻点、划伤等 )、B类 (夹杂、结疤、分层 )、C类 (裂纹 ) ,重点对裂纹缺陷进行探讨 ,并提出了相应的改进措施。     

应用德国PAR88挤出机生产PVC异型材的工艺研究

从控制PVC异型材挤出机的工艺参数的角度，分析并论述了挤出机工艺参数对PVC异型材低温落锤性能的影响。     

Measurement of Thermal Diffusivity at Low Temperatures Using an Optical Reflectivity Technique

An experimental arrangement has been developed for measuring the transient temperature responses and the thermal diffusivities of foil materials in the range of 10 to 300K by using the optical reflectivity technique. The cryogenic system with optical windows is designed to provide temperatures from 10 to 300 K. The front surface of a foil specimen is heated by a pulsed Nd:YAG laser. In situ measurement of the reflectivity of a continuous-wave He–Ne laser at the rear surface is conducted on the microsecond time scale. Using the temperature dependence of reflectivity, the transient temperature response is deduced. The thermal diffusivity is obtained by fitting Parker's formulae to the experimental data on temperature rise. Stainless-steel foils are chosen as samples and are studied in the region from 10 to 300 K. The accuracy is examined by comparing the present results with the theoretical temperature responses and thermal diffusivity data from the literature. Good agreement is observed.     

钢筋混凝土圆形水池裂缝分析与处理

本文针对某钢筋混凝土圆形水池在使用过程中出现的裂缝进行计算和分析，讨论了温度对水池的影响，特别是考虑储水区与非储水区存在温差的条件对水池池壁裂缝的影响，并提出处理方案。     

测定钠中杂质的手动阻塞计的研究

文章介绍了测定钠中杂质浓度的手动阻塞计的原理、装置和实验结果。为了减少测量误差,我们研究了影响准确测定阻塞温度的因素,并且找到了减少测量误差的办法。在同样的杂质饱和温度下,该阻塞计测得的高、低阻塞温度所对应的杂质浓度差是很接近的。对氧其差值为1.03ppm;对氢为0.0763ppm。     

SO2转化温度异常情况分析

结合凤山实业总公司硫酸车间 SO2 转化系统的具体工艺流程 ,分析近几年转化系统出现温度不正常的原因 ,提出解决方法     

高雷诺数下双圆柱绕流的数值模拟

本文使用表面涡法研究高雷诺数下不同排列方式双圆柱绕流的流动状态，计算了双圆柱在并列、串列及级列的情况下的各种流动结构，涡街的变化及作用在圆柱上的受力情况。本文结果清楚地描述了双圆柱绕流复杂的流动状况，计算结果与实验显示的流动状况十分相似，斯特罗哈数和阻力系数与实验结果符合得很好。     

High temperature controlled atmosphere experiments for catalysts in a transmission electron microscope

A new transmission electron microscopy (TEM) specimen preparation procedure for high temperature experiments using a controlled atmosphere specimen holder (HTCASH) has been developed. It is designed for studying the microstructure of catalyst specimens before and after treatments in various gases. The procedure involved (1) finding a new formula for the embedding material, (2) devising a new method of making specimen supports, and (3) developing a method for removing the embedding material after the specimen has been microtomed. These techniques were then brought together to produce the ideal specimens for the HTCASH experiments. As an extra benefit, this procedure is also suitable for preparing specimens for ultrahigh resolution imaging experiments. The application of the new procedure in HTCASH experiments is illustrated through a high temperature reduction of a Co/SiO₂-923 catalyst.     

白钨矿浮选731捕收剂低温乳化试验研究

介绍了731捕收剂在低温条件下试验的情况。试验研究结果表明，采用A和B药剂以5：6的比例混合组成的复合乳化剂对731进行乳化，低温时乳化体系稳定性好，浮选过程中降低乳化731的用量，同时提高了选择性，降低了浮选成本，实现了低温环境下白钨矿正常浮选作业，达到选矿技术攻关指标。