Synergistic Flame Retardant Effects of Carbon Nanotube-Based Multilayer Nanocoatings

In an effort to develop highly functionalized flame retardant materials, hybrid nanocoatings are prepared by alternately depositing a positively charged polyaniline (PANi) and negatively charged montmorillonite (MMT) using the layer-by-layer (LbL) assembly technique. Carbon nanotubes (CNTs) are employed in polymer nanocomposites as effective reinforcement, where nanotubes are stabilized in MMT aqueous solution. The 3D structure and high density of CNTs deposited in the PANi/CNTs-MMT multilayers produce thicker and heavier coatings in comparison to the LbL assemblies without CNTs. Vertical and horizontal flame testing show that the incorporation of CNTs improves fire resistance. Additionally, cone calorimetry reveals that stacking two nanomaterials (MMT and CNTs) in a single coating shows a significant reduction in peak heat release rate (up to 51%), total smoke release (up to 47%), and total heat release (up to 37%) for the polyurethane foam. The enhancement of flame retardancy is attributed to a synergistic effect; MMT serves as a physical barrier that retards the diffusion of heat and gas. The addition of CNTs strengthens the thermal stability and high char yield. These results, coupled with the simplicity with which the LbL deposition is applied, present a viable alternative to halogen-free flame retardant nanocoatings to natural and synthetic fibers.     

3D Printing Conductive Composites with Poly(ionic liquid) as a Noncovalent Intermedia to Fabricate Carbon Circuits

In this study, a kind of imidazole type poly(ionic liquid) ([PEP-MIM]Cl) is synthesized, which can disperse carbon effectively. [PEP-MIM]Cl is used as an intermediate to coat carbon on the poly(acrylic acid)(PAA-co-MBA) via ion exchange to obtain conductive polymer composite (CPC). A series of characterizations are performed. Experiments show that carbon can be coated on the PAA-co-MBA uniformly, and compared with using carbon as filler, this method requires less carbon to achieve good conductive performance. The carbon layer on the polymer's surface is enriched via the swelling-shrinking properties of PAA-co-MBA according to the SEM images. Furthermore, in combination with 3D printing technology, PAA-co-MBA can be designed into different shapes to achieve various functions such as pressure-sensing element. Finally, a new type of CPC named carbon clad polymeric laminate (CCPL) is prepared by using the carbon coating method and 3D printing technology. It has the potential to replace copper clad laminate (CCL) and printed circuit board (PCB), to a certain extent. This technology expands the preparation method and application of the CPC such as flexible and wearable conductive fabrics.     

NiFeAlO4载氧体制备及煤化学链燃烧反应特性

铁基载氧体是一种具有工业应用前景的载氧体,但存在氧利用率低、在高温下易烧结等问题。虽可通过制备双金属复合载氧体或添加惰性组分改进其性能,但均存在一定缺陷。若将活性组分和惰性材料融入到一个晶体结构制备尖晶石结构载氧体,则可实现利用双金属协同作用提高载氧体活性的同时,利用Al3+提高载氧体的稳定性。采用共沉淀法和溶胶凝胶法制备了具有尖晶石结构的NiFeAlO₄载氧体,考察了制备方法、载氧体与煤质量比对NiFeAlO₄载氧体化学链燃烧特性和循环稳定性的影响,并分析了载氧体对煤转化过程的作用。结果表明,溶胶凝胶法制备的NiFeAlO₄载氧体具有更好的反应性,载氧体与煤质量比为20∶1时,碳转化率为86.7%,远高于煤单独热解时的碳转化率(34%),此时CO₂体积分数为93.6%。对反应前后NiFeAlO₄载氧体晶相结构和形貌进行分析,表明循环过程中经“还原-氧化”后生成的NiO和载氧体颗粒团聚是导致载氧体活性下降的主要原因。相较于载热作用,NiFeAlO₄载氧体在煤化学链燃烧中主要起供氧作用,其不仅会促进挥发分向煤气的转化,且NiFeAlO₄载氧体与焦炭之间也存在固-固反应,利于更多CO₂的生成。     

Electrochemical and analytical study of corrosion inhibition on carbon steel in HCl medium by 1,12-bis(1,2,4-triazolyl)dodecane

1,12-bis(1,2,4-triazolyl)dodecane (dTC12) is an excellent corrosion inhibitor for carbon steel in deaerated 1 M HCl solution. In this work electrochemical and analytical techniques were used to study the inhibition of corrosion on carbon steel in acidic medium. The carbon steel corrosion inhibition of dTC12 was attributed to the synergistic effect between chloride anion and quaternary ammonium ion. The protective efficiency of the film was higher than 90%, indicating that corrosion of carbon steel in 1 M HCl is reduced by dTC12.The effect of dissolved oxygen on the inhibition efficiency was also investigated. The results show that the inhibition efficiency increases in early stage and decreases for a long immersion time.     

含钼废渣冶炼钼铁的优化试验

利用含钼废料钼酸钙为原料,采用碳还原法冶炼钼铁,通过单因素分析试验及正交试验优化得出最佳的试验条件,钼酸钙加入量应低于10%,熔炼温度为1 525 ℃,保温时间为25 min,碱度为1.3。通过XRD、SEM、EDS分析得出用此方法生产得到的钼铁合金中,钼以Mo₂C、Fe₃Mo以及Fe₃Mo₃C的形式存在,渣系为二元玻璃渣系,具有与普通玻璃相似的成分系统。经测定合金中钼的回收率大于99%,钼资源回收效益可观。     

Effects of catalyst precursors on carbon nanowires by using ethanol catalytic combustion technique

Iron nitrate, nickel nitrate and cobalt nitrate were used as catalyst precursors to study their effects on carbon nanowires synthesized by ethanol catalytic combustion （ECC） process. The as-grown carbon nanowires were characterized by means of scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The results show that relatively uniform nanowires will be formed when the catalyst precursor is iron nitrate; while helical structure or disordered structure will be formed when the catalyst precursor is nickel nitrate or cobalt nitrate. precursor     

锰含量对衬板用低碳高合金钢组织和性能的影响

用光学金相显微镜、衍射仪及显微硬度计，研究了锰含量对衬板用低碳高合金钢组织和性能的影响。结果表明，当锰含量由2．0％增加到3，0％时，合金的退火态组织由上贝氏体＋屈氏体转变为马氏体，淬火回火后均为单相板条马氏体组织。随锰含量的增加，硬度稍有增大，冲击韧度下降，均匀耐腐蚀性有所降低。含锰量为2％的低碳高合金钢达到了矿山用衬板的使用要求，从成本考虑，是更经济的。     

类金刚石膜的制备及其影响因素

概述了近年来制类金刚石膜的新技术如双射频辉光放电（RF－RF）法，射频－直流辉光放电（RF－DC）法和微波－射频（MW－RF）法等，并且对影响类金刚石膜制备及性能的因素如基体材料，制备类金刚石膜时在膜中添加元素，类金刚石膜与基材之间的中间层等进行了较全面的分析。     

1.4%C超高碳钢显微组织与疲劳性能的研究

对1．4％C超高碳钢试样热处理后的疲劳极限与断裂韧性进行测定，观察了显微组织与试样断口。结果表明，经950℃淬火700℃回火热处理后，又经860℃正火处理，试验用钢的组织结构超细化且碳化物弥散均匀分布，获得良好的综合强度与韧性及较高的疲劳极限，断裂强度较40CrNiMo调质态提高48％，屈服强度提高15％，延性指标相当，是一种优良的结构钢材料。     

制氢装置弯头爆裂原因及措施

分析了制氢装置中变气蒸汽发生器出口弯头在不到 半年时间内出现两次冲刷减薄爆裂的原因，并提出采取更换材质、扩大管径、控制工艺指标及优化原料等预防措施.