高碳铬铁降碳探讨

介绍了在12 5MVA电炉上进行高碳铬铁降碳的试验情况 ,分析了影响FeCr67C6 0合金含碳量的因素 ,从理论和实践两方面阐述了降碳措施     

Analysis of thermodynamics and kinetics of titanium between top slag and liquid steel

Titanium is an impurity element in some special steel grades.The existence of titanium decreases the grain size and lowers the yield strength,resulting in low quality of these steels with regard to various properties.Thus,the titanium content should be reduced to the minimum.Based on the industrial production of ultra-low carbon Al-Si killed steel,this paper investigated the physical-chemical behaviors of titanium with and without desulfurization during RH refining.The influences of Ti content in hot metal,ladle slag composition,and ladle slag quantity,etc.,on the Ti content in refined liquid steel were discussed.The results show that the partition ratio of titanium between ladle slag and liquid steel is inversely proportional to the Al content to the power of 4/3,and the empirical formula regressed from practical experience can be expressed as w(TiO2)/w[Ti]=48/w[Al]4/3.Maximum partition ratio of titanium between top slag and liquid steel can be ensured by an optimum slag composition including components of FeOx and Al2O3 and an appropriate slag basicity.The contents of FetO and Al2O3 should be controlled above 6% and below 20% respectively and the slag basicity should be kept within 1.5 to 3.0.Moreover,desulfurization refining in the RH vacuum will decrease the partition ratio of titanium between ladle slag and liquid steel significantly.To keep the Ti content stably below 15×10-4% in a 300 ton ladle,the Ti content in hot metal must be lower than 500×10-4% and the thickness of ladle slag carried over from BOF slag must be less than 50 mm.     

低碳耐材在连铸极低碳钢和纯净钢生产中的应用

主要介绍武钢第二炼钢厂在连铸极低碳钢和纯净钢时，为确保减少连铸过程中钢水增碳．开发和应用了低碳钢包砖、大包保护管以及中间包浸入式水口，并取得了良好的使用效果。     

Effect of Carbon Properties on Melting Behavior of Mold Fluxes for Continuous Casting of Steels

Mold fluxes are synthetic slags used to coverthe liquid steel meniscus during continuous castingof steel.The flux,whichis continuously fed on thesurface of liquid pool during casting,melts first andthenflowsintothe gap between mold wall and solid-ified steel shell.It is well known that the perform-ance of the flux can greatly affect both the castingoperation and product quality.Because of its i mpor-tance,intensiveinvestigations have been performed,and considerable progress has been made[1-6].…     

石墨烯/碳纤维/芳纶电磁屏蔽纸的制备与性能研究

本研究以耐高温的芳纶短切纤维和芳纶沉析纤维为纸基纤维材料,导电性优良的碳纤维为导电骨架,石墨烯为电磁屏蔽增强材料,结合抄纸和涂布工艺制备得到石墨烯/碳纤维/芳纶电磁屏蔽纸。结果表明,制备的石墨烯/碳纤维/芳纶电磁屏蔽纸具有“三明治结构”,其厚度为333.9 μm时,在X波段的电磁屏蔽效能SE_T高达70.3 dB,电导率高达1 685 S/m,兼有较好的耐高温性和耐腐蚀性。     

Dielectrophoresis‐Assisted Integration of 1024 Carbon Nanotube Sensors into a CMOS Microsystem

Carbon‐nanotube (CNT)‐based sensors offer the potential to detect single‐molecule events and picomolar analyte concentrations. An important step toward applications of such nanosensors is their integration in large arrays. The availability of large arrays would enable multiplexed and parallel sensing, and the simultaneously obtained sensor signals would facilitate statistical analysis. A reliable method to fabricate an array of 1024 CNT‐based sensors on a fully processed complementary‐metal‐oxide‐semiconductor microsystem is presented. A high‐yield process for the deposition of CNTs from a suspension by means of liquid‐coupled floating‐electrode dielectrophoresis (DEP), which yielded 80% of the sensor devices featuring between one and five CNTs, is developed. The mechanism of floating‐electrode DEP on full arrays and individual devices to understand its self‐limiting behavior is studied. The resistance distributions across the array of CNT devices with respect to different DEP parameters are characterized. The CNT devices are then operated as liquid‐gated CNT field‐effect‐transistors (LG‐CNTFET) in liquid environment. Current dependency to the gate voltage of up to two orders of magnitude is recorded. Finally, the sensors are validated by studying the pH dependency of the LG‐CNTFET conductance and it is demonstrated that 73% of the CNT sensors of a given microsystem show a resistance decrease upon increasing the pH value.     

定向/有序碳纳米管制备的研究进展

综述了国内外有序、定向碳纳米管制备的研究进展。着重介绍了模板法和等离子体增强化学气相沉积技术在碳纳米管制备方面的应用，并就制备原理、影响因素等作了简单介绍。     

石墨镶嵌Co纳米晶的形成及其特性

用直流碳弧法在阳极石墨棒中加入金属Ｃｏ产生石墨镶嵌Ｃｏ纳米晶,研究在复合石墨棒中加入不同的Ｃｏ含量对石墨镶嵌Ｃｏ纳米晶的形貌、结构特性及晶粒尺寸分布的影响,探讨石墨镶嵌Ｃｏ纳米晶的形成原因及碳弧法中氦气压力和Ｃｏ含量对掺Ｃｏ阳极石墨棒所产生的碳灰的Ｃ６０／７０产率的影响。结果表明,复合阳极棒中的Ｃｏ含量决定了石墨镶嵌Ｃｏ纳米晶的数量和晶凿直径分布,碳弧法中的Ｈｅ气压力仍是影响掺Ｃｏ阳极棒所产生的碳     

Myoglobin/gold nanoparticles/carbon spheres 3-D architecture for the fabrication of a novel biosensor

A novel biosensor based on a myoglobin/gold nanoparticles/carbon spheres (Mb-AuNPs-CNs) 3-D architecture bioconjunction has been fabricated for the determination of hydrogen peroxide (H₂O₂). Cyclic voltammetry (CV), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to characterize the bioconjunction of the AuNPs-CNs with Mb. Experimental results demonstrate that the AuNPs-CNs hybrid material is more effective in facilitating electron transfer of the immobilized enzyme than CNs alone, which can be attributed to the unique nanostructure and larger surface area of the bioconjunction. The biosensor displayed good performance for the detection of H₂O₂ with a wide linear range from 0.28 μmol/L to 116.5 μmol/L and a detection limit of 0.12 μmol/L. The Michaelis-Menten constant K _M^app value was estimated to be 0.3 mmol/L. The resulting biosensor exhibited fast amperometric response, and good stability, reproducibility, and selectivity to H₂O₂. This article is published with open access at Springerlink.com     

Microstructure and properties of nc-TiC/a-C∶H films deposited by radio frequency reactive sputtering

Abstract

Amorphous carbon films containing titanium carbide (nc-TiC/a-C∶H) were deposited onto n-type silicon (100) by radio frequency reactive sputtering titanium target in an Ar–CH₄ mixed atmosphere. The composition and microstructure of the films were characterised by means of X-ray photoelectron spectroscopy, field emitted SEM, XRD and Raman spectra. The mechanical and tribological properties of the films were measured by a nanoindentation tester and a ball-on-disc UMT–2MT tribometer. By adjusting the CH₄ flowrate, Ti content in the films could be controlled, and a transition in structures of the films from loose polymer-like to glassy and dense nanostructure was observed. The density of coatings was improved by the introduction of TiC nanocrystalline particles. The mechanical and lubricious properties were different accordingly.